rt-4d/docs/SCT3258_packet_interface.txt

Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
 
 
Packet Interface of CT3258 
 
 
 
 
 
 
 
 
 
 
Version:1.0 
 
   Date: 2015/01/14 
 
 
 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
2
Change History 
 
Version 
Date 
Change Descriptions 
Author 
1.0 
2015/01/14 
Initial version 
Hao Ye 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
3
Contents: 
Packet Interface of CT3258 
1 
Change History 
2 
1 
Packet Interface Descriptions 
7 
1.1 
Packet Format 
7 
1.1.1 
START_BYTES 
7 
1.1.2 
LENGTH 
7 
1.1.3 
TYPE 
7 
1.1.4 
Packet Fields 
9 
1.1.5 
Parity Field 
9 
1.1.6 
Time Out 
10 
1.2 
Field Formats 
10 
1.2.1 
CHAN_D 
14 
1.2.2 
VOCODER_CMODE 
14 
1.2.3 
AFC_CONFIG 
15 
1.2.4 
COMPANDER_CONFIG 
16 
1.2.5 
VOCODE_TONE 
17 
1.2.6 
ANALOG_FEATURE 
19 
1.2.7 
VOCOER_SEL 
19 
1.2.8 
VOCODER_INI 
20 
1.2.9 
CHIP_RESET 
20 
1.2.10 
CHIP_LOWPWR 
20 
1.2.11 
PARITY_ENABLE 
21 
1.2.12 
ACK_MESSAGE 
21 
1.2.13 
WORK_MODE 
22 
1.2.14 
CARRIER_READY 
23 
1.2.15 
PROCESS_MODE 
24 
1.2.16 
NEW_EVENT 
25 
1.2.17 
DEMOD_GAIN 
26 
1.2.18 
REPORT_FIELD 
26 
1.2.19 
BER_REPORT 
27 
1.2.20 
ANALOG_TONE 
27 
1.2.21 
CALL_START 
28 
1.2.22 
CALL_STOP 
30 
1.2.23 
CONNECT 
30 
1.2.24 
DISCONNECT 
30 
1.2.25 
DPMR_ACK 
31 
1.2.26 
SYSTEM_INFO 
31 
1.2.27 
ANALOG_SUBAUDIO 
32 
1.2.28 
CALL_MATCH 
41 
1.2.29 
ADDRESSING_MODE 
41 
1.2.30 
GROUP_ID 
42 
1.2.31 
SCRAMBLER_SEED 
43 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
4
1.2.32 
MOD_GAIN 
43 
1.2.33 
CODEC_SELECT 
44 
1.2.34 
SET_I2C_ADDRESS 
44 
1.2.35 
SYNC_MISS_COUNT 
44 
1.2.36 
Q_PRO_STR 
45 
1.2.37 
Q_HW_VER 
45 
1.2.38 
Q_SW_VER 
45 
1.2.39 
Q_CID_SN 
46 
1.2.40 
DMR_GROUP_ID 
46 
1.2.41 
DC_OFFSET 
47 
1.2.42 
ANALOG_CONFIG 
48 
1.2.43 
CTC_PARAM 
50 
1.2.44 
VOCOER_IO_SET 
52 
1.2.45 
MODOUT_CONFIG 
53 
1.2.46 
IQCOMP_COEF 
53 
1.2.47 
DIGC_DATA_FRAME 
55 
1.2.48 
DPMR_PREAMBLE_LENGTH 
61 
1.2.49 
DPMR_CALL_OPTION 
61 
1.2.50 
DPMR_END_UE 
62 
1.2.51 
DIGC_FS1 
63 
1.2.52 
DIGC_CALLED_ID_BIN 
63 
1.2.53 
DIGC_OWN_ID_BIN 
63 
1.2.54 
DPMR_CALLED_ID_BCD 
64 
1.2.55 
DPMR_OWN_ID_BCD 
64 
1.2.56 
DPMR_M_V_F_E 
64 
1.2.57 
DPMR_PROTOCOL_OPTION 
65 
1.2.58 
DPMR_SLD 
65 
1.2.59 
DPMR_HT_CI_PM 
66 
1.2.60 
DPMR_CI 
71 
1.2.61 
DPMR_CC 
71 
1.2.62 
DPMR_SEND_SF 
72 
1.2.63 
DPMR_SEND_HEADER 
72 
1.2.64 
DPMR_SEND_END 
72 
1.2.65 
DPMR_SEND_AD 
72 
1.2.66 
DIGI_MIC_GAIN 
73 
1.2.67 
DIGI_SPEAKER_GAIN 
73 
1.2.68 
I2C_OPERATION 
73 
1.2.69 
MISC_GAIN 
74 
1.2.70 
SQ_LEVEL 
75 
1.2.71 
SPI_OPERATION 
78 
1.2.72 
DMR_SLC 
78 
1.2.73 
DMR_CALL_SLOT 
79 
1.2.74 
EQULIZER_FILTER 
79 
1.2.75 
DMR_FLC 
80 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
5
1.2.76 
DMR_CC 
81 
1.2.77 
DMR_CALL_START 
81 
1.2.78 
DMR_CALL_OPTION 
82 
1.2.79 
DMR_OFFSET 
83 
1.2.80 
DMR_SLOT_TYPE 
84 
1.2.81 
DMR_EMB 
84 
1.2.82 
DMR_CALLED_ID_BCD 
85 
1.2.83 
DMR_OWN_ID_BCD 
85 
1.2.84 
DMR_SLOT_FOUND 
85 
2 
Application Guides 
87 
2.1 
Code Downloading 
87 
2.1.1 
Boot loader Downloading 
87 
2.1.2 
Application Downloading 
87 
2.2 
DPMR Call Processing 
87 
2.2.1 
Easy Mode 
88 
2.2.2 
DPMR Layer 2 Mode 
90 
2.3 
DMR Call Processing 
92 
2.3.1 
DMR Easy Mode 
92 
2.3.2 
DMR Layer 2 Mode 
92 
2.3.3 
DMR MS Call Flow 
93 
2.3.4 
Base Station Activation 
94 
2.3.5 
Listen Before Transmitting 
94 
2.4 
Typical Call Sessions with CT3258 in DPMR Mode 
96 
2.4.1 
Digital Voice Call 
96 
2.4.2 
Voice Call with Slow Data 
97 
2.4.3 
Voice Call Recording 
97 
2.4.4 
Voice Call Play Back 
98 
2.4.5 
Data Call with Type 1 or Type 2 Data 
99 
2.4.6 
Voice Call with Appended Data 
99 
2.4.7 
Data Call Type 3 (for future release) 
100 
2.4.8 
Short Appended Data (TS 102 658 Only) 
102 
2.4.9 
Analog Voice Call in DPMR Mode 
102 
2.4.10 
Handling of Maintenance Message (TS 102 658 Only) 
103 
2.4.11 
Automatic Analog and DPMR Call Detection 
103 
2.4.12 
Audio Muting for Un-matched Calls 
104 
2.5 
Typical Call Sessions with CT3258 in DMR Mode 
104 
2.5.1 
DMR Voice Call in DMR Easy Mode 
104 
2.5.2 
DMR Voice Call in DMR Layer 2 Mode 
107 
2.5.3 
Analog Voice Call in DMR Mode 
110 
2.6 
Gain Calibration 
111 
2.7 
DC and IQ Calibration 
112 
2.8 
Error Handling 
118 
2.9 
DPMR Standard User Interface 
118 
2.9.1 
Message Used for Standard User Interface 
119 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
6
2.10 
DMR Number and Dialing Plan 
121 
2.10.1 
Message Used for DMR Dialing Plan 
122 
2.11 
Power Saving Mode 
123 
2.12 
Codec Selection 
124 
2.13 
Codec Configurations 
124 
2.14 
Debug Mode 
125 
2.14.1 
Setting Up Two Point Modulation 
125 
2.14.2 
BER Test 
125 
2.14.3 
Loop Back 
125 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
7
1 Packet Interface Descriptions 
Packet interface is defined above the physical interface (HPI, Serial Port) for communications 
between CT3258 and the host MCU. The packet format is identical regardless of physical 
interfaces.  
 
As HPI in CT3258 is preconfigured to use 16 bit format, the total number of bytes in a packet 
should be even. If the total number of byte is odd, a zero is appended at the end. This appended 
zero will not be counted in the LENGTH field. 
1.1 Packet Format 
The packet format is as shown in the table below. A packet consists of a packet header and number 
of packet fields and optional parity bytes. A packet header starts with 3 bytes of START_BYTES.  
The next two bytes contain the packet LENGTH and the next byte contains the TYPE. Each 
packet contains one or more fields which are shown as FIELD (0) through FILELD (N-1). 
Optionally, at the end of the packet, there are two parity bytes. 
 
Packet Header 
Field 
Parity 
START_BYTES 
LENGTH TYPE
FIELD(0)
...
FIELD(N-1)
FBYTE PARITY_BYTE
3 byte 
2 byte 
1 byte
Variable 
 
Variable 
1 byte 
1 byte 
Table 1-1 General Packet Format 
 
Packet details are described in the sections below. 
1.1.1 START_BYTES 
The three bytes of START_BYTES always have fixed values of 0x84, 0xA9, 0x61. 
1.1.2 LENGTH 
The PACKET LENGTH occupies two bytes of the packet. The MS byte of the packet length is the 
fourth byte of the packet and the LS byte of the packet length is the fifth byte of the packet. The 
PACKET LENGTH is the sum of each FIELD. Note that PACKET LENGTH excludes the first 6 
bytes taken up by the Packet Header. If parity check is enabled, the length field includes the parity 
byte as well. 
 
As HPI in CT3258 is preconfigured to use 16 bit format, the total number of bytes in a packet 
should be even. If the total number of byte is odd, a zero is appended at the end. This appended 
zero will not be counted in the LENGTH field. 
1.1.3 TYPE 
TYPE field specifies the destination, read/write property and the types of the packet. It includes 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
8
multiple fields, described in the table below: 
 
Bit 
Position 
Field 
Descriptions 
7 
AMBE 
bypass 
External Vocoder message bypass 
0: CT3258 Control 
1: AMBE control 
6 
Codec bypass 
Codec message bypass 
0: CT3258 Control 
1: Codec control, any bytes after packet type are send to codec 
directly 
5 
Read/Write 
Read Write Control 
0: Write. The MCU write fields to CT3258 
1: Read. CT3258 report fields to the MCU. Not all parameters are 
readable. 
4 
Near/Far 
Near end / Far end control 
0: Near end 
1: Far End 
3-0 
Packet Type 
See Table Below 
Table 1-2 Fields in TYPE Byte 
 
Internally, the call related information is stored in registers in CT3258. External MCU can write to 
and read from these registers through packet interface. The write/read control is through bit 5 of 
TYPE field. Not all registers are readable. Column 6 of Table 1-5 describes whether a register is 
readable or not. 
 
Some fields, such as Own ID, Called ID, have two sets of internal registers, for far end and near 
end of calls. When writing a packet field, the content is always stored in the near end registers. 
When reading field information, the MCU can request the near end information or the far end 
information. The near end information is the information that is to be sent or already sent to the far 
end. The far end information is the information that is received from the far end. The near/far end 
control is through bit 4 of the TYPE byte. 
 
For example, station A has an Own ID 1234567, station B has an Own ID of 1234563. The user 
(MCU) can set the Own ID for the two stations with field DPMR_OWN_ID_BCD, and with write 
flag. The user can then read back the Own ID of each station with read flag, and near end flag at 
the two stations. After a call is made from A to B, the user can read the Own ID of station A by 
issuing read command to station B with far end flag. Column 6 of Table 1-5 also describes 
whether far end register is available for reading. 
 
The details of Packet Type are described in Table 1-3 below. 
 
 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
9
Type 
Value 
Packet 
Name 
Descriptions 
0 
Control 
Packets 
Used to set up chip operation mode, configure hardware, set up or end a 
call. When a control packet is received, the chip returns a control packet 
with response fields that contain response data or indication of errors in 
the control packet. 
3 
DPMR 
Packet 
Used for DPMR protocol specific information. User can use these 
messages to change the elements of DPMR protocol. 
4 
Program 
packet 
Used for host MCU to program CT3258.  
5 
DMR 
Used for DMR protocol specific information. User can use these messages 
to change the elements of DMR protocol. 
Others 
Reserved
Reserved 
Table 1-3 Packet Types 
 
Note that the boot loader for DPMR mode and DMR mode is different. Depending on the boot 
loader types, CT3258 enters DPMR mode or DMR mode. In DPMR mode, commands for DMR 
only (type 5) are not recognized. In DMR mode, command for DPMR only (type 3) are not 
recognized. 
 
Also note that for program packet only (type 4), the packet header and parity bytes can be omitted. 
In that case, the boot loader searches for a match of the field and command code. 
1.1.4 Packet Fields 
The packet fields contain useful packet information. Various different packet fields each with their 
own format are defined in the next section, however, the general format of a field is shown in the 
table below. 
 
A field consists of a field identifier followed by field data. The length of field data is dependent 
upon the field identifier. Many fields have fixed lengths. Some fields are variable in length; and in 
such cases the length of the field data is embedded inside field data explicitly or implicitly. 
 
Field Identifier 
Field Data 
1 byte 
L(n)-1 bytes 
Table 1-4 General Field Format 
1.1.5 Parity Field 
The parity field is a 2-byte field at the end of a packet. The first byte of the parity field is the parity 
field identifier and is always equal to 0x2f. The second byte of the parity field is the parity byte. It 
is obtained by “Exclusive-oring” every byte in the packet, except for the START_BYTES and the 
parity byte (last byte), together. CT3258 checks the parity byte for all received packets, informs 
the MCU of any parity error, and discards any packet that has an incorrect parity byte. When 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
10
parity check fails, the receiver replies with a packet (with field 0x17) indicating parity failure. 
Parity check is disabled at reset. It can be enabled when CT3258 receives a control packet with 
PARITY_ENABLE field. 
1.1.6 Time Out 
If a valid message is received, CT3258 responds to MCU in 40 milliseconds (except some especial 
commands in the table ). If a response packet is not received within 40 milliseconds, the MCU can 
consider the message lost and resend the packet if necessary.  
When a response packet is received, the MCU or CT3258 does not send an ACK to the response 
packet. 
 
Commands 
Response time  
CHAN_D 
80ms 
VOCOER_SEL 
1-3s 
CODEC_SELECT 
1 s 
DIGC_DATA_FRAME 
80ms. 
The response time of the first data is header frame(80ms) 
+ Preamble + Silence 
ACK_MESSAGE 
The response time of receiving 17 0A after finishing 
sending is about 400ms. We have to wait the 17 0A to do 
the subsequent operation. 
1.2 Field Formats 
A packet must contain one or more fields. The field formats are different for different types of 
packets. Each packet requires a response packet.  
 
Control packets can be used to configure the chip prior to operation and also to query for 
information from the chip. The response packet for must fields just echoes back the control field 
identifier followed by a 0x00 byte to indicate the control field was received successfully. If 
multiple fields are present in the packets, the response packet only needs to echo the last field of 
the packet. 
 
DPMR / DMR packets contain the call information. They can be originated either from host or 
from CT3258. The response packets to DPMR / DMR packet echoes back the control field 
identifier followed by a 0x00 byte to indicate the field was received successfully. If multiple fields 
are present in the packets, the response packet only needs to echo the last field of the packet. 
 
The Program Packet is used by the host to down load application program to CT3258. The 
response packet to Program Packet echoes back the control field identifier followed by a 0x00 
byte to indicate the field was received successfully. 
 
Either the MCU or CT3258 can initiate a packet exchange. The packet can be used to write 
information to the other end (CT3258 or MCU), or it can be used to request information from the 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
11
other end. The Read/Write control is by bit 5 of the TYPE byte. 
 
When requesting field information, the MCU can request near the end information or the far end 
information. The near end information is the information that is to be sent or already sent to the far 
end. The far end information is the information that is received from the far end. The near/far end 
control is through bit 4 of the TYPE byte. 
 
The table below summarizes various fields used in CT3258. 
 
Field Name 
Field 
Identifie
r 
Pac
ket 
Typ
e 
Contro
l Field 
Length 
(Bytes)
Respon
se Field 
Length 
(Bytes)
Note
Descriptions 
CHAN_D 
0x01 
0 
Varies
2 
YP 
Encoded voice data 
VOCODER_CMODE 
0x02 
0 
2 
2 
N 
Vocoder mode flags for current 
vocoder 
AFC_CONFIG 
0x05 
0 
3 
2 
YR 
 
COMPANDER_CONFI
G 
0x06 
0 
8 
2 
N 
Compander Configuration 
VOCODE_TONE 
0x08 
0 
Varies
2 
Y 
Force current encoder/decoder 
to  generate tone frames 
ANALOG_FEATURE 
0x0A 
0 
3 
2 
N 
Analog Feature configuration 
VOCOER_SEL 
0x10 
0 
2 
2 
N 
Vocoder Selection 
VOCODER_INI 
0x12 
0 
2 
2 
N 
Vocoder initialization 
CHIP_RESET 
0x14 
0 
1 
2 
N 
Chip reset 
CHIP_LOWPWR 
0x15 
0 
2 
2 
N 
Set chip to low power mode 
PARITY_ENABLE 
0x16 
0 
2 
2 
N 
Enable parity check 
ACK_MESSAGE 
0x17 
0 
None 
2 
N 
Message error report 
WORK_MODE 
0x18 
0 
4 
2 
Y 
Set up CT3258 work mode 
CARRIER_READY 
0x19 
0 
2 
2 
N 
Carrier Ready Message 
PROCESS_MODE 
0x1A 
0 
2 
2 
N 
Process Mode 
NEW_EVENT 
0x1B 
0 
None 
2 
YX 
New event indication 
DEMOD_GAIN 
0x1C 
0 
3  
2  
Y 
Demodulator Gain 
REPORT_FIELD 
0x1D 
0 
2 
2 
NX 
Fields to report when receiving 
calls. 
BER_REPORT 
0x1E 
0 
2 
10 
Y 
Bit error rate test report 
ANALOG_TONE 
0x1F 
0 
18 
2 
N 
Generate Local Tone 
CALL_START 
0x20 
0 
2 
2 
N 
Start call send 
CALL_STOP 
0x21 
0 
1 
2 
N 
Stop call send 
CONNECT 
0x22 
0 
2 
2 
NP 
Send connection 
DISCONNECT 
0x23 
0 
2 
2 
NP 
Send disconnection 
DPMR_ACK 
0x24 
0 
2 
2 
NP 
Send ack 
SYSTEM_INFO 
0x25 
0 
2 
2 
NP 
Send 
system 
or 
status 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
12
information 
ANALOG_SUBAUDI
O 
0x26 
   
0 
Varies
2 
N 
analog subaudio 
CALL_MATCH 
0x27 
0 
None 
2 
N 
Call match report 
ADDRESSING_MODE
0x28 
3 
2 
2 
NP 
Dialing mask length 
GROUP_ID 
0x29 
3 
5 
2 
YP 
Group ID number 
SCRAMBLER_SEED 
0x2A 
0 
Varies
2 
NP 
Scrambler seed 
MOD_GAIN 
0x2C 
0 
3  
2  
N 
Modulator Gain 
CODEC_SELECT 
0x2D 
0 
2 
2 
N 
Codec Selection 
SET_I2C_ADDRESS 
0x2E 
0 
2 
2 
N 
Set the I2C address for the 
codec 
SYNC_MISS_CNT 
0x2F 
0 
2 
2 
N 
Set the number of Sync miss 
before reporting 
Q_PRO_STR 
0x30 
0 
1 
Varies 
Y 
Query for product code 
Q_HW_VER 
0x31 
0 
1 
Varies 
Y 
Query for hardware version 
Q_SW_VER 
0x32 
0 
1 
Varies 
Y 
Query for software version 
Q_CID_SN 
0x33 
0 
1 
9 
Y 
Query for customer ID 
DMR_GROUP_ID 
0x36 
5 
6 
2 
YD 
Group ID number 
DC_OFFSET 
0x39 
0 
13 
2 
N 
DC Offset 
ANALOG_CONFIG 
0x3c 
0 
12 
2 
N 
Analog Configuration 
VOCODER_IO_SET 
0x3e 
0 
2 
2 
NP 
Vocoder IO settings 
CTC_PARAM 
0x3d 
0 
23 
2 
N 
CTC detection parameters 
MODOUT_CONFIG 
0x41 
0 
6 
2 
N 
Two point modulation delay 
IQCOMP_COEF 
0x42 
0 
10 
2 
YR 
IQ compensation configuration
DIGC_DATA_FRAME 
0x43 
0,3,
5 
Varies
2 
YFX
Data frames 
DPMR_PREAMBLE_L
ENGTH 
0x46 
0,3
3 
N 
N 
Preamble and silence length 
DPMR_CALL_OPTIO
N 
0x47 
3 
6 
2 
N 
DPMR Call Option 
DPMR_END_UE 
0x4B 
3 
4 
2 
YF 
17-bit un-encoded END 
DIGC_FS1 
0x4C 
3 
7 
2 
YF 
48-bit of FS1 
DIGC_CALLED_ID 
_BIN 
0x50 
3, 5
4 
2 
YF 
24-bit called ID in binary 
DIGC_OWN_ID_BIN 
0x51 
3, 5
4 
2 
YF 
24-bit own ID in binary 
DPMR_CALLED_ID 
_BCD 
0x52 
 
3 
5 
2 
YFP
7 digit called ID in BCD 
DPMR_OWN_ID 
_BCD 
0x53 
3 
5 
2 
YFP
7 digit own ID in BCD 
DPMR_M_V_F_E 
0x54 
3 
2 
2 
YFP
3-bit communication mode and 
4-bit communication format 
DPMR_PROTOCOL_O
PTION 
0x55 
3 
2 
2 
NP 
DPMR protocol option 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
13
DPMR_SLD 
0x56 
3 
4 
2 
YFP
18-bit slow data 
DPMR_HT_CI_PM 
0x57 
3 
3 
2 
YFP
4-bit header type and 11-bit 
call information 
DPMR_CI 
0x5A 
3 
3 
2 
FP 
11-bit call information 
DPMR_CC 
0x5C 
3 
4 
2 
YFP
24-bit of color code (Di-bit) 
DPMR_SEND_SF 
0x5F 
3 
1 
2 
NP 
Send super frame command. 
Upon receiving this command, 
CT3258 assemble a super 
frame and send to the far end 
DPMR_SEND_HEAD
ER 
0x60 
3 
1 
2 
NP 
Send header frame command. 
Upon receiving this command, 
CT3258 assemble a header 
frame and send to the far end 
DPMR_SEND_END 
0x61 
3 
1 
2 
NP 
Send end frame command. 
Upon receiving this command, 
CT3258 assemble a end frame 
and send to the far end 
DPMR_SEND_AD 
0x62 
3 
1 
2 
NP 
Send appended data 
DIGI_MIC_GAIN 
0x68 
0 
3  
2  
N 
Digital Microphone Gain 
DIGI_SPEAKER_GAI
N 
0x69 
0 
3  
2  
N 
Digital Speaker Gain 
I2C_OPERATION 
0x6A 
0 
Varies
5 
Y 
I2C Read and Write 
MISC_GAIN 
0x6B 
0 
13 
2 
N 
Misc. Gains 
SQ_LEVEL 
0x6C 
0 
13 
2 
YR 
RSSI and OOBE levels 
SPI_OPERATION 
0x6D 
0 
3 
2 
YR 
SPI Write Operation 
DMR_SLC 
0x6E 
5 
5 
2 
ND 
DMR SLC report 
DMR_CALL_SLOT 
0x6F 
5 
2 
2 
ND 
DMR call slot information 
EQUALIZER_FILTER 
0x70 
0 
12 
2 
N 
Set 
coefficients 
for 
audio 
equalizer 
DMR_FLC 
0x76 
5 
4 
2 
YD 
DMR Full LC  
DMR_CC 
0x77 
5 
2 
2 
YD 
DMR Color Code 
DMR_CALL_START 
0x78 
5 
4 
2 
ND 
DMR Call Start 
DMR_CALL_OPTION 
0x79 
5 
6 
2 
ND 
DMR Call option 
DMR_OFFSET 
0x7A 
5 
9 
2 
ND 
DMR Slot Timing Offset 
DMR_SLOT_TYPE 
0x7B 
5 
2 
2 
ND 
DMR slot type 
DMR_EMB 
0x7C 
5 
2 
2 
ND 
DMR EMB field 
DMR_CALLED_ID_B
CD 
0x7D 
5 
5 
2 
YFD
8 digit called ID in BCD 
DMR_OWN_ID_BCD 
0x7E 
5 
5 
2 
YFD
8 digit called ID in BCD 
DMR_SLOT_FOUND 
0x7F 
5 
2 
2 
ND 
DMR_slot found 
Table 1-5 Overview of Packet Fields 
 
In the note field in the above table, Y means the command can be used as both WRITE and READ 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
14
command; N means the command can only be used as a WRITE command. F means the command 
can be used to read both Far End information and Near End information. R means the command is 
used only when paired with SCT3700. D means command can be used for DMR only. P means 
command can be used for DPMR only. X means command is interpreted differently for DMR and 
DPMR. 
 
As most fields are used as commands to CT3258 for controlling and configuration purposes, we 
sometimes call field as command. As a result we use the terms field and command 
in-discriminatively throughout the document. 
 
The detailed descriptions of each filed is described in the following sections. Only field format in 
Write Packet is shown. Read Packets usually only have the field ID byte. 
1.2.1 CHAN_D 
This field can be used to pass encoded voice data between the MCU and CT3258. This command 
is only used in DPMR mode. 
 
Field Identifier 
Data Length 
 Vocoder Configuration field 
1 Byte 
1 Byte 
1 Bytes 
0x01 
The length of the 
data in bytes 
Encoded voice data. 36 bytes per 
80 milliseconds.  
Default: 
36 
 
Table 1-6 CHAN_D Field Format 
1.2.2 VOCODER_CMODE 
This field can be used to change the mode of the vocoder.  
 
Field Identifier 
 Vocoder Configuration field 
1 Byte 
1 Bytes 
0x02 
{ AMBE_COMP, 0, 0, 0, NS, 0, TD, AGC} 
Default: 
0x08 
Table 1-7 VOCODER_CMODE Field Format 
 
The meaning of each bit is given below: 
 
Bit Name Descriptions 
Default
AMBE_
COMP 
AMBE 
vocoder 
compatibility bit 
0 
NS 
Noise Suppression Enable
0: disable 
1 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
15
1: enable 
Reserved 
Reserved 
0 
TD 
Tone Detection Enable 
0: disable 
1: enable 
0 
AGC 
AGC Enable 
0: disable 
1: enable 
0 
Table 1-8 VOCODER_CMODE Field Options 
1.2.3 AFC_CONFIG 
This command is used to configure AFC (automatic frequency control), when used with SCT3700. 
 
If the receiver carrier frequency is not matched to the transmitter carrier frequency, the 
performance degrade.  
 
The use the AFC, the user first use this command to read the frequency offset between the 
transmitter and the receiver. To compensate for the frequency offset, the user has two options: 
 
1. Change SCT3700 receiver LO, using SCT3700 frequency configuration command. 
2. Change the internal mixer inside CT3258, using this command.  
 
The AFC_CONFIG write command has the following format: 
 
Field Identifier 
 Internal frequency offset 
1 Byte 
1 Bytes 
0x05 
Internal frequency offset applied at the CT3258 mixer. The unit is Hz 
Default: 
0 
Table 1-9 AFC_CONFIG Field Format 
 
AFC_CONFIG command is also used to read the frequency offset between the receiver and the 
transmitter.  
 
To read the frequency offset, AFC_CONFIG command should be sent with “Read/Write” bit in 
the TYPE field set to 1. The AFC_CONFIG command used in “read” mode has the following 
format: 
 
Field Identifier 
DC Time Constant 
1 Byte 
1 Byte 
0x05 
Time constant for averaging AFC frequency offset  
Default 
3 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
16
Time constant of 0 corresponds to average time of 31.25 ms, which is the time it takes to reach 
within 10% of the steady state energy value. If the constant is n, the average time is given by the 
following formula: 
 
T = 31.25 * 2^n. 
 
The Response to the read AFC_CONFIG command has the following format: 
 
Field Identifier 
Frequency offset 
Reserved 
1 Byte 
1 Byte 
1 Bytes  
0x05 
Frequency 
offset 
between 
the 
transmitter 
and the 
receiver, in Hz 
Reserved 
Default 
- 
- 
1.2.4 COMPANDER_CONFIG 
 
This command is used to configure the compander in analog call mode. The configurable 
parameters include compander reference level for the transmitter and the receiver, the energy 
estimation timing constant, and the compander gain update interval. 
 
 
The compander energy level is calculated as the running average of the absolute values of received 
audio signal, given by the equation below: 
 
E(n) = (1-alpha) * E(n-1) + alpha * |x(n)|, 
 
where |x(n)| is the absolute value of the received audio signal, alpha is the time constant. The 
smaller is the alpha, the larger is the time constant. Roughly, T = 4 / alpha, where T is the time it 
takes to reach within 10% of the steady state energy value. For example, with the default alpha = 
68, the time constant is T = 4 / 68 = 60 ms. 
 
The TX and RX compander reference levels are the signal levels that the input signal are 
compared against. At the TX side, if the input signal energy level is greater than the TX 
compander reference level, the input signal are reduced; if it is less than the TX compander 
reference level, it is enlarged. At the RX side, if the input signal energy level is greater than the 
RX compander reference level, the input signal are enlarged; if it is less than the RX compander 
reference level, it is reduced. 
 
The compander gain update interval is the interval that the compander gains are re-calculated. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
17
Within the interval, the compander gain is unchanged. The compander gain update interval is in 
terms of 24 kHz samples. 
 
 
Field 
Identifier 
Compander 
Update 
interval 
Compander 
TX reference
Comander 
RX reference
Compander 
Energy 
Constant 
1 Byte 
1 Byte 
2 Bytes  
2 Bytes 
2 Bytes 
0x06 
Compander 
update 
interveral 
in 
terms of 24 
samples 
Compander 
TX reference, 
0-32768 
Compander 
RX reference, 
0-32768 
Compander 
Energy update 
constant, 
0-16384 
Default 
60 
2048 
2048 
68 
 
Table 1-10 COMPANDER_CONFIG Field Format 
 
1.2.5 VOCODE_TONE 
This field is used to force the encoder to transmit a tone frame. The frequency (or frequencies) and 
amplitude of the tone are specified by this field. It is also used to report the detected DTMF tone 
or single tone to the MCU. 
 
Field 
Identifier 
Tone 
Configuration 
Tone Data 
Amplitude Data 
16 bit Frequency 
1 Byte 
1 Byte 
1 Byte 
1 Byte 
2 Bytes (Optional) 
0x08 
See Table 1-10 
for details 
See Table 1-12 
for details 
Amplitude 
scale 
in dB 
+3dB to -90 dB 
Single 
tone 
Frequency in 16 bit 
decimal 
Default 
0 
0x80 
-10 dB (0xF6) 
0 
Table 1-11 VOCODE_TONE Field Format 
 
The details of Tone Configuration byte is as follows: 
 
Bit Position Descriptions 
Default 
Bit 7-3 
Reserved 
0 
2 
Optional 16 bit frequency field flag 
0: No 16 bit frequency field 
1: 16 bit frequency field present 
0 
1 
Tone Direction 
0: Send or detect near end Vocoder tone 
1: Send or detect far end Vocoder tone 
0 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
18
0 
Tone on / off flag 
0: Tone Off 
1: Tone On 
0 
Table 1-12 Tone Configuration Details 
 
DTMF Tone Data Tone Type 
Frequency 1 (Hz) 
Frequency 2 (Hz) 
0-4 
Invalid Tone 
NA 
NA 
0x05-0x7A 
Single Tone 
Tone Data * 31.25 Hz
NA 
0x7B-0x7F 
Invalid tone 
NA 
NA 
0x80 
DTMF “0” 
1336 
941 
0x81 
DTMF “1” 
1209 
697 
0x82 
DTMF “2” 
1336 
697 
0x83 
DTMF “3” 
1477 
697 
0x84 
DTMF “4” 
1209 
770 
0x85 
DTMF “5” 
1336 
770 
0x86 
DTMF “6” 
1477 
770 
0x87 
DTMF “7” 
1209 
852 
0x88 
DTMF “8” 
1336 
852 
0x89 
DTMF “9” 
1477 
852 
0x8a 
DTMF “A” 
1633 
697 
0x8b 
DTMF “B” 
1633 
770 
0x8c 
DTMF “C” 
1633 
852 
0x8d 
DTMF “D” 
1633 
951 
0x8e 
DTMF “*” 
1209 
941 
0x8f 
DTMF “#” 
1477 
941 
0x90 
KNOX “0” 
1162 
820 
0x91 
KNOX “1” 
1052 
606 
0x92 
KNOX “2” 
1162 
606 
0x93 
KNOX “3” 
1279 
606 
0x94 
KNOX “4” 
1052 
672 
0x95 
KNOX “5” 
1162 
672 
0x96 
KNOX “6” 
1279 
672 
0x97 
KNOX “7” 
1052 
743 
0x98 
KNOX “8” 
1162 
743 
0x99 
KNOX “9” 
1279 
743 
0x9a 
KNOX “A” 
1430 
606 
0x9b 
KNOX “B” 
1430 
672 
0x9c 
KNOX “C” 
1430 
743 
0x9d 
KNOX “D” 
1430 
820 
0x9e 
KNOX “*” 
1052 
820 
0x9f 
KNOX “#” 
1279 
820 
0xa0 
Dial Tone 
440 
350 
0xa1 
Ring tone 
480 
440 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
19
0xa2 
Busy Tone 
620 
480 
0xa3 
Call Progress Tone
490 
350 
0xa4-0xff 
Inactive 
NA 
NA 
Table 1-13 VOCODE_TONE Field Options 
 
Note that the bytes for 16 bit Frequency is optional. It is present only if bit 2 of Tone 
Configuration Byte is 1. 
 
1.2.6 ANALOG_FEATURE 
This field configures for special feature. Note that these special feature can only be used when the 
analog vocoder (ID = 16) is loaded. 
 
Field Identifier 
ANALOG_FEATURE 
1 Byte 
 
2 Bytes 
0x010 
Bit 0: DTMF enable flag 
0: DTMF detection is disabled 
1: DTMF detection is enabled 
Bit 1: DTMF detection position 
0: DTMF detection is done before the 
de-emphasis filter 
1: DTMF detection is done after the 
de-emphasis filter 
Bit 2: MSK enable flag 
0: MSK transmission and detection 
disabled 
1: MSK transmission and detection is 
enabled. 
Bit 3: Compander enable flag 
0: Compander is disabled 
1: Compander is enabled. 
Bit 4-15: reserved. 
Default 
3 
Table 1-14  ANALOG_FEATURE Field Format 
 
1.2.7 VOCOER_SEL 
This field forces vocoder type.  
 
CT3258 supports AMBE+2 vocoder from DVSI. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
20
Field Identifier 
Vocoder Type 
1 Byte 
1 Byte 
0x010 
4: AMBE+2 
16: Analog calls  
Others, reserved 
Default 
4 
Table 1-15  VOCODER_SEL Field Format 
 
1.2.8 VOCODER_INI 
This command initializes the vocoder. 
 
Field Identifier
Initialization type
1 Byte 
1 Byte 
0x012 
N/A 
Default 
0 
Table 1-16 VOCODER_INI Field Format 
1.2.9 CHIP_RESET 
This command resets CT3258. This command has the effect as NMI signal (non-maskable 
interrupt), which restarting the firmware in CT3258 without reloading the firmware. 
Field Identifier
1 Byte 
0x14 
Table 1-17 CHIP_RESET Field Format 
1.2.10 CHIP_LOWPWR 
This command puts CT3258 in low power mode. 
 
Field Identifier 
Low Power Mode 
1 Byte 
1 byte 
0x015 
Bit 7:6, Reserved 
Bit 5: Power down external vocoder 
Bit 4: Power down external codec 
Bit 3:0: Power mode of CT3258 
0: Normal 
1: Stop TX and RX processing 
2: Reserved 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
21
Table 1-18 CHIP_LOWPWR Field Format 
1.2.11 PARITY_ENABLE 
This command enables parity checks on all packets: 
 
Field Identifier
Parity Enable/Disable 
1 Byte 
1 Byte 
0x016 
0: Disable parity checks 
1: Enable parity checks
Default 
0 
Table 1-19 PARITY_ENABLE Field Format 
 
Note that unlike other fields, PARITY_ENABLE field can only be the only field in a packet.  
1.2.12 ACK_MESSAGE 
This is a response packet to a received packet, when packet is not received correctly, and the 
packet field is not recognizable or unreliable.  
 
Note that when received field is recognizable reliably even though there is error in the packet, 
CT3258 respond with the command field instead of ACK_MESSAGE field. 
 
Note that 0x17 0x0A does not indicate an error condition. This is sent when CT3258 has 
completely sent the message to be sent to the far end. 
3: Power down certain peripheral of CT3258 including serial port, DMA and 
timers. 
4: CT3258 enters IDLE mode 
5: CT3258 enters Sleep mode 
6: CT3258 enters Halt mode 
 
Default 
0 
Field Identifier 
Failure Code 
1 Byte 
1 Byte 
0x017 
0: No error   
1: Response to system reset. CT3258 is ready to receive command from the 
host. 
2: Field length exceeds maximum allowed  
3: Parity error  
4: Unknown command error  
5: Packet length does not match with field Length  
6: Error in processing field  
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
22
Table 1-20 PACKET_FAILURE Field Format 
1.2.13 WORK_MODE 
This command set the work mode for CT3258. 
 
Table 1-21 WORK MODE Field Format 
 
Bit Position Descriptions 
7 
Two Point Modulation Disable Flag 
0: Enable two point modulation in TX mode
1: Disable two point modulation in TX mode 
6 
Special SCT3700 calibration loop enable 
0: Normal mode 
1: Enable the special SCT3700 calibration 
loop 
5-4 
Reserved 
3-0 
Work Mode 
7: I2C write error  
8: SLD request time out error  
9: TCH request time out error  
10. Message to far end completion indication 
11. Error in processing called ID or own ID 
12. Chip not activated 
13. Unsupported feature 
14. Function not loaded 
15. Odd byte error 
 
Others: reserved 
Default 
0 
Field 
Identifier 
Work 
Mode 
Modem Loop Mode 
Audio Loop Back 
Debug Mode 
1 Byte 
1 Byte 
1/2 Byte [7:4] 
1/2 Byte [3:0] 
1 Byte 
0x018 
See Table 
1-19 
for 
details. 
0: No Loop 
1: Codec Loop back 
2: 4 FSK Loop back 
3: Packet Loop back 
4: FEC Loop back 
5: Vocoder Loop back
6: Decimator Loop 
back 
Others: reserved 
0: No Loop 
1: Codec Loop back 
2: 
Decimator 
Loop 
back 
3: Vocoder Loop back 
4: FEC Loop back 
5: Packet Loop back 
6: 4 FSK Loop back 
Others: reserved 
See Table 1-20 for 
details 
Default 
0 
0 
0 
0 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
23
0: Idle 
1: RX 
2: TX 
3: Full Duplex 
Table 1-22 Details of Work Mode Byte 
 
Byte Value Descriptions 
0 
No debug 
1 
Mod port send fixed sine wave of 1000 Hz 
2 
Mod port send 4 FSK signal with FS1 pattern 
3 
Reserved 
4 
Reserved 
5 
BER Test mode 
6 
Reserved 
7 
Reserved 
8 
Reserved 
9 
TX sends 1031 Hz test Tone instead Voice from microphone 
10 
TX sends silence instead Voice from microphone 
11 
DMR BER test mode (STD ID 511) 
14 
DPMR/DMR BER test mode (STD IB CALL), see note 1 
Table 1-23 Details of Debug Mode Byte 
 
Note 1: The STD IB CAL pattern changes the STB IB 511 pattern with every 100th bit inverted.  This 
gives this pattern a 1% bit error rate 
 
1.2.14 CARRIER_READY 
This command informs CT3258 that carrier is detected on the RX side. Upon receiving this 
message, CT3258 start to look for preamble and frame SYNCs. This command is also used to 
inform CT3258 whether to mute the audio if the called ID (for DPMR calls) or CTCSS/DCS code 
does match.  
 
If carrier detection (SQ) is to be done by CT3258 (enabled by CALLL_OPTION command), this 
command starts the carrier detection on CT3258. 
 
Field Identifier 
Carrier Ready Indication 
1 Byte 
1 Byte 
0x019 
Bit 7:3, Reserved 
Bit 2: Mute Flag for muting audio if called ID or CTCSS/DCS code does not 
match. 
   0: Un-mute the audio even if the called ID (for DPMR calls) or 
CTCSS/DCS code (for a analog calls) does not match 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
24
   1: Mute the audio if the called ID (for DPMR call) or CTCSS/DCS code 
(for analog calls) does not match, un-mute other wise. 
Bit 1:0, Carrier ready flag 
0: Carrier Lost  
1: Carrier Ready 
2: Carrier Ready, but the phase of the demodulated signal is reversed. 
Others: reserved 
Note： The reverse of demodulated signal polarity does not work in analog 
mode. Please configure the polarity with ANALOG_SUBAUDIO. 
 
Default 
0 
Table 1-24 CARRIER_READY Field Format 
1.2.15 PROCESS_MODE 
This command set the process mode of CT3258. The process mode includes DPMR / DMR 
physical layer only (1), physical layer plus data link layer (2) and physical layer plus data link 
layer plus call control layer (3). This command is also used to enable automatic detection of 
analog or digital calls. 
 
Field Identifier 
Process Mode 
1 Byte 
1 Byte 
0x01A 
2: Layer 2, DPMR / DMR Layer 2 Mode 
3: Layer 3, Easy Mode 
128: Analog Mode 
131: Automatic detection of analog call or DPMR calls (layer 
3) 
Others: Reserved 
Default 
2 
Table 1-25 PROCESS_MOD Field Format 
 
With layer two processing mode, CT3258 is responsible to perform layer one and layer two 
processing of the DPMR / DMR protocol, including the FEC, interleaving and message 
interpretation. 
 
Layer 2 processing complies with ETSI TS 102 490 or TS 102 658 in DPMR mode, and ETSI TS 
102 361 in DMR mode, 
 
With layer three processing mode, in addition to layer two processing, the CT3258 also performs 
call control of the DPMR / DMR processing. ANNEX A Standard User Interface for CSF radio in 
DPMR mode, and ANNEX C DMR Numbering and Dialing plan are implemented in CT3258. At 
the transmitter, CT3258 supports wild character dialing for group and all calls for DPMR and 
DMR, abbreviated dialing and masked dialing for DPMR. At the receiver, when a call is received, 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
25
CT3258 does matching of individual call number and group number and informs the MCU of 
matching results.  
1.2.16 NEW_EVENT 
This message is sent when a new event occurs and requires MCU attention. Note that some of the 
fields different in DPMR and DMR mode.  
 
Field Identifier 
Event 
1 Byte 
1 Byte 
0x01B 
0: No event  
1: DPMR: New Header frame received, with FEC error 
  DMR: Data Sync received with FEC error 
2: DPMR: New End frame received 
3: DPMR: New CCH received 
4: DPMR New Header frame received with no FEC error 
  DMR: Data SYNC received 
5: DPMR: Super Frame received, with no FEC error 
  DMR: Voice SYNC received 
6: DPMR: FS3 received 
7: DPMR: FS4 received 
8: Lost synchronization 
9. DPMR: FS1 found pre-alert 
10. DPMR: FS2 found pre-alert 
11. Reserved 
12. Carrier detected 
13. Carrier lost 
14. Unsupported call received  
15. Wrong vocoder 
16-255 reserved 
Default 
0 
Table 1-26 NEW_EVENT Field Format 
 
If a digital call is received and correctly decoded, CT3258 reports NEW_EVENT 4 OR 5. If a 
digital call is received but has FEC error, CT3258 reports NEW_EVENT 1. These event reports 
can also be disabled with REPORT_FIELD command. 
 
In DPMR mode, if mixed call detection is enabled, and a digital call is received, NEW_EVENT 9 
or 10 will be reported first, before complete FEC checking process, to alert MCU that a digital call 
is received. These events can be used to terminate analog call detection.  
 
If CT3258 is to do carrier detection (SQ), NEW_EVENT 12 and 13 are used to report carrier 
status. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
26
During the course of a digital call, if synchronization pattern is not detected for a period of time 
(configured through command SYNC_MISS_COUNT), CT3258 reports NEW_EVENT 8. 
1.2.17 DEMOD_GAIN 
This message set the demodulation gain for the demodulator. If the value is zero, auto calibration 
is used. 
 
Table 1-27 DEMOD_GAIN Field Format 
1.2.18 REPORT_FIELD 
This message informs CT3258 what field to report when receiving a call. 
 
Field Identifier 
Mask Byte 
1 Byte 
1 Byte 
0x01D 
Mask to indicate the field to report when receiving a new call. Each individual 
bit select one field. Multiple fields can be selected. 
Default 
0x70 
Table 1-28 REPORT_FIELD Field Format 
 
The details of the bits are different depending on DPMR or DMR mode. 
 
Bit Position
Field to report 
7 
NEW_EVENT (FS1 or FS2)
6 
DPMR_M_V_F_E 
5 
DPMR_HT_CI_PM 
4 
DIGC_CALLED_ID_BIN 
3 
DPMR_CALLED_ID_BCD
2 
DIGC_OWN_ID_BIN 
1 
DPMR_OWN_ID_BCD 
0 
DPMR_CC 
Table 1-29 Bit definition for Mask Byte in DPMR Mode 
 
 
Field Identifier 
Event 
1 Byte 
2 Byte 
0x01C 
0: Auto calibration 
Others: linear gain values in Q16.11 (16 bits total, 11 bits fraction, MSB first), 
with 2048 as 0 dB 
 
Default 
0 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
27
Bit Position
Field to report 
7 
NEW_EVENT (FS1 or FS2)
6 
DMR_FLC 
5 
DMR_CSBK 
4-1 
Reserved 
0 
DMR SLOTTYPE OR EMB
Table 1-30 Bit definition for Mask Byte in DMR Mode 
 
1.2.19 BER_REPORT 
This command enquires for the BER test report. The BER includes test success flag, test duration, 
total number of errors, and error rate in ppm (pieces per million). A duration parameter in the 
command control the duration used in ppm calculation  
 
Field Identifier 
BER Duration 
1 Byte 
1 Byte 
0x01E 
BER statistics duration 
0: All errors in the test are used in BER ppm calculation 
1-30, number of seconds used for ppm calculation. Error beyond the duration 
are discarded in BER ppm calculation  
Default 
0 
Table 1-31 BER_REPORT Field Format 
 
The response packet returns the BER results. 
Table 1-32 BER_REPORT response Field Format 
1.2.20 ANALOG_TONE 
This command enables the CT3258 to generate or stop a tone signals to be played out from the 
line out port or the MOD port. The tone signal is a repetition of a two-tone pattern, in the form as 
Tone1-Tone2-Tone1-Tone2….-Tone1-Tone2. Each tone is made up of two frequencies. The 
Field 
Identifier 
 Valid 
Indication 
Test length 
Errors 
Error in PPM 
1 Byte 
1 Byte 
2 Bytes  
4 Bytes 
4 Bytes 
0x01E 
1: BER test 
successful 
0: BER test 
unsuccessful. 
Result is not 
meaningful 
Word (MSB first) to 
indicate the number 
of seconds in BER 
test 
Long 
word 
(MSB 
first) to indicate the 
number 
of 
errors 
found. 
Long word (MSB 
first) to indicate the 
error percentage (in 
ppm) 
Default 
0 
0 
0 
0 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
28
frequencies and amplitudes are programmable. If silence is desired for the second tone, the user 
should set the two frequencies or the two amplitudes of the second tone to zero. 
 
 
Table 1-33 LOCAL_TONE Field Format 
 
 
 
Bit Position
Field to report 
7 
Remote Tone Flag 
0: Local Tone to the line out port
1: Remote Tone to the MOD port
6-0 
Repeat Number 
0: Stop Tone 
127: Infinite 
Others: Repetition Number   
Table 1-34 Definition for TONE_CTRL 
1.2.21 CALL_START 
Call Start command. Upon receiving this command, CT3258 begins to send call to the far end. 
Field 
Identifier 
TONE_CTRL 
Frequency 11
Frequency 12 
Frequency 21 
Frequency 22 
1 Byte 
1 Byte 
2 Bytes  
2 Bytes 
2 Bytes 
2 Bytes 
0x01F 
See 
Table 
1-32 
for 
Details 
First 
frequency 
of 
the first tone, 
in Hz 
If Bit 7 of the 
MSB 
is 
1, 
siren 
is 
generated 
Second 
frequency 
of 
the first tone, in 
Hz 
First frequency 
of the Second 
tone, in Hz 
Second 
frequency 
of 
the 
second 
tone, in Hz 
Default 
0 
NA 
NA 
NA 
NA 
Amplitude11  
Amplitude 12 
Amplitude 21 
Amplitude 22 
Length 1 
Length 2
1 Byte 
1 Byte 
1 Bytes  
1 Bytes 
2 Bytes 
2 Bytes 
Amplitude of 
the first 
frequency of 
the first tone, in 
8 bit linear 
scale with 6 bit 
fractions  
Amplitude 
of 
the 
second 
frequency of the 
first tone, in 8 
bit linear scale 
with 
6 
bit 
fractions 
Amplitude 
of 
the 
first 
frequency of the 
second tone, in 
8 bit linear scale 
with 
6 
bit 
fractions 
Amplitude 
of 
the 
second 
frequency of the 
second tone, in 
8 bit linear scale 
with 
6 
bit 
fractions 
Length of 
the 
first 
tone 
in 
milliseco
nds. 
Length 
of 
the 
second 
tone 
in 
milliseco
nds. 
NA 
NA 
NA 
NA 
NA 
NA 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
29
 
 
Field Identifier 
Call Details 
1 Byte 
1 Byte 
0x20 
DATA[0]={M[2:0], V[1:0], F[1:0], EP} 
Call Mode, Version, Call Format, 
Emergency Call flag 
Default 
0 
Table 1-35 CALL_START Field Format 
 
With CALL_START command, the header type, HT is set to 0x0. 
 
The M, F, and P fields are described in the following tables 
 
M 
Communication Modes 
000 
Voice communication (no user data in SLD field) 
001 
Voice + slow data (user data in SLD field) 
010 
Data communication type 1 (Payload is user data without FEC) 
011 
Data communication type 2 (Payload  is user data with FEC) 
100 
Data communication type 3 (Packet data, ARQ method) 
101 
Voice and appended data (type 2) 
110 
Appended data 
Others Reserved 
Table 1-36 Communication Mode Field Details 
 
V
Version number 
00
DPMR standard traffic
01
Reserved 
10
Reserved 
11
Manufacturer specific
Table 1-37 Version Field Details 
 
F 
Communication Format 
00 Call ALL (Broadcast) 
01 Peer-to-peer communication
10 BS uplink 
11 
BS downlink 
Table 1-38 Communication Format Field Details 
 
EP
Emergency Priority Flag
0 
Normal call 
1 
Emergency call 
Table 1-39 Emergency Priority Flag Field Details 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
30
1.2.22 CALL_STOP 
Call Stop command. Upon receiving this command, CT3258 sends an END frame to the far end 
and then stop the call to the far end. 
 
Field Identifier
1 Byte 
0x21 
Table 1-40 CALL_STOP Field Format 
 
This command is also used to end an analog call. 
1.2.23 CONNECT 
Call Connect command. Upon receiving this command, CT3258 send connection command to the 
far end. It is also used send a call alert to the far end in the case of voice calls. 
 
Field Identifier 
Call Details 
1 Byte 
1 Byte 
0x22 
DATA[0]={M[2:0], V[1:0], F[1:0], EP} 
Call Mode, Version, Call Format, 
Emergency Call flag 
Default 
0 
Table 1-41 CONNECT Field Format 
 
With CONNECT command, the header type, HT is set to 0x01. 
 
The meaning of M, V, F and EP fields are described in Table 1-32 to Table 1-35. 
 
If there is no frame after sending this command, we must wait CT3258 report 17 0A then make the 
subsequent operation (The response time is 150ms+Preamble +Silence+PowerSaveHeader). 
1.2.24 DISCONNECT 
Call Disconnection command. Upon receiving this command, CT3258 sends disconnect command 
to the far end. 
 
Field Identifier 
Call Details 
1 Byte 
1 Byte 
0x23 
DATA[0]={M[2:0], V[1:0], F[1:0], EP} 
Call Mode, Version, Call Format, 
Emergency Call flag 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
31
Default 
0 
Table 1-42 DISCONNECT Field Format 
 
With DISCONNECT command, the header type, HT is set to 0x02. 
 
The meaning of M, V, F and EP fields are described in section CALL_START. 
 
If there is no frame after sending this command, we must wait CT3258 report 17 0A then make the 
subsequent operation (The response time is 300ms+Preamble +Silence +PowerSaveHeader). 
1.2.25 DPMR_ACK 
ACK command: Upon receiving this command, CT3258 send acknowledgment to the far end. 
 
Field Identifier 
Call Details 
1 Byte 
1 Byte 
0x24 
DATA[0]={M[2:0], V[1:0], F[1:0], EP} 
Call Mode, Version, Call Format, 
Emergency Call flag 
Default 
0 
Table 1-43 DPMR_ACK field Format 
 
 
With DPMR_ACK command, the header type, HT is set to 0x03. 
 
The meaning of M, V, F and EP fields are described in section CALL_START. 
 
If there is no frame after sending this command, we must wait CT3258 report 17 0A then make the 
subsequent operation (The response time is 100ms+Preamble +Silence+PowerSaveHeader). 
1.2.26 SYSTEM_INFO 
System Info command, upon receiving this command, CT3258 sends system or status request or 
response to the far end. 
 
Field Identifier 
Call Details 
1 Byte 
1 Byte 
0x25 
DATA[0]={M[2:0], F[3:0], EP} 
Call Mode, Version, Call Format, 
Emergency Call flag 
Default 
0 
Table 1-44 SYSTEM_INFO field Format 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
32
SYSTEM_INFO command does not set header type, HT, field. The header type can be set with 
DPMR_HT_CI_PM or DPMR_HT command before sending SYSTEM_INFO.  
 
The meaning of M, V, F and EP fields are described in in section CALL_START. 
 
If there is no frame after sending this command, we must wait CT3258 report 17 0A then make the 
subsequent operation (The response time is 150ms+Preamble +Silence+PowerSaveHeader). 
1.2.27 ANALOG_SUBAUDIO 
This field contains analog sub_audio message. Upon receiving this message, CT3258 configure 
the sub-audio generation and detection setting of CT3258 in analog mode. It is also used to report 
detection of specific CTCSS/DCS tones and tail detection results. 
 
The number of bytes for this field varies depending on the whether arbitrary CTCSS/DCS 
generation and detection is required. If no arbitrary CTCSS/DCS is required, the field length is 3. 
If arbitrary DCS code is required, the field length is 5. The added two bytes are for the arbitrary 
DCS code in hex form. If arbitrary CTCSS code is required, the field length is 9. Two of the added 
six bytes are for the CTCSS frequencies, another four bytes are for the two coefficients for the 
narrow band filter for that particular frequency. 
 
The CTCSS coefficients are calculated from the arbitrary CTCSS frequency to be detected. The 
formula is: 
 
a1 = round (2048 * sqrt (1.9990 * (1-cos(2*w0)))) 
 
a2 = round (-2047*2^9 * cos (w0)) + 2^20 
 
where w0 is calculated from the desired arbitrary CTCSS frequency, f0, by 
 
w0 = f0/1909.9 
 
For example for CTCSS frequency 67 Hz, the coefficients are calculated as follows: 
 
a1 = round (2048*sqrt (1.9990 * (1-cos (2*67/1909.9)))) = 144 
a2 = round ((-2047*2^9 * cos (67/1909.9))) + 2^20 = 1157 
 
The MCU is responsible to calculate the coefficients and pass them to CT3258. 
 
Field 
Identifier 
Sub-audio 
Configuration / 
Status 
CTCSS/DCS 
number 
Arbitrary 
CTCSS 
frequency or 
DCS code 
Coefficient 
A1 
Coefficient 
a2 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
33
1 Byte 
1 Byte 
1 Byte 
2 Bytes 
2 Bytes 
2 Bytes 
0x26 
See Table 1-44 
for details 
0: No CTCSS 
/DCS 
1-108: 
CTCSS/DCS 
code 
255: Arbitrary 
CTCSS/DCS 
code 
Others: 
reserved 
For 
CTCSS: 
CTCSS 
frequency 
in 
steps of 0.1 Hz 
(MSB first) 
 
For 
DCS, 
0-0x1ff, 
corresponding 
to 
the 
DCS 
code, in HEX 
format , MSB 
first 
Narrow 
band 
filter 
coefficient 
a1 
for 
arbitrary 
CTCSS 
frequency  
Narrow 
band 
filter 
coefficient 
a1 
for 
arbitrary 
CTCSS 
frequency 
Default 
0x40 
0 
NA 
 NA 
NA 
Table 1-45 SUBAUDIO Field Format 
 
Bit Position 
Bit Name 
Descriptions 
7 
CD_SEL 
DCS and CTCSS select 
0: CTCSS 
1: DCS 
6 
EXP_SEL 
Expanded CTCSS / DCS code Select 
0: Standard CTCSS/DCS set (38 for CTCSS, 83 for 
DCS) 
1: Expanded CTCSS DCS Set (51 for CTCSS, 107 
for DCS) 
5 
Polarity 
DCS polarity 
0: Positive DCS polarity 
1: Negative DCS polarity 
4 
Blind 
Blind sub-audio detection enable 
0: No blind sub-audio detection 
1: Blind sub-audio detection enabled. 
3 
Auto Polarity Detection 
DCS Auto polarity detection enable 
0: DCS Auto polarity detection disabled 
1: DCS Audio polarity detection enable 
2-1 
Tail Detection 
Configuration or Report 
In a configuration packet, it is used to enabling tail 
generation and detection: 
00: No Tail detection 
01: 120 degree tail 
10: 180 degree tail for CTCSS. Enable tail detection 
for DCS. 
11: 240 degree tail 
 
In a report packet, it is used to report tail detection 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
34
results: 
00: No Tail found 
01: 120 degree tail found 
10: 180 degree tail found 
11: 240 degree tail found 
 
0 
FOUND 
Sub audio find flag 
0: No CTCSS/DCS found 
1: CTCSS/DCS found 
Table 1-46 Sub-Audio Configuration Details 
 
Serial Number： 
DCS code in Octal format 
DCS code in Hex format 
1 
017 
00F 
2 
023 
013 
3 
025 
015 
4 
026 
016 
5 
031 
019 
6 
032 
01A 
7 
036 
01E 
8 
043 
023 
9 
047 
027 
10 
050 
028 
11 
051 
029 
12 
053 
02B 
13 
054 
02C 
14 
065 
035 
15 
071 
039 
16 
072 
03A 
17 
073 
03B 
18 
074 
03C 
19 
114 
04C 
20 
115 
04D 
21 
116 
04E 
22 
122 
052 
23 
125 
055 
24 
131 
059 
25 
132 
05A 
26 
134 
05C 
27 
143 
063 
28 
145 
065 
29 
152 
06A 
30 
155 
06D 
31 
156 
06E 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
35
32 
162 
072 
33 
165 
075 
34 
172 
07A 
35 
174 
07C 
36 
205 
085 
37 
212 
08A 
38 
223 
093 
39 
225 
095 
40 
226 
096 
41 
243 
0A3 
42 
244 
0A4 
43 
245 
0A5 
44 
246 
0A6 
45 
251 
0A9 
46 
252 
0AA 
47 
255 
0AD 
48 
261 
0B1 
49 
263 
0B3 
50 
265 
0B5 
51 
266 
0B6 
52 
271 
0B9 
53 
274 
0BC 
54 
306 
0C6 
55 
311 
0C9 
56 
315 
0CD 
57 
325 
0D5 
58 
331 
0D9 
59 
332 
0DA 
60 
343 
0E3 
61 
346 
0E6 
62 
351 
0E9 
63 
356 
0EE 
64 
364 
0F4 
65 
365 
0F5 
66 
371 
0F9 
67 
411 
109 
68 
412 
10A 
69 
413 
10B 
70 
423 
113 
71 
431 
119 
72 
432 
11A 
73 
445 
125 
74 
446 
126 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
36
75 
452 
12A 
76 
454 
12C 
77 
455 
12D 
78 
462 
132 
79 
464 
134 
80 
465 
135 
81 
466 
136 
82 
503 
143 
83 
506 
146 
84 
516 
14E 
85 
523 
153 
86 
526 
156 
87 
532 
15A 
88 
546 
166 
89 
565 
175 
90 
606 
186 
91 
612 
18A 
92 
624 
194 
93 
627 
197 
94 
631 
199 
95 
632 
19A 
96 
646 
1A6 
97 
654 
1AC 
98 
662 
1B2 
99 
664 
1B4 
100 
703 
1C3 
101 
712 
1CA 
102 
723 
1D3 
103 
731 
1D9 
104 
732 
1DA 
105 
734 
1DC 
106 
743 
1E3 
107 
754 
1EC 
108 
0 
000 
Table 1-47 DCS Extend Table 
Serial Number： 
DCS code in Octal format 
DCS code in Hex Format 
1 
023 
013 
2 
025 
015 
3 
026 
016 
4 
031 
019 
5 
032 
01A 
6 
043 
023 
7 
047 
027 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
37
8 
051 
029 
9 
054 
02C 
10 
065 
035 
11 
071 
039 
12 
072 
03A 
13 
073 
03B 
14 
074 
03C 
15 
114 
04C 
16 
115 
04D 
17 
116 
04E 
18 
125 
055 
19 
131 
059 
20 
132 
05A 
21 
134 
05C 
22 
143 
063 
23 
152 
06A 
24 
155 
06D 
25 
156 
06E 
26 
162 
072 
27 
165 
075 
28 
172 
07A 
29 
174 
07C 
30 
205 
085 
31 
223 
093 
32 
226 
096 
33 
243 
0A3 
34 
244 
0A4 
35 
245 
0A5 
36 
251 
0A9 
37 
261 
0B1 
38 
263 
0B3 
39 
265 
0B5 
40 
271 
0B9 
41 
306 
0C6 
42 
311 
0C9 
43 
315 
0CD 
44 
331 
0D9 
45 
343 
0E3 
46 
346 
0E6 
47 
351 
0E9 
48 
364 
0F4 
49 
365 
0F5 
50 
371 
0F9 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
38
51 
411 
109 
52 
412 
10A 
53 
413 
10B 
54 
423 
113 
55 
431 
119 
56 
432 
11A 
57 
445 
125 
58 
464 
134 
59 
465 
135 
60 
466 
136 
61 
503 
143 
62 
506 
146 
63 
516 
14E 
64 
532 
15A 
65 
546 
166 
66 
565 
175 
67 
606 
186 
68 
612 
18A 
69 
624 
194 
70 
627 
197 
71 
631 
199 
72 
632 
19A 
73 
654 
1AC 
74 
662 
1B2 
75 
664 
1B4 
76 
703 
1C3 
77 
712 
1CA 
78 
723 
1D3 
79 
731 
1D9 
80 
732 
1DA 
81 
734 
1DC 
82 
743 
1E3 
83 
754 
1EC 
84 
0 
000 
 
Table 1-48 DCS Standard Table 
 
Serial Number： 
CTCSS frequency 
1 
67 
2 
71.9 
3 
74.4 
4 
77 
5 
79.7 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
39
6 
82.5 
7 
85.4 
8 
88.5 
9 
91.5 
10 
94.8 
11 
97.4 
12 
100 
13 
103.5 
14 
107.2 
15 
110.9 
16 
114.8 
17 
118.8 
18 
123 
19 
127.3 
20 
131.8 
21 
136.5 
22 
141.3 
23 
146.2 
24 
151.4 
25 
156.7 
26 
162.2 
27 
167.9 
28 
173.8 
29 
179.9 
30 
186.2 
31 
192.8 
32 
203.5 
33 
210.7 
34 
218.1 
35 
225.7 
36 
233.6 
37 
241.8 
38 
250.3 
39 
134.4 
Table 1-49 CTCSS Standard Table 
 
 
Serial Number： 
ctcss 52 digit decimal 
1 
63 
2 
67 
3 
69.3 
4 
71.9 
5 
74.4 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
40
6 
77 
7 
79.7 
8 
82.5 
9 
85.4 
10 
88.5 
11 
91.5 
12 
94.8 
13 
97.4 
14 
100 
15 
103.5 
16 
107.2 
17 
110.9 
18 
114.8 
19 
118.8 
20 
123 
21 
127.3 
22 
131.8 
23 
136.5 
24 
141.3 
25 
146.2 
26 
151.4 
27 
156.7 
28 
159.8 
29 
162.2 
30 
165.5 
31 
167.9 
32 
171.3 
33 
173.8 
34 
177.3 
35 
179.9 
36 
183.5 
37 
186.2 
38 
189.9 
39 
192.8 
40 
196.6 
41 
199.5 
42 
203.5 
43 
206.5 
44 
210.7 
45 
218.1 
46 
225.7 
47 
229.1 
48 
233.6 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
41
49 
241.8 
50 
250.3 
51 
254.1 
52 
134.4 
Table 1-50 CTCSS Extend Table 
1.2.28 CALL_MATCH 
This field is used in a CT3258 generated report message when a call is received, as a result from a 
CARRIER_READY command from the MCU. It is generated if a DPMR or a DMR call is 
received and that the receiver can start to SYNC with the transmitter. 
 
Field Identifier
Call Details 
1 Byte 
1 Byte 
0x27 
See Table 1-48 for details
Default 
0 
Table 1-51 CALL_MATCH Field Format 
 
Table 1-52 Call Match Details 
1.2.29 ADDRESSING_MODE 
This field is used to configure the addressing mode of CT3258 for DPMR. As described in the 
DPMR spec (TS 102 490 or 658).), with initial addressing mode, the user uses 254 binary ID’s. 
With configured addressing mode, the user can use a dial pad to dial 7 digital numbers. 
 
Bit Position 
Bit Name 
Descriptions 
7-4 
Group ID 
For group calls, the matched group ID 
3 
CC Match 
Color code match status 
0: Color code matched 
1: Color code not matched 
2 
Un-match Reason The reason for call not matching 
0: Valid Called ID not received 
1: Called ID not matched 
Others: reserved 
1 
Group Call 
Group or individual call flag when a call is matched 
0: Individual call 
1: Group call 
0 
Called ID Match 
Flag 
Called ID Match Flag 
0: Called ID matched with receiver Own ID, or one of the 
receiver group ID 
1: Called ID is not matched 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
42
The field format is described below. 
 
Field Identifier
Addressing Mode Details
1 Byte 
1 Byte 
0x28 
See Table 1-50 for details
Default 
0 
Table 1-53 ADDRESSING_MODE Field Format 
 
Bit Position 
Bit Name 
Descriptions 
7-4 
Reserved 
Reserved 
3-1 
Dial mask Length 
0-6: The length of the Dial mask for Configured Addressing mode 
Others: invalid. 
0 
Mode Select 
Address mode select 
0: Initial Addressing mode  
1: Configured Address mode (Standard User Interface) 
Table 1-54 Addressing Mode Details 
 
The number of digital the user is allowed to dial is (7- Dial_Mask_Length). For example, 3 mean 
that 3 numbers are masked. The user is able to dial a maximum of 4 numbers. By default, 
Dial_Mask_Length = 0, meaning no mask is used and the user is allowed to dial all 7 digits. 
1.2.30 GROUP_ID 
The command is for DPMR mode only. A separate command DMR_GROUP_ID is used for DMR 
mode.  
 
Each DPMR terminal can be assigned an individual ID (own ID) and one or several group ID’s. 
When an incoming called ID matched with the receiver’s individual ID or group ID, the receiver 
responds. The GROUP_ID field is used to pass the group ID to CT3258. 
 
This field contains the group ID in 7 BCD codes and one group number. 
 
Field Identifier
 Group ID and group number 
1 Byte 
4 Bytes 
0x29 
DATA[0]= {K1, K2} 
DATA[1]= {K3, K4} 
DATA[2]= {K5, K6} 
DATA[3]= {K7, Group Number},
where group number can be 1-15
Default 
0,0,0,0 
Table 1-55 GROUP_ID Field Format 
 
K1, … , K7 are 0-9 for BCD numbers, or 10 for ‘*’. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
43
 
The command fields support up to 15 group numbers.  
1.2.31 SCRAMBLER_SEED 
This command enables/disables the voice scrambler for encryptions and selects the 32 bit 
scrambler seed.  
 
 
Field Identifier 
Scrambler Type 
Scrambler seeds 
1 Byte 
1 Bytes 
0/4 bytes 
0x2A 
0: Disable the Scrambler 
1: Enable 32 bit scrambler 
(DPMR Mode only) 
4: Enabled 16 bit scrambler
0 byte if scrambler type = 0; 
4 bytes if scrambler type = 1; 
DATA[0] = SEED[31:24] 
DATA[1] = SEED[24:16] 
DATA[2] = SEED[15:8] 
DATA[3] = SEED[7:0] 
2 bytes if scrambler type = 4; 
DATA[0] = SEED[15:8] 
DATA[1] = SEED[7:0] 
Default 
0 
0,0,0,0 
Table 1-56 SCRAMBLER_SEED Field Format 
 
Note: The 32 bit scrambler is indeed a 16 bit scrambler. The first 16-bit is used as scrambler seed 
which the end user can program. The second 16-bit is an XOR mask, which can be used by radio 
manufacturers to purposely make their radio to be incompatible with radio made by other 
manufactures.  The second 16-bit should have at least 5 “1” to be effective. 
 
For the 16 bit scrambler, when this command is set in TX, please set the PM in HT_CI_PM 
command to enable the encryption function.   
1.2.32 MOD_GAIN 
This message set the modulation gain for the modulator.  
Field Identifier 
Event 
1 Byte 
2 Byte 
0x02C 
Linear gain applied to the modulator in Q16.11 (16 bits total, 11 bits fraction, 
MSB first), with 2048 as 0 dB 
Table 1-57 MOD_GAIN Field Format 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
44
1.2.33 CODEC_SELECT 
This command selects the codec that works with CT3258. Current supported codecs include 
TLC320AIC3204 from TI and WM8758B from Wolfson.  
 
Field Identifier
Codec Selection 
1 Byte 
1 Bytes 
0x02D 
1: TLC320AIC3204
2: WM8758B 
3: ES8338 
 
Others: reserved. 
Default 
2 
Table 1-58 CODEC_SELECT Field Format 
1.2.34 SET_I2C_ADDRESS 
CT3258 also supports other types of codecs, as long as it has an I2C interface for control and a 
serial interface for data transfer which conforms with CT3258 format and timing. The I2C address 
of the codec can be set the command SET_I2C_ADDRESS 
Field Identifier
I2C Address 
1 Byte 
1 Bytes 
0x02E 
I2C address to pass to codec
Default 
0x34 
Table 1-59 SET_I2C_ADDRESS Field Format 
1.2.35 SYNC_MISS_COUNT 
Once a call is set up, CT3258 monitor the link conditions and continuously check the presence of 
synchronization word, (FS2 in the case DPMR and Voice SYNC pattern in DMR). It reports 
SYNC miss if the number of sync miss is greater than a threshold. This command set the 
threshold. 
 
Table 1-60 SYNC_MISS_COUNT Field Format 
 
Field Identifier 
Sync Miss Count 
1 Byte 
1 Bytes 
0x02F 
Threshold for sync miss counter before reporting to MCU. 
0-254: threshold of sync miss to exceed (greater than) before report sync miss
255: never report sync miss 
Default 
255 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
45
The message to report Sync miss is NEW_EVENT with field value of 0x08. 
1.2.36 Q_PRO_STR 
This command enquires for product code. 
Field Identifier
1 Byte 
0x030 
Table 1-61 Q_PRO_STR Field Format 
 
The response packet returns a string: “CT3258” or other product code. 
Field Identifier Number of Bytes
Data 
1 Byte 
1 Byte 
Variable Number of bytes 
0x30 
Number of bytes
“CT3258F” 
Table 1-62 Q_PRO_STR Field Options 
1.2.37 Q_HW_VER 
This command enquires for hardware version. 
 
Field Identifier
1 Byte 
0x031 
Table 1-63 Q_HW_VER Field Format 
 
The response packet returns a string: “V0.01.01” or other hardware version. 
 
Field Identifier Number of Bytes
Data 
1 Byte 
1 Byte 
Variable Number of bytes 
0x31 
Number of Bytes
“V0.02.02” 
Table 1-64 Q_HW_VER Field Options 
1.2.38 Q_SW_VER 
This command enquires for software version: 
 
Field Identifier
1 Byte 
0x032 
Table 1-65 Q_SW_VER Field Format 
 
The response packet returns a string: “V0.01.01” or other software version. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
46
 
Field Identifier Number of Bytes
Data 
1 Byte 
1 Byte 
Variable Number of bytes 
0x32 
Number of Bytes
“V1.00.04” 
Table 1-66 Q_SW_VER Field Options 
1.2.39 Q_CID_SN 
This command enquires for customer ID and serial number. 
Field Identifier
1 Byte 
0x033 
Table 1-67 Q_CID_SN Field Format 
 
The response packet returns customer ID in 6 BCD numbers and serial number in 10 BCD 
numbers. 
 
Field Identifier 
Customer ID 
Serial Number 
1 Byte 
3 Bytes 
5 Bytes 
0x33 
Customer ID in 6 BCD 
numbers 
Serial Number in 10 BCD 
numbers 
Table 1-68 Q_CIN_SN Field Options 
 
1.2.40 DMR_GROUP_ID 
Each DMR terminal can be assigned an individual ID (own ID) and one or several group ID’s. 
When an incoming called ID matched with the receiver’s individual ID or group ID, the receiver 
responds. The DMR_GROUP_ID field is used to pass the group ID to CT3258. 
 
This field contains the group ID in 8 BCD codes and one group number. 
 
Field Identifier
 Group ID and group number 
1 Byte 
5 Bytes 
0x29 
DATA[0]= {K1, K2} 
DATA[1]= {K3, K4} 
DATA[2]= {K5, K6} 
DATA[3]= {K7, K8} 
DATA[4] = Group Number 
where group number can be 1-15
Default 
0,0,0,0 
Table 1-69 GROUP_ID Field Format 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
47
 
K1, … , K8 are 0-9 for BCD numbers. 
 
The command fields support up to 15 group numbers.  
 
 
1.2.41 DC_OFFSET 
This command applies a DC offset to the input signals from the ADC and to the output signal to 
the DAC. It also applies a digital gain to the signals to the DAC before DC offset is added. 
 
The value of the DC offset is in 2’s complements, with 0x7fff corresponds to the maximum 
positive DC offset, and 0x8000 corresponds to the maximum negative DC offsets. The electrical 
voltage of the DC offset depends on the codec types and the analog gain that is applied to the 
codec. 
 
With zero analog gain, the maximum offset is capped by the supply voltage of the codec, and the 
minimum is capped by zero. 
 
In the case of DAC output, a gain is applied to the output signal before DC offset is added. The 
gain is in linear scale, with 0x0800 corresponding to zero gain. 
 
Field 
Identifier 
DC 
offset 
for 
ADC 
Left 
Channel 
DC offset 
for ADC 
Right 
Channel 
DC offset 
for DAC 
Left 
Channel 
DC offset 
for DAC 
right 
Channel 
Digital 
Gain for 
DAC left 
channel 
Digital 
Gain for 
DAC right 
Chanel 
1 Byte 
2 Byte 
2 Bytes  
2 Bytes 
2 Bytes 
2 Bytes 
2 Bytes 
0x039 
DC 
offset 
Value, 
MSB 
followed by 
LSB, 
0x8000-0x7
fff 
DC 
offset 
Value, 
MSB 
followed by 
LSB, 
0x8000-0x7
fff 
DC 
offset 
Value, 
MSB 
followed by 
LSB, 
0x8000-0x7
fff 
DC 
offset 
Value, 
MSB 
followed by 
LSB, 
0x8000-0x7
fff 
Digital 
Gain  
Value, 
MSB 
followed by 
LSB, 
In 
linear 
Scale, 
Q16.11 
Digital 
Gain  
Value, 
MSB 
followed by 
LSB, 
In 
linear 
Scale, 
Q16.11 
Default 
0 
0 
0 
0 
2048 
2048 
Table 1-70 DC_OFFSET Field Format 
 
When paired with SCT3700, DC_OFFSET command is also used to read the DC levels and 
amplitudes of the signal in the RX path. In addtion, the DC levels and amplitudes of TX signal can 
be read by looping the TX to the RX and then read the RX DC levels and amplitudes.  
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
48
To read DC levels and amplitudes, DC_OFFSET command should be sent with “Read/Write” bit 
in the TYPE field set to 1. The DC_OFFSET command used in “read” mode has the following 
format: 
 
Field Identifier 
DC Time Constant 
1 Byte 
1 Byte 
0x39 
Time constant for averaging DC and amplitude.  
Default 
0 
 
Default time constant of 0 corresponds to average time of 31.25 ms, which is the time it takes to 
reach within 10% of the steady state energy value. If the constant is n, the average time is given by 
the following formula: 
 
T = 31.25 * 2^n. 
 
The Response to the read DC_OFFSET read command has the following format: 
 
Field 
Identifier 
DC offset for 
the Left 
Channel 
DC offset for 
the Right 
Channel 
Amplitude for 
the Left 
Channel 
Amplitude for 
the Right 
Channel 
Total energy 
of IQ channel 
Division out 
of 
AMP_I/AMP
_Q 
1 Byte 
2 Byte 
2 Bytes  
2 Bytes 
2 Bytes 
4 Bytes 
1 Byte 
0x039 
DC 
offset 
Value, 
MSB 
followed 
by 
LSB, 
in 
Q16.15, 
0x8000-0x7fff 
DC 
offset 
Value, 
MSB 
followed 
by 
LSB, 
 
in 
Q16.15, 
0x8000-0x7fff
Amplitude 
Value, 
MSB 
followed 
by 
LSB, 
in 
Q16.15 
0x0-0x7fff 
Amplitude 
Value, 
MSB 
followed 
by 
LSB, 
in 
Q16.15 
0x0-0x7fff 
I^2 
+Q^2, 
used to do TX 
DC 
calibration, 
only 
for 
SCT3700, 
Used for IQ 
calibration 
only 
for 
SCT3700 
Default 
- 
- 
- 
 
 
- 
 
1.2.42 ANALOG_CONFIG 
This command changes the CT3258 configuration in analog mode. The parameter that can be 
configured in analog mode include LPF selection for 12.5 kHz or 25 kHz channel spacing, 
pre-emphasis and de-emphasis filter settings, and various gain values at different stages in the 
signal chain. All gain values are linear gain with 16 bit resolution.  
 
Field 
Identifier 
Mode 
Configure 
TX gain 
Before 
Limiter 
TX Gain 
after Limiter
CTCSS 
Gain 
DCS Gain 
RX Volume 
Gain 
1 Byte 
1 Byte 
2 Bytes  
2 Bytes 
2 Bytes 
2 bytes 
2 Bytes 
0x03C 
See Table 
16 bit linear 
16 bit linear 
16 bit linear 
16 bit 
16 bit linear 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
49
Table 1-71 ANALOG_CONFIG Field Format 
 
Bit 
Position 
Bit Name 
Descriptions 
7 
ALT_LPF 
Additional attenuation at 3 kHz when BB_CH_SEL = 1   
6 
DCS_HPF 
DCS high pass filter enable flag, for removing DC 
0: DCS high pass filter is disabled 
1: DCS high pass filter is enabled 
5 
COMPANDER 
Compander enable 
0: Compander is disabled 
1: Compander is enabled. 
4 
ANA_TONE_CFG Analog Tone configure 
0: No CTCSS or DCS when sending analog tones 
1: Send CTCSS or DCS when sending analog tones 
3 
IF_CH_SEL 
IF Channel Select 
0: 12.5 kHz channel 
1: 25 kHz channel  
2 
SKIP_EMP 
Skip pre-emphasis and de-emphasis filters 
0: No skip pre-emphasis and de-emphasis filters 
1: Skip pre-emphasis and de-emphasis filters 
1 
BB_CH_SEL 
Base band channel filter select 
0: LPF corner at 2.55k Hz 
1: LPF corner at 3 kHz 
0 
FILTER_BYPASS 
Filter by pass. All analog signal processing in the TX path and the 
RX path are bypassed if this bit is set.  
Table 1-72 Mode Configure Details 
 
 
Note that IF_CH_SEL and BB_CH_SEL can be different. IF_CH_SEL selects 12.5KHz narrow 
band channel selection filter or 25 kHz wide band channel selection filter. BB_CH_SEL selects 
the base band filter LPF corner. The following table gives a guide line for IF_CH_SEL or 
BB_CH_SEL settings. 
 
IF_CH_SEL BB_CH_SEL Standard 
0 
0 
12.5kHz narrow band channel, compliant with Europe CE 
standards (ETSI EN 300 296)   
0 
1 
12.5kHz narrow band channel, compliant with US FCC standards 
(TIA 603) 
1 
0 
N/A 
1 
1 
25 kHz wide band channel, compliant with Europe CE standards 
1-67 for 
details 
gain, MSB 
first, in 
Q16.11 
gain, MSB 
first, in 
Q16.12 
gain, MSB 
first, in 
Q16.12 
linear gain, 
MSB first, 
in Q16.12 
gain, MSB 
first, in 
Q16.11 
Default 
2 
2048 
4096 
4096 
4096 
2048 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
50
(ETSI EN 300 296) and US FCC standards (TIA 603).  
 
When BB_CH_SEL = 1, the user can configure ALT_LPF, to add an 1.5 dB attenuation at 3kHz. 
This is useful for two point modulation when the VCO boosts the frequency response at 3kHz, 
which may result in the total frequency response out of the spec. 
1.2.43 CTC_PARAM 
This command is used to configure CTCSS detection parameters. The CTCSS detection is done 
with two conditions, frequency and energy. The frequency has to be close to the designated 
CTCSS frequency, and the CTCSS energy has to above a certain threshold. To reduce the 
probability of false detection, both conditions have to be satisfied for a number of times before a 
CTCSS detection is declared. If one of the conditions is not satisfied for a number of times, 
CTCSS lost is declared. This command sets those thresholds. 
 
Instead of using the standard phase reversal as CTCSS tail, SCT3258 can also send 55 Hz tone at 
the end of call as an indication for call end. “55 Hz” is used here as a general term for the special 
tone for call end indication. Its frequency is a programmable. CTC_PARAM command is also 
used to configure the mode and frequency of the 55 Hz tone. Also, as in the CTCSS tone case, a 
narrow band filter (NBF) is used to capture the 55 Hz tone. The coefficients for the NBF need to 
be set in this command if the 55 Hz tone detection is enabled. 
 
 
Freq_Tough 
Eng_Tough 
Tail_180 
Tail_120 
CTC_Tail_DI 
55 
Hz 
Tail 
Configuration 
1 Byte 
1 Bytes  
1 Bytes 
1 Bytes 
1 Bytes 
1 Byte 
Number of 
times 
Number of 
times energy 
180 degree 
CTCSS tail 
120 degree 
CTCSS tail 
CTCSS tail 
detection 
55 Hz Tail 
Configuration, 
Field 
Identifier 
Energy_Hi 
Energy_Lo
Freq_Miss
Eng_Miss 
Freq_norm 
Eng_Norm
1 Byte 
2 Byte 
2 Bytes  
1 Bytes 
1 Bytes 
1 bytes 
1 Bytes 
0x3D 
Energy high 
threshold 
for CTCSS 
found 
detection 
Energy low 
Threshold 
for CTCSS 
lost 
detection 
Number of 
times 
frequency 
conditions 
missed 
before 
declaring 
CTCSS lost
Number of 
times 
energy 
conditions 
missed 
before 
declaring 
CTCSS lost
Number of 
times 
frequency 
conditions 
satisfied 
before 
declaring 
CTCSS 
found under 
good 
condition 
Number of 
times 
energy 
conditions 
satisfied 
before 
declaring 
CTCSS 
found under 
good 
condition 
Default 
0x0384 
0x0258 
6 
4 
2 
1 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
51
frequency 
conditions 
satisfied 
before 
declaring 
CTCSS 
found under 
tough 
condition 
conditions 
satisfied 
before 
declaring 
CTCSS 
found under 
tough 
condition 
detection 
threshold. 
Higher 
threshold 
make it 
more 
difficult to 
detect tail. 
detection 
threshold. 
Higher 
threshold 
make it 
more 
difficult to 
detect tail. 
index, larger 
index value 
makes 
detection 
easier. A value 
of 0 is the 
hardest. 
See Table 
below for 
details 
7 
6 
0x80 
0xd0 
0 
0 
 
 
 
Tail Frequency 
Tail 
NBF 
Coefficients 
Signal to Total Energy 
Ratio 
Reserved 
2 Bytes 
4 Bytes 
1 Byte 
2 bytes 
Special 
Tail 
frequency, 
 
in 
steps of 0.1 Hz 
(MSB first). 55 Hz 
as default. 
 
Narrow band filter 
coefficients for the 
special tail 
frequency. See 
Section 1.2.27 
for details of the 
coefficients 
Signal to Total Energy 
Ratio Threshold for 
CTCSS detection. The 
larger the threshold, the 
more difficult to detect 
 
2, 38 
0, 118, 3, 179 
0xb0 
0 
 
 
Table 1-73 CTC_PARAM Field Format 
 
Bit Position 
Bit Name 
Descriptions 
7 
ANA_END_SEND 
Flag for sending end of transmission 
0: No 17 0A sent after CTCSS/DCS tail is sent 
1: 17 0A sent after CTCSS/DCS tail is sent 
6 
CTCSS_TOL 
CTCSS detection tolerance 
0: No tolerance if received CTCSS frequency is off 
spec 
1: More tolerance if received CTCSS frequency is 
off spec. 
5 
TAIL_LENGTH 
Flag for analog tail length for CTCSS and DCS  
0: tail length 180 ms 
1: tail length 250 ms 
4 
HPF_CORNER 
Flag for analog High pass filter corner 
0: HPF corner at 300 Hz 
1: HPF corner at 450 Hz 
3 
CTC_TAIL_RX 
55 Hz tail detection enable in CTCSS call: 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
52
0: 55 Hz Tone detection enabled 
1: 55 Hz Tone detection enabled 
2 
VOICE_TAIL_RX 
55 Hz tail detection enable in call with no sub-audio:
0: 55 Hz Tone detection enabled 
1: 55 Hz Tone detection enabled 
1 
CTC_TAIL_TX 
55 Hz tail enable in CTCSS call: 
0: No 55 Hz Tone are sent at the end of call 
1: 55 Hz Tone are sent at the end of call 
0 
VOICE_TAIL_TX 
55 Hz tail enable in voice call with no sub-audio: 
0: No 55 Hz Tone are sent at the end of call 
1: 55 Hz Tone are sent at the end of call 
Table 1-74 55 Hz Tail Configuration Details 
 
1.2.44 VOCOER_IO_SET 
This field selects the input and output settings for vocoders. It is most used for voice recording and 
play back. Currently, this command is only used in DPMR mode only. 
 
Field Identifier Recording/Play Back Setting 
1 Byte 
1 Byte 
0x03e 
Vocoder IO configuration, See table below 
Default 
0 
Table 1-75  VOCODER_IO_SET Field Format 
 
Bit Position 
Bit Name 
Descriptions 
7 
Reserved 
Reserved 
6 
MOD_IN 
Modulator input select: 
0: from vocoder 
1: from MCU (through CHAN_D commanad) 
5:4 
ENC_OUT 
Voice encoder output select: 
00: Voice encoder output to modem 
01: Voice encoder output to MCU 
10: Voice encoder output to modem and MCU 
3 
DEC_IN 
Voice decoder input select: 
0: from demodulator 
1: from MCU  (through CHAN_D commanad) 
2 
DEMOD_OUT 
Demodulator output select 
0: to voice decoder 
1: to MCU  (through CHAN_D commanad) and to voice decoder 
1 
Reserved 
Reserved 
0 
Reserved 
Reserved 
Table 1-76 Vocoder IO Configuration Details 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
53
 
With VOCODER_IO_SET command, the user can implement functions like local/remote 
recording and local/remote play back. The following table gives example of the settings. 
 
Function 
Vocoder IO Settings
Local Recording 
0x20 
Remote Recording
0x04 
Local Play back 
0x08 
Remote Play back
0x40 
Table 1-77 Vocoder IO Settings for Different Functions 
1.2.45 MODOUT_CONFIG 
This command is used to configure the phase delay between the two channels in a two point 
modulation scheme. Adding a phase delay between the channels is useful to achieve a flat 
frequency response in two point modulation. The minimum step size is 10.4 us. And maximum 
delay is plus or minus 416 us. For example, if the phase delay time is set to 0x08,the signal at 
LOR is 83.2 us after the signal at LOL .If phase delay time is set to 0xf8, then the signal at LOR is 
83.2 us a head of with the signal at LOL. 
 
Field Identifier 
Phase delay time configure 
Reserved 
1 Byte 
1 Byte 
4 Bytes  
0x041 
Minimum to -40 max to 40, with a 
step size of 10.4 us 
Reserved 
Default 
0 
0,0,0,0 
Table 1-78 MODOUT_CONFIG Field Format 
1.2.46 IQCOMP_COEF 
This command is used when paired with SCT700 only. 
 
This command is used to configure the IQ compensation filter of for the RX path and the TX path.  
If CT3258 works in IQ input or IQ output mode, the I path and the Q path of the RF front en 
should be perfectly matched, or the performance suffers. However, the I path and the Q path are 
never perfectly matched in the analog world. IQ compensation filter are used to re-aligned the IQ 
signals so that they are matched. The figure below shows the control data and control signals of IQ 
compensation filter. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
54
External 
Codec
I
Q
coef_amp
coef_phi
IQ_Mode
I_Out
Q_out
 
Figure 1-1 IQ Compensation Filter 
 
The IQ compensation filter has two operation modes: the normal mode and the calibration mode. 
In normal mode (IQ_Mode = 0), the IQ compensation filter is enabled. In calibration mode 
(IQ_Mode = 1), the IQ compensation filter is disabled, allowing the algorithm to evaluate the 
amount of IQ imbalance, and calculate the filter coefficients coef_amp and coef_phase 
accordingly.  
 
The default values of coef_amp and coef_phi are 0, which should be the value if I and Q path are 
perfect aligned and need to compensation.  
 
In calibration mode, the value coef_phase has no effect, while coef_amp has an effect to the 
output. To complete disable IQ compensation filter, coef_amp should be set to zero, while 
IQ_Mode is set to 1. 
 
CT3258 has internal algorithm to aid the calculation of the IQ compensation filter coefficients. 
The user can use the DC_OFFSET read command to see the effect of the calibration. 
 
The structure of the TX IQ compensation filter and the RX IQ compensation filter are identical. 
Both compensation filters are configured with IQCOMP_COEF command. 
 
The contents of the IQCOMP_COEF command are described in the table below. 
 
Field 
Identifier 
Mode 
Configure 
rx_coef_amp
rx_coef_phi
tx_coef_amp
tx_coef_phi 
1 Byte 
1 Byte 
2 Bytes  
2 Bytes 
2 Bytes 
2 bytes 
0x042 
See Table 
1-80 for 
details 
RX 
amplitude 
coefficient, 
16 bit linear 
value, MSB 
first, in 
Q16.14 
RX phase 
coefficient, 
16 bit linear 
value, MSB 
first, in 
Q16.14 
TX 
amplitude 
coefficient, 
16 bit linear 
value, MSB 
first, in 
Q16.14 
TX phase 
coefficient, 
16 bit linear 
value, MSB 
first, in 
Q16.14 
Default 
2 
0 
0 
0 
0 
Table 1-79 IQCOMP_COEF Field Format 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
55
Bit Position 
Bit Name 
Descriptions 
7 
Reserved 
Reserved 
6 
RX_IQ_MODE 
RX IQ compensation Filter work mode 
0: Enable RX IQ compensation Filter, with coefficients  described 
in the subsequent field parameters 
1: RX IQ compensation Filter in calibration mode (only 
rx_coef_amp is effective) 
5-3 
Reserved 
Reserved 
2 
TX_IQ_MODE 
TX IQ compensation Filter work mode 
0: Enable TX IQ compensation Filter, with coefficients  described 
in the subsequent field parameters 
1: TX IQ compensation Filter in calibration mode (only 
tx_coef_amp is effective) 
1-0 
Reserved 
Reserved 
Table 1-80Mode Configure Details 
 
If Bit 6 (RX_IQ_MODE) is set to 1, the RX phase coefficients in the command do not take effect. 
Likewise, the TX phase coefficients in the command does not take effect unless Bit 2 
(TX_IQ_MODE) of the mode byte is 0. 
 
IQCOMP_COEF command is also used to read the IQ compensation filter coefficients currently 
used by CT3258, either calculated by CT3258 or set previously by the MCU. The response packet 
to the read command is identical to configuration packet. 
 
1.2.47 DIGC_DATA_FRAME 
This field contains type 1, 2, 3 data, voice and appended data, transparent data and short appended 
data. 
 
Field Identifier 
Frame Property 
Data Length 
Data Bytes  
1 Byte 
1 Byte 
1 Byte 
Up to 180 bytes 
0x43 
See the following tables for 
detail 
0-180: Indicate 
the length of the 
Data 
Others: reserved 
DATA[0] 
DATA[1] 
… 
DATA[DataLength-1]
 
Contain 
data, 
start 
from DATA[0], MSB 
first 
Default 
NA 
NA 
NA 
Table 1-81 DIGC_DATA_FRAME Field Format 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
56
The frame property field for DPMR and for DMR are different. 
 
Bit Position 
Bit Name 
Descriptions 
7 
DATA_VALID 
Flag to indicate whether current frame has valid data 
0: Current frame has no valid data. Far end can discard current 
frame 
1: Current frame has valid data. 
6 
CONT_FLAG 
Continuation flag 
0: Data Continues after this frame 
1: Data finish at this frame 
CT3258 does not process this field. It just passes this bit to the far 
end MCU. The MCU should not send more DIGC_DATA_FRAME 
commands after CONT_FLAG is set to one. 
5 
FEC_ERROR 
FEC error flag 
0: No FEC error in the received frame 
1: FEC error in the received frame 
4 
Reserved 
Reserved 
3-0 
Frame Type 
Frame types: 
0: Type 1 Data, Valid Data Length is 0 to 36  
1: Type 2 Data, Valid Data Length is 0 to 20 
2: Type 3 Data, Not implemented yet 
3: Voice and Appended Data, Valid Data Length is 0 to 20 
4: Transparent Data, Valid Data Length is 0 to 48 
5. Short Appended Data, Valid Data Length is 9, 18, 27, 36 
depending on the number of appended data frames. 
Others, reserved 
 
Table 1-82 Frame Property Details in DPMR Mode 
 
Bit Position 
Bit Name 
Descriptions 
7-5 
Reserved 
 
4 
Data/Voice Burst
Data or voice burst selection 
0: Data Burst 
1: Voice Burst 
3-0 
Data Type 
DMR data type (for data burst only) 
0:  PI header 
1:  Voice LC header 
2:  Terminator with LC 
3:  CSBK 
4:  MBC Header 
5:  MBC Continuation 
6:  Data Header 
7:  Rate 1/2 Data 
8:  Rate 3/4 Data 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
57
9:  Idle 
10: Rate 1 Data 
11-15: Reserved 
 
Table 1-83 Frame Property Details in DMR Mode 
 
At the transmitter, the MCU passes the contents of data burst to CT3258 through this field. 
CT3258 adds FEC according to the data type and puts into a TDMA burst. At the receiver, 
CT3258 applies FEC decoding to the received data burst and reports the contents to the MCU 
using the same field. 
 
The content and the length of the frame is different according to the data type in 
DMR_DATA_FRAME. The details is describe in the below text. 
 
When Data Type is PI header , Voice LC Header ,Terminator with LC, or the bit 4 is Voice Burst, 
the content of the frame is FULL LC PDU(without CRC). The length is 9 bytes.  
Table 1-84 FULL LC PDU 
 
When Data Type is CSBK or MBC Header, the content of the frame is Control Signalling Block 
(CSBK) PDU (without CRC ). The length is 10 bytes. 
 
Information element 
Length  
Remark 
Last Block  
1 
This bit shall be set to 1 
Protect Flag  
1 
 
CSBK Opcode(CSBKO) 
6 
 
FID 
8 
The FID shall be either SFID or MFID 
CSBK Data 
64 
 
NOTE : The data information element is defined by TS 102 361-2[5] 
Table 1-85 CSBK PDU 
 
When Data Type is MBC Continuation, the content of the frame can be MBC Continuation Block 
or MBC Last Block.The length is 12 bytes. 
Information element  
Length  
Remark  
Last Block  
1 
 
Information element 
Length 
Remark 
 Protect Flag (PF) 
1 
 
Reserved 
1 
 
Full Link Control Opcode 
(FLCO) 
6 
 
Feature set ID (FID) 
8 
The FID shall be either SFID or MFID 
Error Full LC Data 
56 
(see note 1) 
NOTE 1:   The data information element is defined by the feature protocol document TS 102 
361-2 [5].  
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
58
MBC data  
95 
 
Table 1-86 MBC Continuation Block 
 
Information element  
Length  
Remark  
Last Block  
1 
 
MBC Data  
79 
 
MBC CRC  
16 
Filled with 0, calculated by the chip automatically  
Table 1-87 MBC Last Block 
 
When Data Type is DATA_HEADER, the content of the frame is DATA_HEAD_PDU. We 
introduce the C_HEAD_PDU only (without CRC, the other HEAD_PDU is in the TS 102 361-1 
Protocol ). The length is 10 bytes. 
Information element 
Length 
Remark 
Group or Individual 
1 
This bit is set to indicate that the destination LLID is 
for a group 
Response Requested (A) 
1 
 
Header 
Compression 
(HC) 
1 
 
Pad Octet Count (POC) 
1 
 
Format 
4 
Data packet identification 
SAP Identifier 
4 
 
Pad Octet Count (POC) 
4 
 
Logical Link ID (LLID) 
24 
Destination 
Logical Link ID (LLID) 
24 
Source 
Full 
Message 
Flag 
(FMF) 
1 
 
Blocks to Follow (BF) 
7 
 
Re-Synchronize flag (S) 
1 
 
Send sequence Number 
(N(S)) 
3 
 
Fragment 
Sequence 
Number (FSN) 
4 
 
Table 1-88 C_HEADER_PDU 
 
When 
Data 
Type 
is 
Rate 
1/2 
Data, 
the 
contents 
of 
the 
frame 
can 
be  
Confirm_R_1_2_DATA_CONTINU_PDU, 
UNConfirm_R_1_2_DATA_CONTINU_PDU, 
Confirm_R_1_2_DATA_LAST_PDU or UNConfirm_R_1_2_DATA_LAST_PDU.The length is 
12 bytes. See details from table 1-65 to 1-68. 
 
Information element 
Length 
Remark 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
59
 Data Block Serial Number 
(DBSN) 
7 
 
 C-DATA CRC 
9 
 Filled with 0, calculated by the chip automatically  
 User Data 
80 
 The user data field may contain pad octets 
Table 1-89 Confirm_R_1_2_DATA_CONTINU_PDU 
 
Information element 
Length 
Remark 
User Data 
96 
The user data field may contain pad octets 
Table 1-90 UNConfirm_R_1_2_DATA_CONTINU_PDU 
 
Information element 
Length 
Remark 
Data Block Serial 
Number (DBSN) 
7 
 
C-DATA CRC 
9 
Filled with 0, calculated by the chip automatically 
User Data 
48 
The user data field may contain up to 6 pad octets 
Message CRC 
32 
Filled with 0, calculated by the chip automatically 
Table 1-91 Confirm_R_1_2_DATA_LAST_PDU 
 
Information element 
Length 
Remark 
User Data 
64 
(see note) 
Message CRC 
32 
Filled 
with 
0, 
calculated 
by 
the 
chip 
automatically 
NOTE:The user data field may contain up to 8 pad octets. 
Table 1-92 UNConfirm_R_1_2_DATA_LAST_PDU 
 
When 
Data 
Type 
is 
Rate 
3/4 
Data, 
the 
contents 
of 
the 
frame 
can 
be  
Confirm_R_3_4_DATA_CONTINU_PDU, 
UNConfirm_R_3_4_DATA_CONTINU_PDU, 
Confirm_R_3_4_DATA_LAST_PDU or UNConfirm_R_3_4_DATA_LAST_PDU.The length is 
12 bytes. See details from table 1-69 to 1-72. 
 
Information element 
Length 
Remark 
Data Block Serial 
Number (DBSN) 
7 
 
C-DATA CRC 
9 
Filled with 0, calculated by the chip automatically 
User Data 
128 
The user data field may contain pad octets 
Table 1-93 Confirm_R_3_4_DATA_CONTINU_PDU 
 
Information element 
Length 
Remark 
User Data 
144 
The user data field may contain pad octets 
Table 1-94 UNConfirm_R_3_4_DATA_CONTINU_PDU 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
60
Information element 
Length 
Remark 
Data Block Serial 
Number (DBSN) 
7 
 
C-DATA CRC 
9 
Filled with 0, calculated by the chip automatically 
User Data 
96 
The user data field may contain up to 12 pad octets 
Message CRC 
32 
Filled with 0, calculated by the chip automatically 
Table 1-95 Confirm_R_3_4_DATA_LAST_PDU 
 
Information element 
Length 
Remark 
User Data 
112 
The user data field may contain up to 14 pad octets 
Message CRC 
32 
Filled with 0, calculated by the chip automatically 
Table 1-96 UNConfirm_R_3_4_DATA_LAST_PDU 
When Data Type is IDLE, the content of the frame is IDLE_PDU. The length is 12 bytes.See 
details in table 1-73. 
Information element 
Length 
Remark 
User Data 
96 
 
Table 1-97 IDLE_PDU 
 
When 
Data 
Type 
is 
Rate 
1 
Data, 
the 
contents 
of 
the 
frame 
can 
be  
Confirm_R_1_DATA_CONTINU_PDU, 
UNConfirm_R_1_DATA_CONTINU_PDU, 
Confirm_R_1_DATA_LAST_PDU or UNConfirm_R_1_DATA_LAST_PDU.The length is 24 
bytes. See details from table 1-74 to 1-77. 
 
Information element 
Length 
Remark 
Data Block Serial 
Number (DBSN) 
7 
 
C-DATA CRC 
9 
Filled with 0, calculated by the chip automatically 
User Data 
176 
The user data field may contain pad octets 
Table 1-98 Confirm_R_1_DATA__CONTINU_PDU 
 
Information element 
Length 
Remark 
User Data 
192 
The user data field may contain pad octets 
Table 1-99 UNConfirm_R_1_DATA__CONTINU_PDU 
 
Information element 
Length 
Remark 
Data Block Serial 
Number (DBSN) 
7 
 
C-DATA CRC 
9 
Filled with 0, calculated by the chip automatically 
User Data 
144 
The user data field may contain up to 18 pad octets 
Message CRC 
32 
Filled with 0, calculated by the chip automatically 
Table 1-100 Confirm_R_1_DATA__LAST_PDU 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
61
 
Information element 
Length 
Remark 
User Data 
160 
(see note) 
Message CRC 
32 
Filled with 0, calculated by the chip automatically 
NOTE:The user data field may contain up to 20 pad octets. 
Table 1-101 UNConfirm_R_1_DATA__LAST_PDU 
1.2.48 DPMR_PREAMBLE_LENGTH 
DPMR standard allows the length of the preamble to be more than the default 72 bits (15 
milliseconds). This command sets the length of additional preambles and length of silence (before 
preamble) in increment of 20 milliseconds 
 
Field Identifier 
Preamble Length 
Silence Length 
1 Byte 
1 Bytes 
1 Byte 
0x046 
Length additional Preambles in 20 
millisecond unit  
Silence length before preamble in 20 
millisecond unit 
Default 
0 
0 
Table 1-102 DPMR_PREAMBLE_LENGTH Field Format 
1.2.49 DPMR_CALL_OPTION 
This field is used to set the DPMR specific call options 
 
Field Identifier 
 DPMR Call Options 
1 Byte 
5 Bytes 
0x47 
Data[0]: 
Bit 7: Slot timing flag 
0: The message sent to far end can be sent freely 
1: The message sent to far end has to be sent at slot 
boundary. The first bit of the preamble will be sent 30 
milliseconds from the last bit of the last received 
message 
Bit 6: SQ detection enable 
  0: SQ detection is not done by CT3258 
  1: SQ detection is done by CT3258 
Bit 5: IQ receive enable 
  0: CT3258 in IF IQ mode 
  1: CT3258 in base band mode 
Bit 4: RF control enable 
  0: CT3258 does not control RF chip (SCT3700) 
  1: CT3258 controls RF chip. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
62
Bit 3-0: Number of the power saving headers to precede 
the next message. Zero to disable power saving headers 
 
Data[1]: voice delay constant and transmit control 
Bit 7: IQ transmit enable 
0: CT3258 transmitting in IQ mode 
1: CT3258 transmitting in base band mode 
Bit 6: Enable Wrong Vocoder report 
Bit 5:0: voice delay constant   
0-40:  voice delay constant in steps of 40 
milliseconds 
Data[2]: Report options 
Bit 7: 1B 09, 1B 0A report 
0: No report of 1B 09 and 1B 0A 
1: Report 1B 09 and 1B 0A 
    Others: reserved 
Default 
0 
 
Table 1-103 DPMR_CALL_OPTION Field Format 
Note: In order to send extended power saving headers, DPMR_CALL_OPTION must be called 
each time when a communication is to start 
1.2.50 DPMR_END_UE 
This field contains the 17 bits of unencoded END data. 
 
Field Identifier 
 17 bit of unencoded END 
1 Byte 
3 Bytes 
0x4B 
DATA[0]={ET[1:0], ARQ[1:0], TX_WAIT[3:0]} 
DATA[1]={STATUS[4:0], 3b000} 
DATA[2]=0 
Default 
0,0,0 
Table 1-104 DPMR_END_UE Field Format 
The details of ET, ARQ, TX_WAIT and status are given in the following tables. 
 
00 Normal end frame 
01 End frame with status message
10 Reserved 
11 Reserved 
Table 1-105 Details ET Field 
 
00 No ACK request to called station
01 ACK request to called station 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
63
10 Reserved 
11 Reserved 
Table 1-106 ARQ Field Details 
 
0000
No specified time 
0001
40 ms (half a frame) 
0010
80 ms (one frame) 
0011
160 ms (two frames) 
0100
320 ms (one superframe)
Other
Other Reserved 
Table 1-107 Details of Tx WAIT Field 
1.2.51 DIGC_FS1 
This field contains the 48 bits of FS1 data for DPMR. It is also used to generate a fixed 48 bit test 
pattern for both DPMR and DMR mode. 
 
Field Identifier
 48 bit of encoded FS1 
1 Byte 
6 Bytes 
0x4C 
DATA[0]=FS1[47:40] 
DATA[1]=FS1[39:32] 
… 
DATA[5]=FS1[7:0] 
Default 
0x57,0xff,0x5f,0x75,0xd5,0x77
Table 1-108 DIGC_FS1 Field Format 
1.2.52 DIGC_CALLED_ID_BIN 
This field contains the called ID in 24 bit binary form. 
 
Field Identifier
 24 bit binary called ID 
1 Byte 
3 Bytes 
0x50 
DATA[0]=CALL_ID_BIN[23:16]
DATA[1]= CALL_ID_BIN [15:8]
DATA[2]= CALL_ID_BIN [7:0] 
Default 
0,0,0 
Table 1-109 DIGC_CALLED_ID_BIN Field Format 
1.2.53 DIGC_OWN_ID_BIN 
This field contains the own ID in 24 bit binary form. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
64
Field Identifier
 24 bit binary own ID 
1 Byte 
3 Bytes 
0x51 
DATA[0]=OWN_ID_BIN[23:16]
DATA[1]= OWN_ID_BIN [15:8]
DATA[2]= OWN_ID_BIN [7:0] 
Default 
0,0,0 
Table 1-110 DIGC_OWN_ID_BIN Field Format 
1.2.54 DPMR_CALLED_ID_BCD 
This field contains the called ID in 7 BCD codes. 
Field Identifier
 Called ID in 7 BCD codes
1 Byte 
4 Bytes 
0x52 
DATA[0]= {K1, K2} 
DATA[1]= {K3, K4} 
DATA[2]= {K5, K6} 
DATA[3]= {K7, 0x4b0000}
Default 
0xaa,0xaa,0xaa,0xa0 
Table 1-111 DPMR_CALLED_ID_BCD Field Format 
 
If the user dials less than 7 digits, the user should use 0x0F to fill the place for un-dialed digits. 
Upon receiving the message with less than 7 digits, CT3258 will fill the rest of the digits to 
complete 7 digits if layer 3 process mode is enabled. 
1.2.55 DPMR_OWN_ID_BCD 
This field contains the own ID in 7 BCD codes. 
Field Identifier
 Own ID in 7 BCD codes 
1 Byte 
4 Bytes 
0x53 
DATA[0]= {K1, K2} 
DATA[1]= {K3, K4} 
DATA[2]= {K5, K6} 
DATA[3]= {K7, 0x4b0000}
Default 
0x00,0x00,0x00,0x00 
Table 1-112 DPMR_OWN_ID_BCD Field Format 
1.2.56 DPMR_M_V_F_E 
This field contains communication mode (M), version (V),  and communication format (F) fields. 
 
Field Identifier 
 M and F fields 
1 Byte 
1 Byte 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
65
0x54 
DATA[0]={M[2:0], V[1:0], F[1:0], EP} 
Default 
0 
Table 1-113 DPMR_M_V_F Field Format 
 
The meaning of M, V, F and EP are described in section CALL_START. 
1.2.57 DPMR_PROTOCOL_OPTION 
This field is used to set the DPMR specific protocol options 
 
Field Identifier 
 DPMR Protocol Options 
1 Byte 
1 Byte 
0x55 
Bit 7: Protocol Support 
  0: Support TS 102 490 
  1: Support TS 102 490 and TS 102 658 
Bit 6: NDR Support 
  0:  No Support for NDR 
  1:  Support for NDR 
Bit 5 : TS 102 658 Mode 3 Support 
  0:  No Support for Mode 3 
  1:  Support for Mode 3 
Bit 4: Maintenance Message Report 
  0: Repeated Maintenance Message only reported only once. 
1: Every reported messages are reported  
Bit 3: Reserve (Should set to zero) 
Bit 2: Reserve 
Bit 1 : All call mapping 
  0: Old way of all call mapping: TS 102 658 (V2.1.1 or 
earlier) 
  1: New way of all call mapping  
Bit 0 : 12.5 kHz DPMR support. 
  0: 6.25 kHz DPMR 
  1: 12.5 kHz DPMR 
Default 
0 
Table 1-114 DPMR_PROTOCOL_OPTION Field Format 
1.2.58 DPMR_SLD 
This field contains 18 bits of slow data. 
 
Field Identifier
 M and F fields 
1 Byte 
4 Bytes 
0x56 
DATA[0]=SLD[17:10] 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
66
DATA[1]=SLD[9:2] 
DATA[2]={SLD[1:0], 0x000000} 
Default 
0x80,0x40,0x00 
Table 1-115 DPMR_SLD Field Format 
 
The meaning of SLD field is defined in the TS 102 658 or TS 102 490: 
 
Bit position 
 Meaning 
17 
Continuation Flag 1 
0: User data continuous after the following byte 
1: User data is terminated by the following byte 
16-9 
User data byte 1 
8 
Continuation Flag 2 
0: User data continuous after the following byte 
1: User data is terminated by the following byte 
7-0 
User data byte 2 
Table 1-116 Details SLD Field 
 
Note that SLD filed can also be modified by WORK_MODE command. Upon receiving command 
WORK_MODE with the mode set to TX or duplex, the SLD field is reset to default 0x80, 0x40, 
0x00. In a typical voice call with slow data, the MCU always send WORK_MODE command 
before sending the first DPMR_SLD command.  
1.2.59 DPMR_HT_CI_PM 
This field contains header type (HT) and call information (CI) fields. 
 
Field Identifier
 HT and CI fields 
1 Byte 
2 Bytes 
0x57 
DATA[0]={HT[3:0], CI[10:7]}
DATA[1]={CI[6:0], PM} 
Default 
0,0 
Table 1-117 DPMR_HT_CI_PM Field Format 
 
Details of HT, CI and PM can be found in the following tables. 
 
HT indicates header type. 
 
0000  
Communication start header (a superframe follows) 
0001 
Connection request header (an END frame follows) 
0010 
Unconnect request header (an END frame follows) 
0011 
ACK (this a single frame, ACK or NACK is differentiated by the CI bits setting) 
0100 
System request header (an END frame follows) or Maintenance Message header 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
67
0101 
ACK header reply to a system request (a superframe follows) 
0110 
System delivery header (a superframe follows) 
0111 
Status response header (an END frame follows) 
1000 
Status request header 
Other  
Reserved 
Table 1-118 Header Type Details 
 
PM is the channel preservation flag used for base station to send out channel preservation 
messages. When sending a voice call, this bit is used to enable the encryption. 
 
PM Channel Preservation Flag
0 
Channel is not preserved 
1 
Channel is preserved 
Table 1-119 Channel Preservation Flag Field Details 
 
CI contains 3 bits of CI type and 8 bits of CI information.  
 
CI Type
CI Information
3 bits 
8 bits 
Table 1-120 CI Format 
 
The meaning of CI depends on the header types. 
 
Use 
Purpose 
Power save 
Indicate normal or extended header type  
T1 or T2 Data 
Indicate the type of data (supplementary service) 
T3 Data (Packet) 
Indicate data frame size and number of frames  
Acknowledgements Indicate ACK or NACK and reason  
System request 
System response 
Delivery Header 
CI Type defines the purpose 
CI Information is not used and set to 0000 0000 
Table 1-121 CI Usuage 
 
The details of CI for different header types are described in the following sub-sections, 
1.2.59.1 Call Information for Power Save 
CI Type (3 bits): 
CI Type 
Definition 
111 
Extended wake-up Header
Other value
Normal Header type 
Table 1-122 CI Type for Power Save 
 
If the extended wake-up Header is used then the last 4 information bits will show how many 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
68
Headers frames follow the current one (i.e. counting down to zero). 
 
0000 0000 
Normal Header frame 
0000 0001 
-------------- 
0000 1111 
 
Ext Header frame 1 
------------------------------------------------------- 
Ext Header frame 15 
 
Other 
Reserved 
Table 1-123 CI Information for Power Save 
1.2.59.2 Call Information for Types 1 and 2 data 
Data communications (types 1 and 2): 
 
CI Type 
CI Information 
001 
Format 
Reserved 
4 bits 
4 bits 
Table 1-124 CI Type for Type 1 and Type 2 Data 
 
Reserved bits are set to 0000. 
Format: 
0000 
Status message 
0001 
Precoded message 
0010 
Free text message (radio generated data)
0011 
Short file transfer 
0100 
User defined data 1 
0101 
User defined data 2 
0110 
User defined data 3 
0111 
User defined data 4 
Other Reserved 
Table 1-125 CI Information for Type 1 and Type 2 Data 
1.2.59.3 Call Information for Type 3 (packet) data 
Information bits for Packet data format (Type 3): 
 
CI Type 
CI Information 
011 
pdS Frame Size 
pdM Data Size 
4 bits 
4 bits 
Table 1-126 CI for Type 3 Data 
 
Details of pdS (packet data size) and pdM (number of transmitted frames) are details by the tables 
below. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
69
pdS 
Frame time (ms)
Data size bits
0   
80 
288 
1 
160 
672 
2 
240  
1056 
3 
320  
1440 
Other Reserved  
Reserved 
Table 1-127 Packet Data Frame Sizes (pdS) 
 
pdM
Number of Data frames
0 
1 frame 
1 
2 frames 
2 
3 frames 
3 
4 frames 
4 
5 frames 
5 
6 frames 
6 
7 frames 
7 
8 frames 
Other
Reserved 
Table 1-128 Number of Transmitted Frames (pdM) 
1.2.59.4 Call Information for System Transactions 
System request/answer/delivery header: 
 
CI  Type Definition 
000 Reserved 
001 Dynamic group request/answer/delivery 
010 Reserved 
011 Reserved 
100 ESN request/reply 
101 MFID request/reply 
110 Contact station address(via Interconnect, IP)
111 Reserved 
Table 1-129 CI Type for System Transactions 
 
CI Info 
Definition 
0000 0000 All bits set to zero (the data size is
indicated in the CCH SLD field) 
Table 1-130 CI Information for System Transactions 
1.2.59.5 Call Information for Acknowledgments 
Acknowledgment: 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
70
CI Type Definition 
000 
Reserved 
001 
ACK (Rx OK) 
010 
NACK (data error, resend request)
011 
NACK (request denied) 
Other 
Reserved 
Table 1-131 CI Type for Acknowledgements 
 
CI Info 
Definition 
0 
 
1 to 255 ACK/NACK status (rejection reason defined by user) 
Table 1-132 CI Information for Acknowledgements 
1.2.59.6 Call Information for appended data 
CI type: 
 
CI 
Type Definition
Meaning 
000
Short Data 
Service Requested is Short Data 
011
Call Diversion 
Call Diversion Service 
Table 1-133 CI type for Appended data 
 
Short data CI Info: 
 
CI Info 
length 
Meaning 
UAD(0 - 3)
[7:6],2 bits 
Appended Short Data Number of appended UDTs 
required to transport short data  
SYMB 
[5:0],6 bits 
Number of symbols in the short data , 
Table 1-134 CI Information for Short data 
 
Call Diversion CI Info: 
 
CI Info 
Length 
Meaning 
UAD(00) [7:6],2 bits 
Number of Appended Data = 1 
SYMB 
[5:0],6 bits 
N/A for call diversion 
Table 1-135 CI Information for Call Diversion 
1.2.59.7 Call Information for Maintenance Message 
CI type 
Type Definition 
CI Info 
000 
IDLE Message 
N/A 
001 
Guard Message 
See table below 
 
Preservation message
See note 
Table 1-136 Call Information for Maintenance Message 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
71
CI Info 
length 
Meaning 
Reserved 
[7:4],4bits 
Reserved 
Guard Kind 
[3:0],4 bits 
0000 
Reserved 
0001 
DIS_PTT 
Disable Target MS or 
Talkgroup PTT 
0010 
EN_PTT 
Enable Target MS or 
Talkgroup PTT 
 
 
0011 
 
ILLEGALLY 
PARKED 
Clear down from the 
payload channel MS 
whose address does not 
match,Source or Target 
Address 
0100 to 1111
Reserved 
Table 1-137 Call Information for Guard Message 
 
Note: Preservation message is not identified by CI. It is identified with PM as 1. In preservation 
message, CI keeps value of previous traffic channel down link messages, along with CALLED ID, 
OWN ID, M, V, F, and EP fields. 
1.2.60 DPMR_CI 
This field contains 11 bits call information. It is used for reporting CI information by CT3258 to 
the MCU upon receiving an extended header. 
 
Field Identifier
 CI field 
1 Byte 
2 Byte 
0x5A 
DATA[0]={CI[10:3]} 
DATA[1]={CI[2:0], 0x5b00000}
Default 
0,0 
Table 1-138 DPMR_CI Field Format 
1.2.61 DPMR_CC 
This field contains the 24 bits of CC data for the transmitter and the receiver. 
 
Field Identifier
 24 bit of encoded CC
1 Byte 
3 Bytes 
0x5C 
DATA[0]=CC[23:16] 
DATA[1]=CC[15:8] 
DATA[2]=CC[7:0] 
Default 
0x57, 0x75,0x77 
Table 1-139 DPMR_CC Field Format 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
72
1.2.62 DPMR_SEND_SF 
Send super frame command. Upon receiving this command, CT3258 assemble a super frame and 
send to the far end. 
 
Field Identifier
1 Byte 
0x5F 
Table 1-140 DPMR_SEND_SF Field Format 
1.2.63 DPMR_SEND_HEADER 
Send header frame command. Upon receiving this command, CT3258 assemble a header frame 
and send to the far end. 
 
Field Identifier
1 Byte 
0x60 
Table 1-141 DPMR_SEND_HEADER Field Format 
1.2.64 DPMR_SEND_END 
Send end frame command. Upon receiving this command, CT3258 assemble an end frame and 
send to the far end. 
 
Field Identifier
1 Byte 
0x61 
Table 1-142 DPMR_SEND_END Field Format 
1.2.65 DPMR_SEND_AD 
Send DPMR_SEND_AD command. Upon receiving this command,CT3258 assemble  a series of 
appended data frmae，include HEADER FRAME ,APPENDED DATA FRAME (according as 
appended data number),END FRAME. 
 
Field Identifier 
Call Details 
1 Byte 
1 Byte 
0x62 
DATA[0]={M[2:0], V[1:0], F[1:0], EP} 
Call Mode, Version, Call Format, 
Emergency Priority 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
73
Default 
0 
Table 1-143 DPMR_SEND_AD Field Format 
 
DPMR_SEND_AD can only be used in TS 102 658 PROTOCOL. 
 
The meaning of M, V, F and EP fields are described in the section CALL_START. 
 
Note: Please set the content of appended data frame with DIGC_DATA_FRAME command before 
sending appended data frame with this command. 
1.2.66 DIGI_MIC_GAIN 
This message set the modulation gain for the microphone used in the digital mode only. 
 
Table 1-144 DIGI_MIC_GAIN Field Format 
1.2.67 DIGI_SPEAKER_GAIN 
This message set the modulation gain for the speaker used in the digital mode only. 
 
Table 1-145 DIGI_SPEAKER_GAIN Field Format 
1.2.68 I2C_OPERATION 
This command is used to read and write raw I2C command to the I2C devices that are connected 
to CT3258. Examples of the connected devices include codec, security keys and RF transceiver.  
 
This command differs from the codec bypass packet described in 1.1.3 in that codec bypass packet 
can only be used for certain codecs, while I2C_OPERATION can be used for any connected I2C 
devices. 
 
 
Field Identifier 
Event 
1 Byte 
2 Byte 
0x068 
Linear gain applied to the microphone in Q16.11 (16 bits total, 11 bits fraction, 
MSB first), with 2048 as 0 dB. This gain is used in digital mode only 
 
Field Identifier 
Event 
1 Byte 
2 Byte 
0x069 
Linear gain applied to the speaker in Q16.11 (16 bits total, 11 bits fraction, 
MSB first), with 2048 as 0 dB. This gain is used in digital mode only 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
74
Table 1-146 I2C_OPERATION Write Field Format 
 
To read from I2C device, the user should set TYPE field to 0x20, and the I2C_OPERATION 
syntax is as follows: 
 
Field Identifier 
I2C device Address
Device register address
I2C Data Length 
1 Byte 
1 Byte 
1 Byte 
1 Byte 
0x06A 
I2C device address 
Device register address 
Number of Bytes to 
Read 
Default 
0 
0 
0 
Table 1-147 I2C_OPERATION Read Field Format 
 
The response packet returns the I2C data 
 
Field Identifier
Data read from I2C 
1 Byte 
I2C Data Length 
0x6A 
Data[0] 
Data[1] 
… 
Data[I2C Data Length-1]
Default 
0 
Table 1-148 I2C_OPERATION Read Response Field Format 
1.2.69 MISC_GAIN 
This command set the various gain levels, including the input and output gain for IQ signal, and 
CTCSS/DCS receive gains, and frequency of the signal used for calibration, and DC filter settings.  
 
Field 
Identifier 
IQ TX Gain
IQ RX Gain
CTCSS/DCS 
Receive 
Gain 
Calibration 
Signal 
Frequency 
DC Filter 
Configuration 
Reserved
1 Byte 
2 Bytes  
2 Bytes 
2 Bytes 
2 Bytes 
1 Byte 
3 Bytes 
0x06B 
16 bit linear 
16 bit linear 
16 bit linear 
16 bit linear 
See table 
 
Field 
Identifier 
 I2C 
device 
Address 
Device register 
address 
I2C Data Length 
I2C data 
1 Byte 
1 Byte 
1 Byte 
1 Byte 
I2C Data Length 
0x06A 
I2C 
device 
address 
Device 
register 
address 
Number of Bytes to 
Write. 
Data[0] 
Data[1] 
… 
Data[I2C Data Length] 
Default 
0 
0 
0 
N/A 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
75
gain, MSB 
first, in 
Q16.11 
gain, MSB 
first, in 
Q16.11 
gain, MSB 
first, in 
Q16.11 
gain, MSB 
first, in 
Q16.11 
below for 
detail. 
Default 
2048 
2048 
2048 
2048 
0 
 
Table 1-149 MISC_GAINS Field Format 
 
Bit Position 
Bit Name 
Descriptions 
7-2 
Reserved 
 
1 
DC Filter enable
0: DC filter is disabled 
1: DC filter is enabled. 
0 
Manual DC 
Mode 
0: Auto DC Mode, DC filter is 
enabled at low input level and 
disabled at high input level for digital 
calls, and always enabled for analog 
call. 
1: Manual DC Mode. See bit 1 for 
details. 
Table 1-150 DC Configuration Detail 
 
 
The IQ RX gain is applied to the input IQ signals (when IQ receive is enabled) after it is received 
by CT3258. The IQ TX gain is applied to the output IQ signals (when IQ transmit is enabled) 
before it is sent to the codec. 
 
The CTCSS/DCS receive gain is used in analog mode, and is applied to the CTCSS/DCS signals 
after the 300 HF LPF. It is used to adjust the level of DCS subaudio signals without affecting the 
level of audio signals. 
 
The calibration signals are I / Q sinusoidal signals generated by CT3258 TX path, which can be 
looped back by SCT3700 to CT3258 RX for I Q calibration. The frequency of the signals can be 
programmable with this command. A default value of 2048 corresponds to a frequency of 350 Hz. 
 
1.2.70 SQ_LEVEL 
This command is used for calibration of SQ detection. It is also used to read the RSSI and OOBE 
levels.  
 
 
Field 
Identifi
er 
GAIN_ 
ADJUS
T 
EXT 
LNA_ 
GAINL 
Forced 
RF 
Gain 
OOBE_
INTV 
OOBE
_HI_D
OOBE
_LO_D
OOBE 
_HI_A 
OOBE 
_LO_A 
1 Byte 
1 Byte 
1Byte 
1 Byte
1 Byte
2 Bytes
2 Bytes
2 Bytes 
2 Bytes 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
76
0x06C 
Gain 
Adjust
ment, 
from 
-128 dB 
to +127 
dB   
Externa
l LNA 
value.  
Refer to 
table 
below. 
Forced 
RF 
Gain 
Setting. 
See 
table 
below 
for 
Details 
OOBE 
detectio
n 
interval 
in units 
of 
1.333 
ms.  
Digital
OOBE 
high 
thresh
old, 
16 bit 
linear 
value 
Digital
OOBE 
low 
thresh
old, 
16 bit 
linear 
value 
Analog
OOBE 
high 
thresh
old, 
16 bit 
linear 
value 
Analog
OOBE 
low 
thresh
old, 
16 bit 
linear 
value 
Default 
0 
0 
0 
90 
0x4000
0x0400
0x4000 
0x0400 
Table 1-151 SQ_LEVEL Field Format 
 
Bit Position 
Bit Name 
Descriptions 
7 
Forced 
RF 
Gain 
Enabled 
0: Forced RF Gain Disable. RF gain controlled by AGC 
algorithm 
1: Forced RF Gain Enabled. RF gain are setting by bit 6-0.  
6-0 
Gain Details 
RF Gain Details: It is different for RDA1847 or SCT3700 
For RDA1847,  
0-15, Gain Index 
Others, reserved 
 
For SCT3700 
Bit 6-4: LNA gain setting 
   001: highest gain 
   010: highest gain -6 dB 
   011: highest gain -12 dB 
   100: highest gain -24 dB 
   101: highest gain -36 dB 
   110: highest gain -48 dB 
   Others: reserved 
 
Bit 3-0: PGA settings: 
   0000: lowest gain 
   0001-1100, 2-24 dB, 2 dB a step 
   Others, reserved 
Table 1-152 Force RF Gain Details 
 
Bit Position 
Bit Name 
Descriptions 
7:0 
External 
LNA 
gain 
Setting 
Only For SCT3700 
Bit 7:6: Reduction of AGC target level.  
00: Maximum AGC target level used 
01: Maximum AGC target level – 6 dB 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
77
10: Maximum AGC target level – 12 dB 
11: Maximum AGC target level – 18 dB 
 
Bit 5:0: External LNA gain in db if it is used.  
If the external LNA is not used, the value is always zero. If 
the external LNA is used, it is the difference of external 
gain value when external LNA is enabled and when it is 
disabled. Please refer to Chapter 2.6 for its usage. 
 
Table 1-153 External LNA setting Details 
 
GAIN ADJUST is used to account for all unspecified gains in the analog path. It may be different 
with different analog implementations. It may be even different from radio to radio. The RSSI is 
correct only if the value is set correctly. If external LNA is used, it need to be disabled when 
calibrating GAIN_ADJUST. 
 
If external LNA is not used, “EXT LNA GAIN” should be assigned to its default value of zero. 
 
If external LNA is used, the user should set EXT LNA GAIN appropriately to reflect the 
characteristic of the external LNA. It involves two part. Bit 5-0 is used to set the value of LNA 
gain in dB. It reflect the receive gain increase when the external LNA is enabled from when it is 
disabled. Also, if the external LNA is used, the user should lower the maximum SCT3700 AGC 
gain to avoid saturating the RX signals. The amount of maximum AGC target level decrease are 
set by bit 7-6 of “EXT LNA GAIN” fields. The following is a guide line: 
 
00: if the external LNA gain is less than 6 dB. 
01: if the external LNA gain range in 6-12db 
10: if the external LNA gain range in 12-18db 
11: if the external LNA gain range in 18-24db 
 
OOBE indicates the energy of FM demodulated signals at frequency band above 3 kHz. OOBE 
value is small when RF carrier signal exists, and large when no carrier signals present. It is a good 
indication for SQ (or carrier) detection. Typically, when carrier signals present, OOBE level is 
below 8.  
 
OOBE level has a high threshold and a low threshold for SQ detection, with the high threshold 
larger than the low threshold. To detect the presence of carrier, the OOBE level is compared with 
the low threshold. Carrier detection is reported if the OOBE level is above the low threshold. Once 
carrier is found, the OOBE level is compared with the high threshold. If the OOBE level is lower 
than the high threshold, carrier lost is reported.  
 
The OOBE levels for analog and digital calls are different. As a result, CT3258 has two sets of 
high and low OOBE threshold for digital and analog separately. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
78
SQ_LEVEL command is also used to read narrow, wide band RSSI and OOBE levels. The 
response packet has the following format. 
 
Field Identifier 
NB_RSSI 
WB_RSSI 
OOBE Level 
Inband Level 
1 Byte 
1 Byte 
1 Byte 
2 Byte 
2 Byte 
0x06C 
Narrow band 
RSSI + 137 
Wide band RSSI + 
137 
OOBE level 
Inband signal 
energy level 
Default 
 
 
 
 
 
There are two RSSI estimators in the CT3258. One of them is narrow band RSSI, used to estimate 
the energy of signals in the channel of interests. The other is wide band RSSI, used to estimate the 
energy of the signal in the channel of interests and surrounding channels. All RSSI values in this 
command are of dB scale. 
 
All RSSI values are expressed as unsigned 8 bit integer. The real RSSI is this value minus 137. 
For example, for WB_RSSI value of 17, the real wide band RSSI is 17 – 137 = -120 dBm.  
1.2.71 SPI_OPERATION 
This command is used to write raw SPI command to the SPI devices that are connected to CT3258. 
Examples of the connected devices include SCT3700.  
 
Field Identifier 
 SPI Register Address
SPI register Contents 
1 Byte 
1 Byte 
1 Byte 
0x06D 
 SPI Register Address
SPI register Contents 
Default 
0 
0 
Table 1-154 SPI_OPERATION Write Field Format 
 
The SPI register table for SCT3700 can be found in SCT3700 data sheet. 
 
1.2.72 DMR_SLC 
This command is used to report the short LC data from the base station.  
 
Field Identifier
Offset 
1 Byte 
4 Bytes  
0x06E 
Contains 28 bit of SLC data 
Default 
0 
Table 1-155 DMR_SLC Field Format 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
79
1.2.73 DMR_CALL_SLOT 
This field is used to set the slot number for the transmitting or receiving calls. 
DMR_CALL_
SLOT 
Call 
Timing 
Update 
Direct TDMA 
Rev 
Slot mode 
1 BYTE 
BIT[7] 
BIT[6] 
BIT[3] 
BIT[4] 
BIT[3:0] 
0x6F 
0:Receive Call 
1:Transmit Call 
0: 
keep 
current 
TX timng 
1: Update 
TX timing 
according 
RX timing
0: Direct TDMA 
Mode disabled 
1: Direct TDMA 
mode enabled  
Reserved 
0:random 
1:slot1 
2:slot2 
3:both(only Rx)
 
Table 1-156 DMR_CALL_SLOT Field Format 
 
Note that the slot number is in terms of mobile station slot number, or downlink slot number. 
1.2.74 EQULIZER_FILTER 
This command configures the coefficients for the audio equalizer filters. A total of up to three 
equalizer filters can be enabled. Each filter is a second order IIR filter implemented in straight 
form. The transfer function of the filters are shown in the following equation: 
 
H(z) = (b0 + b1 * z^(-1) + b2*z^(-2)) / (1 + a1 * z^(-1) + a2 * z^(-2)) 
The sampling rate of the filter is 24 kHz. 
 
This command gives the filter coefficients. All coefficients are in Q16.14 format (16 bit total, with 
14 bit fraction), with MSB first 
 
By default, no equalizer filter is enabled. 
 
Field Identifier Filter Selection Byte  
a1 
a2 
b0 
b1 
b2 
1 Byte 
1 Byte 
2 Bytes
2 Bytes
2 Bytes
2 Bytes 2 Bytes
0x70 
Bit 7-6: reserved 
Bit 5: TX or RX selection 
0: Filter at RX side 
1: Filter at TX side 
Bit 4: Enable flag 
 1: Selected filter enabled 
 0: Selected filter not enabled
Bit 3-0: Filter selection 
a1 in  
Q16.14
MSB  
first 
a2 in 
Q16.14
MSB  
First 
b0 in 
Q16.14
MSB  
First 
b1 in 
Q16.14 
MSB  
first 
b2 in 
Q16.14
MSB  
First 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
80
   1: Filter 1 selected 
   2: Filter 2 selected 
   3: Filter 3 selected 
   Others: reserved 
Default 
0 
- 
- 
- 
- 
- 
Table 1-157 EQUALIZER FILTER Field Format 
1.2.75 DMR_FLC 
This message set the information for the FLC in a DMR control packet. 
 
Field Identifier
FLC 
1 Byte 
3 Byte 
0x076 
Data[0] = {PF, REV, FLCO[5:0]}
Data[1] = {FID[7:0]} 
Data[2] = {SeversOption[7:0]} 
 
Table 1-158 DMR_FLC Field Format 
 
Details of the elements are defined in the DMR standard (TS 102 361) 
 
PF field is defined by： 
 
PF 
Protect Flag 
0 
Reserved 
Table 1-159 PF Settings 
 
FLCO field is defined by: 
 
FLCO 
Full Link Control Opcode 
000000 
Group Voice Call（Grp_V_Ch_Usr） 
000011 
Unit to Unit Voice Call（UU_V_Ch_Usr）
Table 1-160 FLCO Settings 
 
FID field is defined by: 
 
FID 
Feature set ID  
0000 0000 
Standardized feature set ID for the services 
0000 0001 
Reserved for future standardization  
0000 0010 
Reserved for future standardization 
0000 0011 
Reserved for future standardization 
0000 0100 
Manufacture’s specific feature set ID(MFID) 
Etc. 
Etc 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
81
0111 1111 
Manufacture’s specific feature set ID(MFID) 
1xxx xxxx 
Reserved for future MFID’s allocation(MFID) 
Table 1-161 FID Settings 
 
Service Option field is defined by: 
Service option element  
Bit position
Value remark 
Emergency 
Bit[7] 
0:Non-Emergency service 
1:Emergency service 
Privacy 
Bit[6] 
0:privacy is not defined 
Reserved 
Bit[5:4] 
00:Reserved for future 
Broadcast 
Bit[3] 
0:Non-broadcast service 
Open voice call mode(OVCM) 
Bit[2] 
0:Non_OVCM call 
1:OVCM call 
Priority level 
Bit[1:0] 
00: NO Priority 
01: Priority 1 
10: Priority 2 
11: Priority 3 
Note: Priority 3 is the highest Priority 
Table 1-162 Service Option Settings 
1.2.76 DMR_CC 
This message set the color code index for DMR calls 
 
Field Identifier
CC 
1 Byte 
1 Byte 
0x077 
0: CC0 is used 
1: CC1 is used 
… 
15: CC15 is used
 
Table 1-163 DMR_CC Field Format 
1.2.77 DMR_CALL_START 
This command is used to start a call. Upon receiving this command, CT3258 begins to send call to 
the far end. 
 
Field Identifier
1 Byte 
0x078 
Table 1-164 DMR_CALL_START Field Format 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
82
1.2.78 DMR_CALL_OPTION 
This field is used to set the DMR specific call options 
 
Field Identifier 
 DMR Call Options 
1 Byte 
5 Bytes 
0x79 
Data[0]: 
Bit 7: unused slot fill pattern 
0: unused slot filled with 0 
1: unused slot filled with random bits. 
Bit 6: SQ detection enable 
  0: SQ detection is not done by CT3258 
  1: SQ detection is done by CT3258 
Bit 5: IQ receive enable 
  1: CT3258 in IF IQ mode 
  0: CT3258 in base band mode 
Bit 4: RF control enable 
  0: CT3258 does not control RF chip (SCT3700 or 
RDA 1847) 
  1: CT3258 controls RF chip. 
Bit 3: RF slot timing control (SCT3700 Only) 
  0: No control of SCT3700 TX signal during 
transmission 
  1: Turn on and off SCT3700 TX signal aligned with 
the base band slot timing. 
Bit 2: RF_TIMING RX mode enable 
0: RF_TIMING port outputs slot timing information in 
TX mode only 
1: RF_TIMING port outputs slot timing information in 
TX mode and RX mode 
Bit 1-0: Traffic mode 
  0: DMR continuous transmission mode 
  1: DMR direct mode with no reverse channel 
  2: DMR direct mode with reverse channel 
 
Data[1]: voice delay constant and IQ transmit mode 
Bit 7: IQ transmit enable 
1: CT3258 transmitting in IQ mode 
0: CT3258 transmitting in base band mode 
Bit 6: Reserved 
Bit 5:0: voice delay constant   
0-40:  voice delay constant in steps of 40 milliseconds 
  Others: reserved 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
83
 
Data[2]:  
Bit 7-4: Number of good CACH received before 
reporting DMR_SLOT_FOUND with the slot verified 
flag set. 
Bit 3-0: Number of repeated LC header 
 
Data[3]: 
Bit 7-6: Reserved 
Bit 5-0: Bit mask for reporting repeated identical 
messages. 
  Bit 4: 0, report identical SLC once 
       1, report every SLC 
  Bit 3: 0: Report identical IDLE data frames once 
       1: Report all IDLE data frames 
  Bit 2: 0: Report identical CSBK data frames once 
       1: Report all CSBK data frames 
  Bit 1: 0: Report identical LC headers once 
       1: Report all LC headers 
Bit 0: 0: Report identical LC terminators once 
       1: Report all LC terminators 
Data[4]: Reserved 
 
Default 
0 
 
Table 1-165 DMR_CALL_OPTION Field Format 
1.2.79 DMR_OFFSET 
This command set the timing offset of the RF_TIMING signal to the internal slot timing signal, 
which is aligned with base station timing. With default parameters, the RF_TIMING signal is 
identical to the internal slot timing signal, which has a 60 millisecond period and 50% duty cycle, 
with the rising edge aligned with the end of a BS slot. With DMR_OFFSET command, the 
RF_TIMING signal can be ahead or lag of the internal slot timing signals.  
 
Field Identifier 
Offset 
Length 
1 Byte 
2 Bytes  
2 Bytes 
0x07A 
16 bit signed integer, 
MSB first. The unit is 
41.7 microseconds. 
The range is -720 to 
720, or -30 
milliseconds to +30 
16 bit unsigned 
integer, MSB first. 
The unit is 41.7 
microseconds. The 
range is 240 to 
1200, or 10 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
84
milliseconds 
milliseconds to 50 
milliseconds 
Default 
0 
720 
Table 1-166 DMR_OFFSET Field Format 
 
1.2.80 DMR_SLOT_TYPE 
This field is used report the slot type when a call is received. 
Slot Type 
Colour Code 
Data Type 
1 BYTE 
BIT[7:4] 
BIT[3:0] 
0x7B 
Value:0-15 
0000:PI header 
0001:Voice LC header 
0010:Terminatior with LC 
0011:CSBK 
0100:MBC header 
0101:MBC continuation 
0110:data header 
0111:rate 1/2 data 
1000:rate 3/4 data 
1001:idle 
1010:Rate1 Data 
Others:Reserved for future use 
Table 1-167 DMR_SLOT_TYPE Field Format 
 
1.2.81 DMR_EMB 
This field is used report the EMB field when a call is received. 
 
DMR_EMB 
Colour Code 
PI 
LCSS 
Rev 
1 BYTE 
BIT[7:4] 
BIT[3] 
BIT[2:1] 
BIT[0] 
0x7C 
Value:0-15 
Reserved
00:Single fragment LC or first fragment 
CSBK signalling  
01:First fragment of LC signalling 
10:Last fragment of LC or CSBK 
signaling 
11:Continuation fragment of LC or 
CSBK 
Reserved 
Table 1-168 DMR_EMB Field Format 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
85
1.2.82 DMR_CALLED_ID_BCD 
This field contains the called ID in 8 BCD codes. 
 
Field Identifier
 Called ID in 7 BCD codes
1 Byte 
4 Bytes 
0x7D 
DATA[0]= {K1, K2} 
DATA[1]= {K3, K4} 
DATA[2]= {K5, K6} 
DATA[3]= {K7, K8} 
Default 
0xaa,0xaa,0xaa,0xaa 
Table 1-169 DMR_CALLED_ID_BCD Field Format 
 
K1 should be either 0 or 1. An 8 digit BCD should not exceed “16777016”. If the user wishes to 
dial a 7 digit BCD number “1234567”, he/she should fill the K1-K8 as “01234567”. 
1.2.83 DMR_OWN_ID_BCD 
This field contains the own ID in 8 BCD codes. 
 
Field Identifier
 Own ID in 7 BCD codes
1 Byte 
4 Bytes 
0x7E 
DATA[0]= {K1, K2} 
DATA[1]= {K3, K4} 
DATA[2]= {K5, K6} 
DATA[3]= {K7, K8} 
Default 
0x00,0x00,0x00,0x00 
Table 1-170 DMR_OWN_ID_BCD Field Format 
 
1.2.84 DMR_SLOT_FOUND 
This field is used by CT3258 to inform the MCU that synchronization with the far end BS or MS 
is achieved and CACH is decoded. 
 
DMR_SLOT FOUND 
Slot Found Details 
1 BYTE 
1 Byte 
0x7F 
Details in the table below 
Table 1-171 DMR_SLOT_FOUND Field Format 
 
Bit Position 
Bit Name 
Bit Descriptions 
7 
Sync Type
MS Sync or BS Sync 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
86
0: MS Sync 
1: BS Sync 
6 
Slot Verify
Slot verify flag 
0: Slot not verified 
1: Slot Verified 
5 
Slot invert
Slot invert flag 
0: slot not inverted from last report 
1: slot inverted from last report 
4 
Reserved 
Reversed 
3 
AT 
Access Type 
0:inbound channel is idle 
1:inbound channel is busy 
note:in continuous transmission mode, for 
both voice and data,the AT bit is set to 1; 
2 
TC 
TDMA Channel selection 
0:Following outbound burst is channel 1 
1:Following outbound burst is channel 2 
1:0 
LCSS/TD
MA SLOT
When BS SYNC is found (bit 7 = 1), 
These two bits indicate LCSS 
00:Single fragment LC or first fragment 
CSBK signalling see note 
01:First fragment of LC signalling 
10:Last fragment of LC or CSBK signaling 
11:Continuation fragment of LC or CSBK 
Signaling 
When MS SYNC is found (bit 7 = 0), this two 
bit indicates the types of MS SYNC found 
0: no TDMA direct SYNC 
1: TDMA SYNC 1 found 
2: TDMA SYNC 2 found  
Table 1-172 Slot Found Details 
 
This field is used only by CT3258 to report the CACH information when BS SYNC is found, or 
types of MS SYNC if MS SYNC is found. Identical CACH are not reported to reduce the traffic 
between CT3258 and the MCU (after CACH is verified). A CACH verify scheme is used in 
reporting DMR_SLOT_FOUND.  Bit 7-4 of Byte 2 of DMR_CALL_OPTION command 
specifies the number of good CACH received before reporting DMR_SLOT_FOUND with the 
slot verified flag set. Before the number of good CACH has reached the specified limit, CT3258 
reports every CACH that is found, without setting the slot verified flag. When the specified limit 
is reached, CT3258 reports the last CACH with the slot verified flag set. If the slot number of the 
last reported CACH matches the previously reported CACH, it indicates that no slot inversion is 
needed. If the slot number of the last reported CACH does not match the previously reported 
CACH, it indicates that slot inversion is needed. In this case, the user should treat all previous 
report CACH as if the slot number is inverted (1 as 2, and 2 as 1).
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
87
 
2 Application Guides 
2.1 Code Downloading 
After CT3258 reset, it first down loads a boot loader from the MCU through the HPI and then 
execute the boot loader. The boot loader then loads the rest of the application from the embedded 
flash and start execution. 
2.1.1 Boot loader Downloading 
The boot loader is a program with fixed 1024 words. It is downloaded to CT3258 after CT3258 
reset.  
 
After the initial reset, CT3258 enters into boot loading mode. In boot loading mode, CT3258 is 
automatically configured after reset to load a 1024-word block of instructions from the HPI port. 
CT3258 then begins executing that instruction block immediately.  
 
 
The HPI port is configured as 16-bit mode, low-byte first, and either Intel mode or Motorola mode. 
PIO1 is sampled and used to select either Intel (LOW input) or Motorola (HIGH input). 
 
The host must download exact 1024 words for this boot process to work.   
 
Note that the boot loader for DPMR mode and DMR mode is different. Depending on the boot 
loader types, CT3258 enters DPMR mode or DMR mode. In DPMR mode, commands for DMR 
only (type 5) are not recognized. In DMR mode, command for DPMR only (type 3) are not 
recognized. 
2.1.2 Application Downloading 
After the boot loader is downloaded to CT3258 and executed, CT3258 reads the application 
firmware in the embedded flash and start execution. 
2.2 DPMR Call Processing 
CT3258 support two ways of processing digital calls: Easy Mode (layer 3), DPMR Layer 2 Mode 
(layer 2).  
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
88
2.2.1 Easy Mode 
The Easy Mode is for users who don’t have the in-depth understanding the DPMR protocol. MCU 
uses simple CALL_START, CALL_STOP, CONNECT, DISCONNECT messages to start, stop a 
voice calls, or initiate or disconnect a data calls. Internally, CT3258 handles all call processing 
according the DPMR Protocol . 
 
With Easy Mode, in addition to layer two processing, the CT3258 also performs call control of the 
DPMR processing. “ANNEX A” Standard User Interface for CSF radio are implemented in 
CT3258. At the transmitter, CT3258 supports wild character dialing, abbreviated dialing and 
masked dialing. At the receiver, when a call is received, CT3258 matches incoming called number 
with its own individual call number and group number and informs the MCU of matching results.  
 
With Easy Mode, CT3258 strictly complies with the DPMR protocol (ETSI TS 102 490 or 658). 
The ability to change any aspect of the protocol is disabled. 
 
The process mode can be set or changed with PROCESS_MODE command. For Easy Mode, 
Mode 3 is selected with PROCESS_MODE command. 
2.2.1.1 Transmitting 
In Easy Mode, the MCU passes called ID and own ID to CT3258. CT3258 saves this information 
in the internal registers. Upon receiving a CALL_START packet, it formatted the information 
according to the DPMR protocol and send to the far end. 
 
For example, a voice can be started with the following packet.  
 
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
DPMR_CALLED_ID 
DPMR_OWN_ID 
CALL_START 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-1 Example Packet For Starting a Voice Call in Easy Mode 
 
If a field has been sent from the MCU to CT3258 before, and does not change in the next packet, 
this field can be omitted from the packet. For example, to redial a previous dial number, the MCU 
only needs to send the following packet to CT3258 
 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
89
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
CALL_START 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-2 Example of Redial Packet 
 
The call can be ended with a packet with CALL_STOP field. 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
CALL_STOP 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-3 Example of Call Stop Packet 
2.2.1.2 Receiving 
Upon receiving a call from the far end, CT3258 extracts useful information according to the 
DPMR protocol and reports to the MCU.  
 
The example below shows the packet sent to the MCU after receiving a new header frame. 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
CALL_HT_CI 
DPMR_CALLED_ID 
DPMR_OWN_ID 
DPMR_M_V_F_E 
DPMR_CC 
CALL_MATCH 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-4 Example of Packet from DSP after Receiving a Call 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
90
The type of FIELD to report can be changed with REPORT_FIELD command. 
 
The fields can be sent in one packet or in multiple packets. 
 
2.2.2 DPMR Layer 2 Mode 
With DPMR Layer 2 Mode, CT3258 support DPMR up to layer 2 the does not handle the call 
processing layer of the DPMR protocol. All call processing supports are provided by external 
MCU. In this case, CT3258 just performs the tasks of transporting DPMR related messages 
between the MCU’s of the two terminals. As a result, the following process will be performed by 
the MCU: 
 
Air Interface Call Control Layer (Layer 3) 
 
1. Establishing, maintaining and termination of calls 
2. Individual or group call transmission and receptions 
3. Destination addressing 
4. Automatic matching of Called ID of incoming call to own ID and group ID 
 
As comparison, these processes are completed by CT3258 with Easy Mode. 
 
With DPMR Layer 2 Mode, the MCU can access primitive elements of the DPMR architecture. 
For example, to start a call, the MCU send individual elements in the protocol to CT3258, with 
DPMR_SEND_HEADER and DPMR_SEND_SF, whereas in easy mode, the user sends a simple 
CALL_START to CT3258. 
 
With easy mode, the user also has the ability to change synchronization pattern with DPMR_FS1, 
DPMR_FS2, DPMR_FS3 and DPMR_FS4.  
2.2.2.1 Transmitting 
 
In DPMR Layer 2 Mode, the MCU pass un-encoded HT, END and CCH frames, or individual 
information elements such as Called_ID or Own_ID to CT3258. CT3258 saves this information in 
the internal registers. Upon receiving a DPMR Packet with DPMR_SEND_HEADER, 
DPMR_SEND_END or DPMR_SEND_SF, the MCU performs channel coding and interleaving, 
forms the complete HI, END and Super Frame structure, and send to the far end. 
 
For example, upon receiving the DPMR Packet below, CT3258 builds a CCH0 to CCH3 structure. 
 
 
 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
91
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
DPMR_CCH_UE (0) 
DPMR_CCH_UE (1) 
DPMR_CCH_UE (2) 
DPMR_CCH_UE (3) 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-5 Example 1 of a Packet from MCU in DPMR Layer 2 Mode 
 
 
Then if the MCU send a packet with DPMR_SEND_SF, it forms a super frame with the saved 
information, and sends it to the far end. 
 
Similarly the host message to build a HI frame and END frame can be like the one below: 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
DPMR_HI_UE 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-6 Example of a HI Packet from MCU 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
DPMR_END_UE 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-7 Example of END Packet from MCU 
2.2.2.2 Receiving 
Upon receiving a Super Frame, Header Frame or an End Frame, CT3258 extracts the CCH0 – 
CCH3, HI or END fields, performs de-interleaving and channel decoding on the frames. CT3258 
extracts individual elements to the MCU. 
 
The example below shows the packet sent to the MCU after receiving a new header frame. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
92
Packet Header 
START_BYTES 
LENGTH 
TYPE 
Fields 
DPMR_CALLED_ID 
DPMR_OWN_ID 
DPMR_M_F 
DPMR_HT_CI_PM 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-8 Example of Packet from DSP after Receiving a Header Frame 
2.3 DMR Call Processing 
CT3258 support two ways of processing digital calls: Easy Mode (Layer 3 Mode), DMR Layer 2 
Mode.  
 
In Easy Mode (Layer 3 Mode), CT3258 digital mode support layer 1-3 processing of the DMR 
protocol complied with ETSI TS 102 361. The MCU uses simple DMR_CALL_START, 
CALL_STOP messages to start, stop a voice calls.  
 
In Layer 2 Mode, CT3258 implements Layer 1 and Layer 2 of the DMR protocol, complied with 
ETSI TS 102 361. Layer 3 and above are implemented on the MCU. The interface between 
CT3258 and the MCU are based on Layer 2 and Layer 3 interface.  
 
Note that if SCT3700 supported is enabled, only Layer 2 Mode is supported. 
2.3.1 DMR Easy Mode 
In Easy Mode (Layer 3 Mode), the MCU uses simple DMR_CALL_START, CALL_STOP 
messages to start, stop a voice calls. Internally, CT3258 handles all call processing according the 
DMR Protocol. “ANNEX C of TS 102 361” numbering plan is implemented in CT3258. At the 
transmitter, CT3258 supports individual call and group call dialing. At the receiver, when a call is 
received, CT3258 matches incoming called number with its own individual call number and group 
number and informs the MCU of matching results.  
2.3.2 DMR Layer 2 Mode 
In DMR Layer 2 Mode, CT3258 interacts with the control processor (the MCU) to complete the 
DMR voice and data calls. The layer 1 and layer 2 of the DMR are implemented in CT3258, while 
layer 3 and above are implemented in the MCU. The information exchange between the MCU and 
CT3258 is through DIGC_DATA_FRAME commands or indications. The MCU passes the data 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
93
types and the payload information the CT3258 through DIGC_DATA_FRAME to CT3258. 
CT3258 performs FEC according to the data types, CT3258 adds FEC, formulates them into 30 
ms data burst and adds 4FSK modulation before sending to the far end. At the receiver, CT3258 
decode the received data burst, and report to the MCU through DIGC_DATA_FRAME 
indications.  
 
In DMR Layer 2 mode, care must be taken to make sure that the DIGC_DATA_FRAME messages 
are sent no more and no less than 60 millisecond at a time. Examples of layer 2-3 message 
exchange are described in the example session below. 
 
Two types of commands are used by the MCU to control CT3258. The first type is hardware 
related for configuring CT3258 in certain mode ready for communication. The second type is 
protocol related, where commands are used to pass layer 2 and layer 3 information. In particular 
DIGC_DATA_FRAME command is used to start or stop a voice or data call. 
 
2.3.3 DMR MS Call Flow 
The diagram below shows at typical DMR voice call from one mobile station to another mobile 
station without a repeater. 
 
MCU
MS1 Transmiter
MS2 Receiver
3928
3928
MCU
call up
data frame
(LC Header)
response
data frame
(LC Header)
data frame
(surperframe)
response
Voice call
data frame
(surperframe)
LC header
Super Frame
next
.....
call Down
data frame
(LC Terminal)
response
data frame
(LC Terminal)
LC Terminal
 Figure 2-1 DMR MS Call Flow 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
94
 
The MCU informs CT3258 the types of data frame to send through command 
DMR_DATA_FRAME and then waits for response from CT3258. CT3258 put the data frame for 
transmission and sends a response in the form of (0x17 0x0a). The next DMR_DATA_FRAME 
won’t be sent unless a response (0x17 0x0A) is received. The interval between two 
DMR_DATA_FRMAE is around 60 milliseconds.  
 
Only one DMR_DATA_FRAME command with LC contents is needed to start the voice 
communication at the TX side. The subsequent super frames use the same LC contents. Similarly, 
DMR_DATA_FRAME is only reported once upon receiving super frames at the RX side. The 
MCU knows the call end condition from either by receiving a terminal frame, or by receiving 
CT3258 response of 1B 08. 
2.3.4 Base Station Activation 
In order to place voice or data calls through the base station or repeater, the mobile station should 
first acquire synchronization by monitor signals from the base station. If the base station is in idle 
state, the mobile station should first send a base station activation message to activate the base 
station. This is done by MCU sending a DMR_DATE_FRAME with CSBK contents. The diagram 
below shows the base station activation procedure. 
 
MCU
MS Transmiter
BS UpLink
3928
call up
data frame
(CSBK)
response
CSBK
BS Down link Actived
MS Receiver
 
Figure 2-2 Base Station Activation 
2.3.5 Listen Before Transmitting 
If the base station is activated, it constantly broadcasts base station signals. The mobile station 
should first acquire timing synchronization from the base station before it can start or receive a 
call. Timing synchronization is done by monitoring the SYNC pattern and the CACH signals from 
the base station.  
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
95
The MCU on the mobile station first sends command DMR_CALL_SLOT to inform CT3258 
which slot to monitor, and waits CT3258 for DMR_SLOT_FOUND response. As soon as CT3258 
acquire synchronization, it sends DMR_SLOT_FOUND response, first with slot verified flag 
unset, then after the preset number of CACH is received, with the slot verified flag set. At this 
point, the mobile station is aligned with the base station. CT3258 can report any data frames from 
the 
far 
end 
through 
DMR_DATA_FRAME 
message. 
The 
MCU 
can 
also 
issue 
DMR_DATA_FRAME command to CT3258 to send to the far end.  
 
The diagram below shows a timing acquisition process. 
slot 2
slot 1
c
a
c
h
BS Down Link
MS Receive
c
a
c
h
slot 2
slot 1
c
a
c
h
c
a
c
h
slot 2
slot 1
c
a
c
h
SLOT FOUND
c
a
c
h
Receive
Transmit
Receive
Receive
RF_TIMING
PORT
RF Ttransmit Control
(MCU Generate)
Close
Open
Close
Open
Close
Open
MS Ttransmit
slot 1
(Invalid)
slot 2
(valid)
slot 1
(Invalid)
slot 2
(valid)
slot 1
(Invalid)
slot 2
(valid)
Offset
Transmit
Transmit
SLOT_TIMING
(SCT3928 Internal)
Slot 1
Slot 2
Slot 1
Slot 2
Slot 1
Slot 2
SLOT FOUND
Done
 Figure 2-3 Signal Timing Relationship 
 
After CT3258 acquires synchronization from the base station, it generates an internal 60 
millisecond cyclic timing signal, SLOT_TIMING. In the TX mode, CT3258 controls the timing on 
the modulation output port so that it is in synchronization with the base station timing. In the 
meantime, it also outputs a SLOT_TIMING signal through the RF_TIMING port to control the 
RF circuit. The RF_TIMING signal can be identical to the SLOT_TIMNG. It can also be ahead or 
lag the SLOT_TIMING signal. The offset are programmable through command DMR_OFFSET. 
The MCU can then generate necessary timing signals to control the RF transceiver and the power 
amplifier. In the case of SCT3700, the switching of RF transceiver and controlled by the CT3258. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
96
 
2.4 Typical Call Sessions with CT3258 in DPMR Mode 
2.4.1 Digital Voice Call 
A voice call involves the transmitter and the receiver. In both side, the MCU is the main controller, 
controlling the RF circuit, the MMI and CT3258. Before the call, the MCU should set the RF 
circuit in TX mode for the transmitter and in RX mode for the receiver.  The sub-section below 
only describes the interaction between the MCU and CT3258. 
2.4.1.1 Initial Setting for both the Transmitter and the Receiver 
1. Set Vocoder type with VOCODER_SEL 
2. Set CT3258 to Easy mode with PROCESS_MODE command 
3. Set Color Code corresponding to the RF Channel with DPMR_CC command 
4. Set addressing mode to either “Initial Address Mode” or “Configured Addressing Mode” with 
ADDRESS_MODE command 
5. Set Own ID with DIGC_OWN_ID_BIN or DPMR_OWN_ID_BCD (“Configured Addressing 
Mode” only) 
2.4.1.2 Initial Setting for the Receiver 
1. Set the demodulator gain with DEMOD_GAIN command 
2. Set the types of field to report when receiving a call with REPORT_FIELD command 
2.4.1.3 Initial Setting for the Transmitter 
1. Set the modulator gain with MOD_GAIN command 
2.4.1.4 Transmitter Side, Start a Call 
1. Set CT3258 in TX or DUPLEX with WORK_MODE command 
2. Set called ID and own ID with DPMR_CALLED_ID and DPMR_OWN_ID 
3. Start the call with CALL_START, for peer-to-peer voice call 
2.4.1.5 Receiver Side, Start a Call 
1. Set CT3258 in RX or DUPLEX with WORK_MODE command 
2. When detecting carrier, inform CT3258 that carrier is ready with CARRIER_READY 
command 
 
After the call from transmitter arrives, CT3258 reports useful information. The MCU decides 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
97
whether to accept or discard the call.  
2.4.1.6 Transmitter Side, End a Call 
1. Drop the call with CALL_STOP command 
2. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
2.4.1.7 Receiver Side, End a Call 
1. Drop the carrier with CARRIER_READY command 
2.4.2 Voice Call with Slow Data 
1. Start the call the same way as voice only call described in the previous section except that  
the communication mode(the M in M_V_F_EP) is set to Call with Slow Data 
2. After the calls start, the MCU first send a packet with DPMR_SLD field.  
3. When CT3258 begin transmitting, it fills slow data in the super frame and transmits slow data 
along with the voice frames. As soon as the slow data is being transmitted, it sends a 
DPMR_SLD response packet to the MCU, at 80 millisecond interval. 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE (Read Near End) 
Fields 
DPMR_SLD 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-9 Example Packet for Request Near End Slow Data 
 
4. Upon receiving DPMR_SLD response, the MCU write DPMR_SLD to CT3258, also at 80 
millisecond interval. 
5. At the receiver, upon receiving super frame with SLOW data, CT3258 extract slow data and 
report to the MCU with DPMR_SLD packet at 80 millisecond interval. 
6. When all data has been transmitted, the MCU has to wait the response packet of the last frame 
DPMR_SLD. 
7. Drop the call with CALL_STOP command 
8. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
2.4.3 Voice Call Recording 
1. Enable voice recording function with command VOCODER_IO_SET at the transmitter for 
near end voice call recording (IO_SET = 0x20), or at the receiver for far end voice call 
recording (IO_SET = 0x04) 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
98
2. Start the call the same way as voice only call described in the previous section. 
3. When the call starts, CT3258 start to send encoded voice data with CHAN_D field, at 80 
millisecond interval. 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE (Read Near End) 
Fields 
CHAN_D 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-10 Example Packet for Voice Recoding 
4. Upon receiving CHAN_D, the MCU should process the message and save its contents. The 
MCU does not send a response to CHAN_D.  
5. The process repeats at 80 millisecond interval. 
6. Drop the call with CALL_STOP command 
7. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
8. Disable the voice recording by setting IO_SET = 0x00 
2.4.4 Voice Call Play Back 
1. Enable voice play back function with command VOCODER_IO_SET at the transmitter for far 
end voice play back (IO_SET = 0x40), or at the receiver for near end voice play back 
(IO_SET = 0x08) 
2. Start the call the same way as voice only call described in the previous section. 
3. When the call starts, MCU starts to send encoded voice data with CHAN_D field, at 80 
millisecond interval. 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE (Read Near End) 
Fields 
CHAN_D 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-11 Example Packet for Play Back 
 
4. Upon receiving CHAN_D, CT3258 send back the response to CHAN_D.  
5. The process repeats at 80 millisecond interval. 
6. Drop the call with CALL_STOP command 
7. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
8. Disable the voice recording by setting IO_SET = 0x00 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
99
2.4.5 Data Call with Type 1 or Type 2 Data 
 
1. Start the call the same way as voice only call described in the previous section except that  
the communication mode (the M in M_V_F_EP) is set to Type 1 or Type 2 data call. The 
DPMR_HT_CI has to be configured as section 1.2.53. 
2. After the calls start, the MCU first send a packet with DIGC_DATA_FRAME field, which 
includes up to 36 bytes (in 80 ms) of data. In the DIGC_DATA_FRAME fields, user should 
also indicate whether valid data are present and the length of the valid data. The user should 
also indicate whether this is the last data frame. 
3. When CT3258 begin transmitting, it fills data in the TCH frame and starts transmitting data. 
As soon as data is being transmitted, it sends a DIGC_DATA_FRAME response packet to the 
MCU, at 80 millisecond interval. 
 
Packet Header 
START_BYTES 
LENGTH 
TYPE (Read Near End) 
Fields 
DIGC_DATA_FRAME 
Parity  
FBYTE 
PARITY_BYTE 
Table 2-12 Example Packet for Request Near End Type 1 and Type 2 Data 
 
4. Upon receiving DPMR_DTAT_FRAME response, the MCU write DIGC_DATA_FRAME 
with more data to CT3258, also at 80 millisecond interval. 
5. At the receiver, upon receiving DPMR pay load, CT3258 extracts data from TCH frames and 
report to the MCU with DIGC_DATA_FRAME packet at 80 millisecond interval. 
6. When all data has been transmitted, the MCU responds to data query with 
DIGC_DATA_FRAME with indication that no more data is to transmit. 
7. Drop the call with CALL_STOP command 
8. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
2.4.6 Voice Call with Appended Data 
The Voice Call with Appended Data starts as voice call and ends as a Type 2 Data Call. 
1. Start the call the same way as voice only call described in the previous sections except that  
the communication mode(the M in M_V_F_EP) is set to Voice Call with Appended Data. The 
DPMR_HT_CI has to be configured as section 1.2.53. 
2. Proceed to voice communication as a normal voice call 
3. When the user releases the PTT, the MCU first send a packet with DIGC_DATA_FRAME 
field, which includes up to 36 bytes (in 80 ms) of data. In the DIGC_DATA_FRAME fields, 
user should also indicate whether valid data are present and the length of the valid data. The 
user should also indicate whether this is the last data frame. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
100
4. When CT3258 begin transmitting, it fills data in the TCH frame and starts transmitting data. 
As soon as data is being transmitted, it sends a DIGC_DATA_FRAME response packet to the 
MCU, at 80 millisecond interval. 
 
5. Upon receiving DPMR_DTAT_FRAME response the MCU write DIGC_DATA_FRAME 
with more data to CT3258, also at 80 millisecond interval. 
6. At the receiver, upon receiving DPMR pay load, CT3258 extracts data from TCH frames and 
report to the MCU with DIGC_DATA_FRAME packet at 80 millisecond interval. 
7. When all data has been transmitted, the MCU responds to data query with 
DIGC_DATA_FRAME with indication that no more data is to transmit. 
8. Drop the call with CALL_STOP command 
9. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
2.4.7 Data Call Type 3 (for future release) 
Type 3 Data calls involve a call set up and disconnect procedure as described below: 
 
1. Station A: Send connection request 
2. Station B: Send ACK 
3. Station A: Send data frames 
4. Station B: Send ACK 
5. Station A: Send more data frames 
6. Station B: Send ACK 
 
… 
7. Station A: Send Disconnect request 
 
The interactions of MCU and CT3258 to complete a data call are described below. 
2.4.7.1 Initialization of Data Call Type 3 
The initialization of Type3 data call is the same as voice calls. 
2.4.7.2 Connection Request 
1. Set Station A in TX mode and Station B in RX mode with WORK_MODE command 
2. Set call information (CI) for appropriate data format with DPMR_CI_PM command 
3. Send CONNECT command in station A 
4. Set Carrier Ready in station B 
5. CT3258 in station B report HT_CI to station B MCU 
6. Station B MCU becomes aware of a data call request, and get ready to send an ACK 
7. When the CONNECT message is sent out in station A, CT3258 responds with 
ACK_MESSAGE (10) 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
101
2.4.7.3 Connection Acknowledge 
1. Set Station B in TX mode and Station A in RX mode with WORK_MODE command 
2. Set CI to indicate ACK or NACK (with NACK reason) with DPMR_CI_PM. 
3. Send DPMR_ACK command in station B 
4. Set Carrier Ready in station A 
5. CT3258 in station A report HT_CI to the MCU 
6. Station A MCU becomes aware of the acknowledgement from station B, and get ready to send 
data. 
7. When the Connect Acknowledgement message is sent out in station B, CT3258 responds with 
ACK_MESSAGE (10) 
2.4.7.4 Sending Type 3 Data Frames 
1. Set Station A in TX mode and Station B in RX mode with WORK_MODE command 
2. Set CI for appropriate data format with DPMR_CI_PM command  
3. Start the call with CALL_START 
4. After the calls start, the MCU first send a packet with DIGC_DATA_FRAME field with Type 
3 data indication, which includes up to 48 bytes (in 80 ms) of data. In the 
DIGC_DATA_FRAME fields, user should also indicate whether valid data are present and the 
length of the valid data. The user should also indicate whether this is the last data frame. 
5. CT3258 fills data in the data frame and start transmission. As soon as data is being transmitted, 
it sends a DIGC_DATA_FRAME query packet to the MCU to request for more data. This 
process continues at 80 milli-second interval. 
6. Upon receiving DIGC_DATA_FRAME query, the MCU write DIGC_DATA_FRAME to 
CT3258, also at 80 millisecond interval. 
7. At station B, upon receiving data frames, CT3258 extract data and report to the MCU with 
DIGC_DATA_FRAME packet at 80 millisecond interval. 
8. Station B MCU assembles the data frames from the DIGC_DATA_FRAME fields. 
9. When all data in current data frame has been transmitted, the MCU responds to data query 
with DIGC_DATA_FRAME with indication that no more data is to transmit. 
10. Drop the call with CALL_STOP command 
11. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
2.4.7.5 Data Acknowledgement 
1. Set Station B in TX mode and Station A in RX mode with WORK_MODE command 
2. Set CI to indicate ACK or NACK (with NACK reason) with DPMR_CI_PM. 
3. Send DPMR_ACK command in station B 
4. Set Carrier Ready in station A 
5. CT3258 in station A report HT_CI to the MCU 
6. Station A MCU becomes aware of the acknowledgement from station B, and get ready to send 
more data packet. 
7. When the Data Acknowledgement message is sent out in station B, CT3258 responds with 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
102
ACK_MESSAGE (0x17 0x0A) to MCU B. 
2.4.7.6 Disconnect 
1. Set Station A in TX mode and Station B in RX mode with WORK_MODE command 
2. Send DISCONNECT command in station A. 
3. Set Carrier Ready in station B 
4. CT3258 in station B report HT_CI to the MCU 
5. Station B MCU becomes aware of the Disconnect request from station A, and start disconnect 
procedure 
6. Station B disconnect the cal 
7. When the DISCONNECT message is sent out in station A, CT3258 responds with 
ACK_MESSAGE (0x17 0x0A) 
2.4.8 Short Appended Data (TS 102 658 Only) 
ETSI TS 102 658 defines a special message for transmitting short data. It is constructed by a 
connection request HEADER frame, one to four appended data frames, and an END frame. To 
send Short Appended Data, the MCU can follow the procedure below. 
2.4.8.1 Send Short Appended Data 
Set Station A in TX mode with WORK_MODE command 
1. Set call information (CI) for appropriate data format with DPMR_CI_PM command 
2. Send the contents of the short appended data with DIGC_DATA_FRAME command with type 
set to Short Appended Data. 
3. Send SEND_AD command in station A 
4. When the CONNECT message is sent out in station A, CT3258 responds with 
ACK_MESSAGE (10) 
5. The MCU set Station A in RX mode to get ready to receive an ACK. 
2.4.8.2 Receive Short Appended Data 
1. Set Station B in RX mode with WORK_MODE command  
2. Set Carrier Ready in station B 
3. CT3258 in station B receives short appended data and report to station B MCU with 
DIGC_DATA_FRAME 
4. Set Station B in TX mode to get ready to send an ACK. 
2.4.9 Analog Voice Call in DPMR Mode 
CT3258 support dual mode operation with digital and analog calls. For analog call, CT3258 
supports CTCSS/DCS sub-audio signals. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
103
2.4.9.1 Receiver Side, Start a Call 
1. Set CT3258 to analog call mode with PROCESS_MODE command 
2. Set CT3258 in RX or DUPLEX with WORK_MODE command  
3. Set CTCSS/DCS settings with SUB_AUDIO command 
4. When detecting carrier, inform CT3258 that carrier is ready with CARRIER_READY 
 
After the call from transmitter arrives, CT3258 reports whether CTCSS/DCS is matched or not 
with SUB_AUDIO command. 
2.4.9.2 Transmitter Side, Start a Call 
1. Set CT3258 to analog call mode with PROCESS_MODE command 
2. Set CT3258 in TX or DUPLEX with WORK_MODE command 
3. Set CTCSS/DCS settings with SUB_AUDIO command 
4. Start the call with CALL_START command 
2.4.9.3 Receiver Side, End a Call 
1. Drop the carrier with CARRIER_READY command 
2.4.9.4 Transmitter Side, End a Call 
1. Drop the call with CALL_STOP command 
2.4.10 Handling of Maintenance Message (TS 102 658 Only) 
With ETSI TS 102 658, the BS may send multiple maintenance messages such as preservation 
messages, Idle messages or Guard messages. CT3258 may report each occurrence of these 
messages, or elect to only report the same message once to save traffic between CT3258 and the 
MCU. The election is controlled by command DPMR_PROTOCOL_OPTION. 
2.4.11 Automatic Analog and DPMR Call Detection 
To set up for automatic analog and DPMR call detection, the receiver is set up the same ways as a 
digital calls, with the following exceptions: 
 
1. Set CT3258 to Easy mode with PROCESS_MODE command, with mixed call bit enabled: i. 
e., the process mode as 131. 
2. Set CTCSS/DCS settings with SUB_AUDIO command 
 
The transmitter side is set up exactly as normal analog or DPMR call.  
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
104
With automatic analog and DPMR call detection, CT3258 monitors the RF channel, and 
simultaneously detects FS1/FS2 pattern for DPMR calls, and CTCSS/DCS signaling for analog 
calls. If DPMR call is found, it sends CALL_MATCH message (even if the called ID or CC code 
does not match). If CTCSSS/DCS signaling is found, it send SUB_AUDIO message. 
2.4.12 Audio Muting for Un-matched Calls 
By defaults, CT3258 enables audio as soon as a DPMR or an analog call is received, even if called 
ID or CTCSS/DCS code does not match. It is up to the MCU to decide whether to take the call or 
not. If the MCU decides to take to call, it enables audio PA. If not, it turns off the audio PA, and 
send carrier lost to CT3258. 
 
Optionally, the CT3258 can mute the audio until a correct call match is achieved. This can be done 
by setting Mute Flag when sending the Carrier Ready command at the receiver. When Mute Flag 
is set, CT3258 sends zeros to its audio out line until a called ID of the incoming call matches the 
own ID of itself, or the CTCSS/DCS code of the transmitter and receiver match. 
2.5 Typical Call Sessions with CT3258 in DMR Mode 
2.5.1 DMR Voice Call in DMR Easy Mode 
A voice call involves the transmitter and the receiver. In both side, the MCU is the main controller, 
controlling the RF circuit, the MMI and CT3258. Before the call, the MCU should set the RF 
circuit in TX mode for the transmitter, and in RX mode for the receiver.  The sections below only 
describe the interaction between the MCU and CT3258. 
 
Note that if SCT3700 support is enabled, DMR Easy mode is not supported. 
2.5.1.1 Initial Setting for both the Transmitter and the Receiver 
1.Set Vocoder type with VOCODER_SEL, 4 for AMBE+2 
Command ID: 
VOCODER_SEL 
Send Command: 84 A9 61 00 02 00 10 04 
Receive 
Data:84 A9 61 00 02 00 10 00 
 
2.Set CT3258 to digital mode with PROCESS_MODE command 
Command ID: 
PROCESS_MODE 
Send Command: 84 A9 61 00 02 00 1A 03 
Receive 
Data:84 A9 61 00 02 00 1A 00 
 
3.Set Color Code corresponding to the RF Channel with DMR_CC command 
Send Command: 84 A9 61 00 02 08 77 01 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
105
Receive 
Data:84 A9 61 00 02 08 77 00 
 
4.Configure the call option with DMR_CALL_OPTION 
Command ID: 
DMR_CALL_OPTION 
Send Command: 84 A9 61 00 06 08 79 41 00 00 00 00  
Receive 
Data:84 A9 61 00 02 08 79 00 
(In this particular command, CT3258 is set to do SQ detection; slotted mode is used, with unused 
slot filled with zeros; SLOT verified number is 1).  
 
5.Set Own ID with DIGC_OWN_ID_BIN or DMR_OWN_ID_BCD  
Command ID:  DIGC_OWN_ID_BIN 
Send Command: 84 A9 61 00 04 08 50 XX XX XX  
Receive 
Data:84 A9 61 00 02 08 50 00 
 
2.5.1.2 Initial Setting for the Receiver 
1. Set the demodulator gain with DEMOD_GAIN command 
2. Set the types of field to report when receiving a call with REPORT_FIELD command 
Command ID: REPORT_FIELD 
Send command: 84 A9 61 00 02 00 1D XX 
Receive Data: 84 A9 61 00 02 00 1D 00 
2.5.1.3 Initial Setting for the Transmitter 
1. Set the modulator gain with MOD_GAIN command 
2.5.1.4 Transmitter Side, Start a Call 
1.Set CT3258 in TX with WORK_MODE command 
Command ID: 
WORK_MODE 
Send Command: 84 A9 61 00 04 00 18 02 00 00 
Receive 
Data: 84 A9 61 00 02 00 18 00 
 
2.Set called ID and own ID with DIGC_CALLED_ID and DIGC_OWN_ID 
Command ID:  DIGC_OWN_ID_BIN 
Send Command: 84 A9 61 00 04 08 50 XX XX XX  
Receive 
Data: 84 A9 61 00 02 08 50 00 
 
Command ID: 
DMR_CALLED_ID_BIN 
Send Command: 84 A9 61 00 04 08 51 XX XX XX  
Receive 
Data: 84 A9 61 00 02 08 51 00 
 
3.Set FLC information 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
106
Command ID: 
DMR_FLC 
Send Command: 84 A9 61 00 04 08 76 00 00 00 
Receive 
Data:84 A9 61 00 02 08 76 00 
 
(In this particular command, FLCO as group call, FID is standard) 
 
4.Start the call with DMR_CALL_START, for peer-to-peer voice call 
Command ID: 
DMR_CALL_START 
Send Command: 84 A9 61 00 01 08 78 
receive command: 84 a9 61 00 02 08 78 00 
2.5.1.5 Receiver Side, Start a Call 
1.Set CT3258 in RX or DUPLEX with WORK_MODE command 
Command ID: 
WORK_MODE 
Send Command: 84 A9 61 00 04 00 18 01 00 00 
Receive 
Data:84 A9 61 00 02 00 18 00 
 
2.When detecting carrier, inform CT3258 that carrier is ready with CARRIER_READY command 
 
Send Command: 84 A9 61 00 02 00 19 {0x01 or 0x02} 
Receive 
Data:84 A9 61 00 02 00 19 00 
 
After the call from transmitter arrives, CT3258 reports useful information. The MCU decides 
whether to accept or discard the call.  
2.5.1.6 Receiver Side, after a Call is Received 
Receive Data:84 A9 61 00 02 30 7F 87 
 
DMR_SLOT_FOUND message. The content is TACT in the CACH, BS call, SLOT 
verify not completed 
 
Receive Data:84 A9 61 00 02 30 1B 04 
 
Indicate voice SYNC is received 
 
Receive Data:84 A9 61 00 02 30 7B 11 
 DMR_SLOT_TYPE message. CC is 1. Data type is Voice LC Header 
 
Receive Data:84 A9 61 00 04 30 76 00 00 00 
 DMR_FLC message 
 
Receive Data:84 A9 61 00 04 30 50 xx xx xx 
 DIGC_CALLED_ID_BIN 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
107
Receive Data:84 A9 61 00 04 30 51 xx xx xx 
 DIGC_OWN_ID_BIN 
 
Receive Data:84 A9 61 00 05 30 7D xx xx xx xx 
 DIGC_CALLED_ID_BCD 
 
Receive Data:84 A9 61 00 05 30 7E xx xx xx xx 
 DIGC_OWN_ID_BCD 
 
Receive Data:84 A9 61 00 02 30 27 00 
 CALL_MATCH message, indicating a valid DMR call is received, and called ID and CC 
are matched. 
2.5.1.7 Transmitter Side, End a Call 
1. Drop the call with CALL_STOP command 
Command ID: DMR_CALL_STOP 
Send Command: 84 A9 61 00 01 03 21  
receive command: 84 A9 61 00 02 03 21 00 
 
2. When the END message is sent out, CT3258 responds with ACK_MESSAGE (0x17 0x0A) 
 
2.5.1.8 Receiver Side, End a Call 
When the transmitter stops the call, CT3258 receives LC terminator from the far end, and report it 
with DMR_SLOT_TYPE to the MCU. 
 
Receive Data:84 A9 61 00 02 30 7B 11 
 DMR_SLOT_TYPE message. CC is 1. Data type is Voice LC Terminator.  
 
2. After receiving DMR_SLOT_TYPE, the receiver can then drop the carrier with 
CARRIER_READY command 
Command ID: 
DMR_CARRIER_READY 
Send 
Command: 84 A9 61 00 02 00 19 00 
Receive 
Data:84 A9 61 00 02 00 19 00 
2.5.2 DMR Voice Call in DMR Layer 2 Mode 
A voice call involves the transmitter and the receiver. In both side, the MCU is the main controller, 
controlling the RF circuit, the MMI and CT3258. Before the call, the MCU should set the RF 
circuit in TX mode for the transmitter and in RX mode for the receiver.  The sub-section below 
only describes the interaction between the MCU and CT3258. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
108
2.5.2.1 Initial Setting for both the Transmitter and the Receiver 
1. Set Vocoder type with VOCODER_SEL. An up to 2-3 seconds delay is required to down load 
the vocoder from the flash. 
Command ID: 
VOCODER_SEL 
Send Command: 84 A9 61 00 02 00 10 04 
Receive 
Data:84 A9 61 00 02 00 10 00 
 
2. Set CT3258 to layer 2 mode with PROCESS_MODE command 
Command ID: 
PROCESS_MODE 
Send Command: 84 A9 61 00 02 00 1A 02 
Receive 
Data:84 A9 61 00 02 00 1A 00 
 
3. Set Color Code corresponding to the RF Channel with DMR_CC command 
Command ID: 
DMR_CC 
Send Command: 84 A9 61 00 02 08 77 01 
Receive 
Data:84 A9 61 00 02 08 77 00 
 
4. Set DMR call options with DMR_CALL_OPTION command 
Command ID: 
DMR_CALL_OPTION 
Send Command: 84 A9 61 00 06 08 79 41 00 10 00 00  
Receive 
Data:84 A9 61 00 02 08 79 00 
 
(In this particular command, CT3258 is set to do SQ detection; slotted mode, with unused slot 
filled with zeros; SLOT verified number is 1).  
2.5.2.2 Initial Setting for the Receiver 
 Set the demodulator gain with DEMOD_GAIN command 
 Set the types of field to report when receiving a call with REPORT_FIELD command 
2.5.2.3 Initial Setting for the Transmitter 
1. Set the modulator gain with MOD_GAIN command 
 
2.5.2.4 Receiver Side, Start a Call 
1. 
Set CT3258 in RX or DUPLEX with WORK_MODE command 
Command ID: 
WORK_MODE_RX 
Send Command: 84 A9 61 00 04 00 18 01 00 00 
Receive 
Data:84 A9 61 00 02 00 18 00 
2. 
Set which slot to receive with DMR_CALL_SLOT command 
Send Command: 84 A9 61 00 02 08 6F 01 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
109
Receive 
Data:84 A9 61 00 02 08 6F 00 
(For mobile to mobile call, the slot number is 0) 
 
3. 
When detecting carrier, inform CT3258 that carrier is ready with CARRIER_READY 
command 
Command ID: 
DMR_CARRIER_READY 
Send Command: 84 A9 61 00 02 00 19 {0x01 or 0x02} 
Receive 
Data:84 A9 61 00 02 00 19 00 
 
After the call from transmitter arrives, CT3258 reports useful information. The MCU decides 
whether to accept or discard the call.  
2.5.2.5 Transmitter Side, Start a Call 
1. Set which slot to transmit with DMR_CALL_SLOT command. If MS call is to be placed, the 
slot number is 0. Otherwise, slot 1 or slot 2 is selected 
Command ID: 
DMR_CALL_SLOT 
Send Command: 84 A9 61 00 02 08 6F 81 
Receive 
Data: 84 A9 61 00 02 08 6F 00 
 
2. Set CT3258 in TX mode with WORK_MODE command 
Command ID: 
WORK_MODE_TX 
Send Command: 84 A9 61 00 04 00 18 02 00 00 
Receive 
Data: 84 A9 61 00 02 00 18 00 
 
3. Send LC with DIGC_DATA_FRAME (CC can be sent in the same packet) 
Command ID: 
DIGC_DATA_FRAME 
Send Command: 84 A9 61 00 0E 08 77 01 43 01 09 00 00 00 00 00 01 00 00 01 
Receive 
Command: 84 A9 61 00 01 20 43  
 
4. Start the call by sending super frame with DIGC_DATA_FRAME 
Command ID: 
PROTOCOL_DATA_FRAME 
Send Command: 84 A9 61 00 0E 08 77 01 43 11 09 00 00 00 00 00 01 00 00 01 
Receive 
Command: 84 A9 61 00 01 20 43 
2.5.2.6 Receiver Side, after a Call is Received 
Receive Data: 84 A9 61 00 02 30 7F 87 
 DMR_SLOT_FOUND message. The content is TACT in the CACH, BS call, SLOT 
verify not completed 
 
Receive Data:84 A9 61 00 02 30 7F A9 
 DMR_SLOT_FOUND message. The content is TACT in the CACH, BS call, SLOT 
verify completed, with no need to invert slot numbers in previous DMR_SLOT_FOUND 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
110
message. At this point, the mobile station is synchronized with the base station. If the 
mobile station wishes to start a call, it needs to check the AT bit in the TACT of CACH, 
and proceed if it is not busy. 
 
Receive Data: 84 A9 61 00 0E 30 77 01 43 01 09 00 00 00 00 00 01 00 00 01 
 This message contains two fields, DMR_CC and DIGC_DATA_FRAME. CC is 0x01. 
The content in the data frame is data burst at SLOT1, length of 9, and Voice LC header.  
 
Receive Data: 84 A9 61 00 0E 30 77 01 43 11 09 00 00 00 00 00 01 00 00 01 
 This message contains two fields, DMR_CC and DIGC_DATA_FRAME. CC is 0x01. 
The content in the data frame is voice super frame at SLOT1, length of 9, and Voice LC 
header. Once CT3258 receives and reports one voice super frame, it won’t report 
subsequent voice super frame. But it continues to track the synchronization of the base 
station, and report 0x1B 0x08 if the synchronization is lost, which the MCU can use as 
an indication of call lost. 
2.5.2.7 Transmitter Side, End a Call 
1. Stop the call by sending Terminator LC. Once CT3258 has sent all message to the far end, it 
reports 17 0A to the MCU 
Command ID: 
PROTOCOL_DATA_FRAME 
Send Command: 84 A9 61 00 0c 08 43 02 09 00 00 00 00 00 01 00 00 01 
Receive 
Command: 84 A9 61 00 01 20 43  
Receive 
Command: 84 A9 61 00 02 20 17 0A 
2.5.2.8 Receiver Side, End a Call 
When the transmitter stops the call, CT3258 receives LC terminator from the far end, and report it 
with DIGC_DATA_FRAME to the MCU  
 
Receive Data:84 A9 61 00 0E 30 77 01 43 02 09 00 00 00 00 00 01 00 00 01 
 This message contains two fields, DMR_CC and DIGC_DATA_FRAME. CC is 0x01. 
The content in the data frame is data burst at SLOT1, length of 9, and Voice LC 
Terminator.  
 
1. Drop the carrier with CARRIER_READY command 
Command ID: 
DMR_CARRIER_READY 
Send Command: 84 A9 61 00 02 00 19 00 
Receive 
Data:84 A9 61 00 02 00 19 00 
2.5.3 Analog Voice Call in DMR Mode 
CT3258 support dual mode operation with digital and analog calls. For analog call, CT3258 
supports CTCSS/DCS sub-audio signals. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
111
2.5.3.1 Receiver Side, Start a Call 
1. Set CT3258 to analog call mode with PROCESS_MODE command 
2. Set CT3258 in RX or DUPLEX with WORK_MODE command  
3. Set CTCSS/DCS settings with SUB_AUDIO command 
4. When detecting carrier, inform CT3258 that carrier is ready with CARRIER_READY 
 
After the call from transmitter arrives, CT3258 reports whether CTCSS/DCS is matched or not 
with SUB_AUDIO command. 
2.5.3.2 Transmitter Side, Start a Call 
1. Set CT3258 to analog call mode with PROCESS_MODE command 
2. Set CT3258 in TX or DUPLEX with WORK_MODE command 
3. Set CTCSS/DCS settings with SUB_AUDIO command 
4. Start the call with DMR_CALL_START command 
2.5.3.3 Receiver Side, End a Call 
1. Drop the carrier with CARRIER_READY command 
2.5.3.4 Transmitter Side, End a Call 
1. Drop the call with CALL_STOP command 
 
2.6 Gain Calibration 
This is the first step of calibration. It calibrates the receiver path to calculate SQ_LEVEL correctly 
without being affected by gains variation in the analog path.. 
 
For SCT3700, follow these steps: 
1. 
Feed -60dbm FM signal (eg. by HP8920) to receiver and make chip run in receiver mode 
2. 
Adjust “GAIN_ADJUST” till WB_RSSI equals to -60dbm 
 
Note that if external LNA is used, it needs to be disable when doing GAIN calibration. 
 
Command ID: READ_RSSI 
Send Command: 84 A9 61 00 01 20 6C 00 
Receive 
Data: 84 A9 61 00 07 23 6C 00 3B 00 37 00 00 
 
For example, 0x3B-137 = -78dbm, which means there is -18db mismatch. So we set 
GAIN_ADJUST to 0xee, and send 
Command ID: WRITE_RSSI 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
112
Send Command: 84 A9 61 00 0D 00 6C EE 00 00 30 10 00 04 00 10 00 04 00  
Receive 
Data:84 A9 61 00 02 00 6C 00 
 
After that when we read again, it results, 
Command ID: READ_RSSI 
Send Command: 84 A9 61 00 01 20 6C 00 
Receive 
Data: 84 A9 61 00 07 23 6C 00 4C 00 36 00 00 
 
This time 0x4c-137 = -61dbm is almost correct, +/-1db is ignorable.  
 
3. 
Enable external LNA if it is used 
Command ID: 3700CONFIG 
Send Command: 84 A9 61 00 03 00 6D 0F 00 00 
Receive 
Data:84 A9 61 00 02 00 6D 00 
 
4. 
Adjust “EXT LNA_GAIN” till WB_RSSI equals to -60dbm 
Command ID: readrssi 
Send Command: 84 A9 61 00 01 20 6C 00 
Receive 
Data: 84 A9 61 00 07 23 6C 00 6D 00 18 00 00 
 
0x6D-137 = -28dbm, which means 32db mismatch. So we set EXTLNA_VAL[5:0]=0x20, 
EXTLNA_VAL[7:6]=3 which is determined by 0x20-(0x4C-0x3B)=15dB 
Bit7-Bit6 
     Value 
    11 
    12<value 
    10 
    6< value≤12 
    01 
    0<value≤6 
 
Command ID: WRITE_RSSI 
Send Command: 84 A9 61 00 0D 00 6C EE E0 00 30 10 00 04 00 10 00 04 00 
Receive 
Data:84 A9 61 00 02 00 6C 00 
 
Then read WB_RSSI again, where 0x4D-137 = -60dbm. 
Command ID: READ_RSSI 
Send Command: 84 A9 61 00 01 20 6C 00 
Receive 
Data: 84 A9 61 00 07 23 6C 00 4D 00 18 00 00 
 
Up till now, RX gain calibration is done. 
 
2.7 DC and IQ Calibration 
DC and IQ calibration of SCT3700 can be performed after gain calibration is done. Make sure that 
“GAIN ADJUST” and “EXT LNA GAIN” are set correctly before proceeding to this section.  
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
113
 
Before starting, the user should be familiar with these 3 commands. 
 
Command ID: 
DC_OFFSET_READ 
Send 
Command: 84 A9 61 00 02 20 39 05 
Receive 
Command:84 A9 61 00 0f 20 39 “RXDCI” “RXDCQ” “AMPI” “AMPQ” 
“TXDC_high” ”TXDC_low” “AMPCOMP” 
 
Command ID: 
DC_OFFSET_WRITE 
Send 
Command: 84 A9 61 00 0d 00 39 “ADC_DCI” “ADC_DCQ” “DAC_DCI” “DAC_DCQ” 
“DAC_GAINI” “DAC_GAINQ” 
Receive 
Command:84 A9 61 00 00 02 39 00 
 
Command ID: 
IQCOMP_COEF_WRITE 
Send 
Command: 84 A9 61 00 0A 00 42 “cali_setting” “rx_coef_amp” “rx_coef_phi” 
“tx_coef_amp” “tx_coef_pha” 
Receive 
Command:84 A9 61 00 00 02 42 00 
 
 
1. Boot CT3258. Don’t select any vocoder.  
Put SCT3700 into calibration loop back mode with command 
Command ID: 
WORK_MODE_CALIBRATOIN 
Send 
Command: 84 A9 61 00 04 00 18 43 00 00 
Receive 
Command:84 A9 61 00 02 00 18 00   
 
2. Set the SCT3700 RF to transmit a carrier at frequency Fc+Fif  (Fif = 1050 kHz for example).  
 
3. Set the SCT3700 RF to receiver at frequency Fc. After the down conversion by the RF front 
end, IQ signals of frequency Fif are at the input of CT3258.  
 
4. Disable IQ calibration filter. 
Command ID: 
IQCOMP_COEF_WRITE 
Send 
Command: 84 A9 61 00 0A 00 42 44 00 00 00 00 00 00 00 00 
Receive 
Command:84 A9 61 00 02 00 42 00 
 
5. Disable IF dc filter 
Command ID: 
MISC_GAIN 
Send 
Command: 84 A9 61 00 0D 00 6B 08 00 08 00 08 00 00 00 01 00 00 00 
Receive 
Command:84 A9 61 00 02 00 6B 00 
Clear all the dc offset 
Command ID: 
DC_OFFSET_WRITE 
Send 
Command: 84 A9 61 00 0d 00 39 00 00 00 00 00 00 00 00 00 00 00 00 
Receive 
Command:84 A9 61 00 00 02 39 00 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
114
6. Force PGA gain to “0” 
Command ID: 
RSSI_WRITE 
Send 
Command: 84 A9 61 00 0d 00 6C “GAIN ADJUST” “EXT LNA GAIN” 80 00 10 00 04 00 
10 00 04 00 
Receive 
Data:84 A9 61 00 02 00 6C 00 
  Note that “GAIN ADJUST” and “EXT LNA GAIN” should be set to the values obtained from 
last section. 
 
7. Read the DC offset “RXDCI” and “RXDCQ” with command DC_OFFSET read command 
(100 milliseconds average in this example) 
Command ID: 
DC_OFFSET_READ 
Send 
Command: 84 A9 61 00 02 20 39 05 
Receive 
Command:84 A9 61 00 0f 20 39 “RXDCI” “RXDCQ” “AMPI” “AMPQ” 
“TXDC_high” ”TXDC_low” “AMPCOMP” 
 
8. Write the above DC compensation value “RXDCI” and “RXDCQ” with DC_OFFSET write 
command 
Command ID: 
DC_OFFSET_WRITE 
Send 
Command: 84 A9 61 00 0d 00 39 “ADC_DCI” “ADC_DCQ” “DAC_DCI” “DAC_DCQ” 
“DAC_GAINI” “DAC_GAINQ” 
Receive 
Command:84 A9 61 00 00 02 39 00 
 
The user can start with ADC_DCI = RXDCI, ADC_DCQ = RXDCQ. DAC_DCI and DAC_DCQ 
should be zero.  
 
9. Repeat 6 and 7 until minimum RXDCI and RXDCQ is obtained. This completes the RX DC 
calibration for this PGA level. 
 
10. Put RX IQ compensation filter in calibration mode by issue IQCOMP_COEF command with 
RX_IQ_MODE bit set to 1 and TX_IQ_MODE bit to 1 
Command ID: 
IQCOMP_COEF_WRITE 
Send 
Command: 84 A9 61 00 0A 00 42 44 “rx_coef_amp” 00 00 00 00 00 00 
Receive 
Command:84 A9 61 00 00 02 42 00  
 
Start rx_coef_amp = 0; 
Then configure rx_coef_amp = “AMPCOMP” from step 15. 
 
11. Next, start doing RX IQ calibration for this PGA level. Please note whenever you send the  
“39” command, you should make sure that you use the correct “ADC_DCI” “ADC_DCQ” 
accordingly.  
 
 
12. Read the amplitude of the signal at I and Q path with command DC_OFFSET read command 
(100 milliseconds average in this example). Here we should configure the “DAC_GAINI” 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
115
“DAC_GAINQ” to make sure amplitude big enough (“AMPI” / “AMPQ”is larger than 0x1000 
and smaller than 0x7000).  
 
Command ID: 
DC_OFFSET_READ 
Send 
Command: 84 A9 61 00 02 20 39 05 
Receive 
Command:84 A9 61 00 0f 20 39 “DCI” “DCQ” “AMPI” “AMPQ” ”TXDC_high” 
“TXDC_low” “AMPCOMP”   
 
Send 
Command: 84 A9 61 00 0d 00 39 “ADC_DCI” “ADC_DCQ” “DAC_DCI” “DAC_DCQ” 
“DAC_GAINI” “DAC_GAINQ” 
Receive 
Command:84 A9 61 00 00 02 39 00 
 
13. Write AMPCOMP until AMPI and AMPQ are almost equal. 
Command ID: 
IQCOMP_COEF_WRITE 
Send 
Command: 84 A9 61 00 0A 00 42 44 “AMPCOMP” 00 00 00 00 00 00 
Receive 
Command:84 A9 61 00 00 02 42 00 
 
14. Put RX IQ compensation filter in normal mode by issue IQCOMP_COEF command with 
RX_IQ_MODE bit set to 0  
Command ID: 
IQCOMP_COEF_WRITE 
Send 
Command: 84 A9 61 00 0A 00 42 00 “rx_coef_amp” “rx_coef_phi” 00 00 00 00 
Receive 
Command:84 A9 61 00 00 02 42 00 
 
Start rx_coef_phi = 0; 
Then configure rx_coef_phi = “AMPCOMP” from step 18. 
 
15. Read the amplitude of the signal at I and Q path with command DC_OFFSET read command 
(100 milliseconds average in this example) 
Command ID: 
DC_OFFSET_READ 
Send 
Command: 84 A9 61 00 02 20 39 05 
Receive 
Command:84 A9 61 00 09 20 39 “DCI” “DCQ” “AMPI” “AMPQ””TXDC_high” 
“TXDC_low” “AMPCOMP” 
 
16. Repeat step 17, 18 until AMPI and AMPQ are equal. 
 
17. To complete whole RX DC and RX IQ calibration for all PGA levels, please repeat step 7 to 
step 16 each time with different PGA setting. PGA gain totally has 6 steps from 0-5. 
Command ID: forceagcgain 
Send 
Command: 84 A9 61 00 0d 00 6C “GAIN ADJUST” “EXT LNA GAIN” 80 00 10 00 04 00 
10 00 04 00 
Repeat step 7-16 
 
Command ID: RSSI_WRITE 
Send 
Command: 84 A9 61 00 0d 00 6C “GAIN ADJUST” “EXT LNA GAIN” 81 00 10 00 04 00 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
116
10 00 04 00 
Repeat step 7-16 
 
Command ID: RSSI_WRITE 
Send 
Command: 84 A9 61 00 0d 00 6C “GAIN ADJUST” “EXT LNA GAIN” 82 00 10 00 04 00 
10 00 04 00 
Repeat step 7-16 
 
Command ID: RSSI_WRITE 
Send 
Command: 84 A9 61 00 0d 00 6C “GAIN ADJUST” “EXT LNA GAIN” 83 00 10 00 04 00 
10 00 04 00 
Repeat step 7-16 
 
Command ID: forceagcgain 
Send 
Command: 84 A9 61 00 0d 00 6C “GAIN ADJUST” “EXT LNA GAIN” 84 00 10 00 04 00 
10 00 04 00 
Repeat step 7-16 
 
Command ID: forceagcgain 
Send 
Command: 84 A9 61 00 0d 00 6C “GAIN ADJUST” “EXT LNA GAIN” 85 00 10 00 04 00 
10 00 04 00 
Repeat step 7-16 
 
18. Next step is to calibrate TX DC offset. Set “DAC_GAINI” “DAC_GAINQ” to 0. This results 
in zero tx baseband I/Q out. 
Command ID: DC_OFFSET_WRITE 
Send Command: 84 A9 61 00 0d 00 39 “ADC_DCI” “ADC_DCQ” “DAC_DCI” “DAC_DCQ” 00 
00 00 00 
Receive Command:84 A9 61 00 00 02 39 00 
 
Command ID: DC_OFFSET_READ 
Send Command: 84 A9 61 00 02 20 39 05 
Receive Command:84 A9 61 00 0f 20 39 “RXDCI” “RXDCQ” “AMPI” “AMPQ” 
“TXDC_high” ”TXDC_low” “AMPCOMP” 
 
 
The initial value for “DAC_DCI” and “DAC_DCQ” should be zero (00 00 00 00) 
 
19. Adjust “DAC_DCI” and “DAC_DCQ” and until minimum DC leakage is obtained (indicated 
by ”TXDC_high” “TXDC_low”). “TXDC_high” and “TXDC_low” constitute a 32 bit value 
that indicates the DC leakage energy. The larger the value, the more the DC leakage.  
Suggested procedure: 
You can adjust DAC_DCQ first to get minimum leakage. For example use 0x0100 as a 
coarse step and 0x0010 as a fine step. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
117
 
Then adjust DAC_DCI to get minimum leakage. 
 
Again fine adjust DAC_DCQ. 
 
And Fine adjust DAC_DCI again till leakage is minimum. 
 
 
This complete the SCT3700 RX IQ calibration as well and RX DC and TX DC calibration process. 
The next step is TX IQ calibration. However, in most cases, TX IQ calibration is not necessary as 
SCT3700 is used in zero IF mode. Skip the steps below unless there is large TX IQ mismatch and 
SCT3700 is used in low IF mode. 
 
 
20. Set the SCT3700 RF to transmit a carrier at frequency Fc. Now both SCT3700 TX and RX are 
using the same carrier frequency. 
 
21. Generate a 1050 Hz sinusoidal I Q signal at the CT3258 TX side, with zero amplitude 
Command ID: 
MISC_GAIN 
Send 
Command: 84 A9 61 00 0D 00 6B 08 00 08 00 08 00 18 00 08 00 08 00 
Receive 
Command:84 A9 61 00 02 00 6B 00 
22. Put TX IQ compensation filter by issue IQCOMP_COEF command with TX_IQ_MODE bit 
set to 1 
Command ID: 
IQCOMP_COEF_WRITE 
Send 
Command: 84 A9 61 00 0A 00 42 04 “rx_coef_amp” “rx_coef_phi” “tx_coef_amp” 00 00 
Receive 
Command:84 A9 61 00 00 02 42 00 
 
23. Read the amplitude of the signal at I and Q path with command DC_OFFSET read command 
(100 milliseconds average in this example) 
Command ID: 
DC_OFFSET_READ 
Send 
Command: 84 A9 61 00 02 20 39 05 
Receive 
Command:84 A9 61 00 09 20 39 “DCI” “DCQ” “AMPI” “AMPQ”   
 
24. Repeat 23, 24 until AMPI and AMPQ are equal 
 
25. Put TX IQ compensation filter in normal mode by issue IQCOMP_COEF command with 
TX_IQ_MODE bit to 0 
Command ID: 
IQCOMP_COEF_WRITE 
Send 
Command: 84 A9 61 00 0A 00 42 00 “rx_coef_amp” “rx_coef_phi” “tx_coef_amp” 
“tx_coef_phi” 
Receive 
Command:84 A9 61 00 00 02 42 00 
 
26. Read the amplitude of the signal at I and Q path with command DC_OFFSET read command 
(100 milliseconds average in this example) 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
118
Command ID: 
DC_OFFSET_READ 
Send 
Command: 84 A9 61 00 02 20 39 05 
Receive 
Command:84 A9 61 00 09 20 39 “DCI” “DCQ” “AMPI” “AMPQ”   
 
27. Repeat 26, 27 until AMPI and AMPQ are equal. This completes the TX IQ calibration. 
 
2.8 Error Handling 
CT3258 responds to every packet received from the MCU, within T_rsp time, even it has parity 
error. Currently T_rsp = 40 milliseconds. 
 
When the received packet has parity error, CT3258 responds with ACK_MESSAGE with parity 
error indication. 
 
If the MCU does not receive a message from the CT3258 within T_rsp time, or receives an 
ACK_MESSAGE with parity error indication, or the received response message has parity error, it 
can consider the message lost, and resend the message if necessary. 
 
For messages that initiated by CT3258 (not as response to MCU command), the MCU checks 
parity error if parity check is enabled. If parity error fails, it simply discards the message, without 
sending a parity error response. This generally falls into two categories: 
 
1. The message is DIGC_DATA_FRAME or DPMR_SLD, with which CT3258 query for new 
data to be transmitted to the far end. In the case, if parity error fails, but the MCU can figure 
from the context that it is a DIGC_DATA_FRAME or DPMR_SLD message, it send query 
result as if there is no parity error. If the MCU can not figure out from the context, it simply 
drops the packet without sending a response. 
2. The message is a CT3258 report message generated by CT3258. These types of messages do 
not require responses from the MCU. When there is a parity error, the MCU simply drops the 
message. If the MCU needs any specific information, it can send a query message to the DSP. 
2.9 DPMR Standard User Interface 
CT3258 supports the Standard User Interface described in ANNEX A of ETSI TS 102 490. 
 
With the Standard User Interface, the mobile user uses a standard telephone key pad, with digits 
‘0’ to ‘9’, plus ‘*’ and ‘#’ keys, to dial another mobile’s number. Each mobile is assigned a 7 
digital number, and one or several group numbers. At the receiver, CT3258 match the “Called 
Number” of the incoming call to its own individual number and group numbers. It reports a call 
match to the MCU if there is a match. Otherwise, it reports a not-match. 
 
Dialing with wild characters, abbreviated dialing and mask dialing are supported. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
119
2.9.1 Message Used for Standard User Interface 
2.9.1.1 Enable Standard User Interface 
To enable the Standard User Interface, the user uses message with field ADDRESSING_MODE, 
and set the mode to Configured Address Mode. The user can also set a mask for mask dialing with 
the same field. By default, mask dialing is disabled (mask length is 0). 
 
To enable layer 3 processing, so that call match is performed at the receiver, the user should set the 
process mode to 3 with PROCESS_MODE field. 
 
The follow message enables the Standard User Interface and enables layer 3 processing 
 
84 A9 61 00 04 00 1A 03 28 01 
2.9.1.2 Set Own Numbers 
The user can set its own number with DPMR_OWN_ID_BCD field. For example, the following 
message set the own number to 1234567. 
 
84 A9 61 00 05 00 53 12 34 56 70 
 
The user can also set one or several group number with GROUP_ID field. For example, the 
following message set the first group number to 1122334. GROUP_ID is 1. 
 
84 A9 61 00 05 00 29 11 22 33 41 
2.9.1.3 Set Dialed Numbers 
2.9.1.3.1 Full 7 digit Number 
 
The user can pass the dialed number to CT3258 with DPMR_CALLED_ID_BCD field. For 
example, the following message set the dialed number to 1234567. 
 
84 A9 61 00 05 00 52 12 34 56 70 
2.9.1.3.2 Wild Number Dialing 
The user can also uses wild character ‘*’ to dial a group of numbers, by replacing ‘*’ with ‘A’. For 
example, the following message set the dialed number to 123456*. 
 
84 A9 61 00 05 00 52 12 34 56 A0 
 
With this dialed number, called station with number ‘1234560’ to ‘1234569’ will respond. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
120
2.9.1.3.3 Abbreviated Dialing 
The user does not always have to dial the full number of the called station. By using abbreviated 
dialing, the user can only dial the digits of the called station number that is different than this own 
number. For example, if caller’s own number is 1234567, and the called stations number is 
1234568, the user only has to dial a single digit ‘8’. The message sent to CT3258 is thus: 
 
84 A9 61 00 05 00 52 8F FF FF F0. 
 
Note that the un-dialed digits in DPMR_CALLED_ID_BCD is filled with ‘F’. 
 
Upon receiving this message, CT3258 forms the complete Called ID by extracting the un-dialed 
from its Own ID. In this example, the full Called ID, 1234568 will be sent to the far end. 
2.9.1.3.4 Masked Dialing 
In some situation, the user is limited by the number of digits he/she can dial. To do this, the MCU 
sends a mask number (corresponding to the number of digits that is masked out for the user to dial) 
with ADDRESSING_MODE field. 
 
For example, the following message limit the number of digital user can dial to 3. 
84 A9 61 00 02 00 28 09. 
 
If caller’s own number is 1234567, and the user dials ‘789’, the message sent to CT3258 is thus: 
 
84 A9 61 00 05 00 52 78 9F FF F0. 
 
Upon receiving this message, CT3258 forms the complete Called ID by extracting the un-dialed 
from its Own ID. In this example, the full Called ID, 1234789 will be sent to the far end. 
 
If the number of digits user dial exceeds the maximum number of digits to dial, the MSB is 
discarded. In the previous examples, if user dials ‘99789’, the message sent to CT3258 is: 
 
84 A9 61 00 05 00 52 99 78 9F F0. 
 
CT3258 will remove ‘99’ and form the complete digit as ’1234789’. 
2.9.1.4 Report Call Match 
If layer 3 processing is enabled, the receiver matches the called number of incoming call to its 
own individual number or group number, and report the matching status with CALL_MATCH 
fields.  
 
CALL_MATCH is reported as long as there is an incoming call, whether or not the call is matched 
or not. 
 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
121
CALL_MATCH also report the status of Color Code match.  
 
For group call, CALL_MATCH also report the group number that matches the call. For group call 
with wild characters, the group number is 0. 
 
For examples, the following reported message from CT3258: 
 
84 A9 61 00 02 00 27 00 
 
tells the MCU that an individual call is matched, and Color Code is also matched; 
 
84 A9 61 00 02 00 27 01 
 
tells the MCU that an individual call is not matched, but Color Code is matched; 
 
84 A9 61 00 02 00 27 02  
indicates that a group call with wild characters is received, and Color Code is also matched;  
 
84 A9 61 00 02 00 27 1A  
indicates that a group call with group number 1 is received, but Color Code is not matched;  
 
It is possible that a valid call may have a mis-match on the Color Code, as Color code, unlike the 
Called ID, is not FEC protected. When the MCU receives a call with un-matched Color Code, it 
may poll SCT3250 for Color Code in subsequent voice frames through reading DPMR_CC after 
waiting 160 milli-seconds to see if it is indeed a valid call. 
 
The Called ID and Own ID information is embedded in the header frame (80 milliseconds) and in 
4 CCH frames (320 milliseconds). For normal calls with valid header frame, call match is done 
within 80 milliseconds. However, with late arrival calls, CT3258 has to extract call information 
over 4 error free CCH frames. Adding the time to synchronize FS2, the minimum time to report a 
call match is over 500 milliseconds. In case of high BER (bit error rate), the SYNC time can be 
longer. 
 
2.10 DMR Number and Dialing Plan 
CT3258 supports the Numberling Plan described in ANNEX C of ETSI TS 102 361-2. 
 
With the Standard User Interface, the mobile user uses a standard telephone key pad, with digits 
‘0’ to ‘9’, plus ‘*’ and ‘#’ keys, to dial another mobile’s number. Each mobile is assigned a 7 
digital number, and one or several group numbers. At the receiver, CT3258 match the “Called 
Number” of the incoming call to its own individual number and group numbers. It reports a call 
match to the MCU if there is a match. Otherwise, it reports a not-match. 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
122
2.10.1 Message Used for DMR Dialing Plan 
2.10.1.1 Set Own Numbers 
The user can set its own number with DMR_OWN_ID_BCD field. For example, the following 
message set the own number to 1234567. 
 
84 A9 61 00 05 00 7E 01 23 45 67 
 
The user can also set one or several group number with GROUP_ID field. For example, the 
following message set the first group number to 1122334. 
 
84 A9 61 00 05 00 29 11 22 33 41 
2.10.1.2 Set Dialed Numbers 
2.10.1.2.1 Full 8 digit Number 
The user can pass the dialed number to CT3258 with DMR_CALLED_ID_BCD field. For 
example, the following message set the dialed number to 1234567. 
 
84 A9 61 00 05 00 7D 01 23 45 67 
2.10.1.2.2. All Call Dialing 
The user can use All Call Dialing. See the derails in the table. 
BCD ID 
Remark 
84 A9 61 00 05 00 7D 00 aa aa(00******) 
All Talkgroup ID0 
84 A9 61 00 05 00 7D 01 aa aa(01******) 
All Talkgroup ID1 
etc. 
etc. 
84 A9 61 00 05 00 7D 09 aa aa(09******) 
All Talkgroup ID9 
84 A9 61 00 05 00 7D 0a aa aa(0*******) 
All Talkgroup 
 
2.10.1.3 Report Call Match 
In Easy Mode, the receiver matches the called number of incoming call to its own individual 
number or group number, and report the matching status with CALL_MATCH fields.  
 
CALL_MATCH is reported as long as there is an incoming call, whether or not the call is matched 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
123
or not. 
 
CALL_MATCH also report the status of Color Code match.  
 
For group call, CALL_MATCH also report the group number that matches the call. 
 
For examples, the following reported message from CT3258: 
 
84 A9 61 00 02 00 27 00 
 
tells the MCU that an individual call is matched, and Color Code is also matched; 
 
84 A9 61 00 02 00 27 01 
 
tells the MCU that an individual call is not matched, but Color Code is matched; 
 
84 A9 61 00 02 00 27 02  
indicates that a group call is received, and Color Code is also matched;  
 
84 A9 61 00 02 00 27 1A  
indicates that a group call with group number 1 is received, but Color Code is not matched;  
 
It is possible that a valid call may have a mis-match on the Color Code, as Color code, unlike the 
Called ID, is not FEC protected. When the MCU receives a call with un-matched Color Code, it 
may poll SCT3250 for Color Code in subsequent frames. 
  
The Called ID and Own ID information is embedded in the header frame (30 milliseconds) and in 
6 voice frames (360 milliseconds). For normal calls with valid header frame, call match is done 
within 30 milliseconds. However, with late arrival calls, CT3258 has to extract call information 
over 6 error free voice frames, or 360 milliseconds. In case of high BER (bit error rate), the SYNC 
time can be longer. 
 
2.11 Power Saving Mode 
The host can put CT3258 into low power modes with command CHIP_LOWPOWER (field type 
0x15). The low power modes are listed below.  
 
0: Normal 
1: Reserved 
2: Reserved 
3: Power down certain peripheral of CT3258 including serial port, DMA and timers. 
4: CT3258 enters IDLE mode 
5: CT3258 enters Sleep mode 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
124
6: CT3258 enters Halt mode 
 
If CT3258 is in power saving mode lower or equal to 4, it can be waken up with command 
CHIP_LOWPOWER with field value 0 (normal power mode). CT3258 resume all states before it 
enters the lower power mode. 
 
If CT3258 enters power saving mode 5, it can be waken up with INT0. CT3258 resume all states 
before it enters the lower power mode. 
 
If CT3258 enters power saving mode 6, it can be waken up with NMI. Once NMI is received by 
CT3258, it restarts the CT3258. All information sent to CT3258 is lost and need to be reinitialized. 
The difference of reset with NMI and reset with RESET chip is that firmware would not need to 
be reloaded with NMI. 
 
The same command can be used to power down the external vocoder and codec by setting bit 5 
and bit 5 of field value. 
2.12 Codec Selection 
CT3258 has native support for the following two codecs: 
 
TI TLV320AIC3204 
Wolfson WM8758B 
 
TLV320AIC3204 and WM8758B are stereo codecs. With a stereo codec, the left ADC is 
connected to Microphone input, the right ADC is connected to the FM demod port. The right DAC 
is connected to the VCTCXO port, while the left DAC is connected to the audio line port in the 
RX mode and the VCO port in the TX mode. 
 
The codec can be selected with CODEC_SELECT command (field ID 0x2D). 
 
Other codecs can be used with CT3258 if it supports I2C interface and conforms to the serial 
format of CT3258 high speed serial port. 
2.13 Codec Configurations 
The host can send I2C command to codec through CT3258. The commands are sent to CT3258 
via HPI interface, with bit 6 of TYPE field set to 1. Upon receiving such commands, CT3258 
extracts information from the packet after the TYPE fields, and adds I2C address of the codec, and 
sends the information to the codec via I2C interface. 
 
To configure codec, the host first sends the I2C address of the codec to CT3258 with command 
SET_I2C_ADDRESS. It then can send codec configuration command directly to the codec by 
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
125
setting the packet type to be 0x40. 
 
For example, to send command to WM8758B to reset it, the user can use the following 
commands: 
Command ID: SET_I2C_ADDRESS 
Send 
Command: 84 A9 61 00 02 03 2E 34 
Receive Command:84 A9 61 00 02 03 2E 00  
Command ID: CODEC_COMMAND 
Send 
Command: 84 A9 61 00 02 40 00 00 
Receive Command:84 A9 61 00 02 40 17 00 
 
When CT3258 receives the above command from the host, it extract “00 00” from the command, 
and 0x34 to the beginning, and sends “0x34, 0, 0” to the codec via I2C interface. 
2.14 Debug Mode 
2.14.1 Setting Up Two Point Modulation 
CT3258 has two outputs in TX mode connecting to VCO and VCTCXO port of the RF unit to 
facilitate 2 point modulation. The user should refer to “CT3258 Application Notes – Analog 
Interface Setup” for details on how to adjust two point modulation. 
2.14.2 BER Test 
To check the link quality, CT3258 can be configured to do BER test.  
 
The user should refer to “CT3258 Application Notes – Analog Interface Setup” for details on how 
to configure for BER test.. 
2.14.3 Loop Back 
To verify the different part of CT3258 hardware and software, a set of loop backs can be enabled. 
The following loop back modes are especially useful in verifying external codec and vocoder 
connection of CT3258. 
2.14.3.1 Audio Codec Loop Back and Modem Codec Loop Back 
With audio codec loop back, the audio signal from the microphone goes through the ADC in the 
TX path and loops back to the DAC in the RX path, and sent out to the headphone output. 
 
With modem codec loop back, the modem signal from the DEMOD_Q port goes through the ADC 
in the RX path and loops back to the DAC in the TX path, and sent out to the MOD_Q port.   
Packet Interface of CT3258 
Copy Rights © 2015, Wuxi Sicomm Communication Technologies, Inc & Celetra, Inc 
126
 
The user can apply signal generated at the input and monitor the output with a scope. The correct 
operation of audio codec loop back and modem codec loop indicate the correct connection of 
external codec and the analog audio and modem path. 
 
To set up for audio codec loop back and modem codec loop back, the user should follow these 
steps: 
 
Send command to set CT3258 in audio codec loop back mode: 
ALOOP_CODEC_LOOP: 61 00 04 00 18 03 11 00 
 
The user should then be able to hear his voice from the headphone, and see the signal from a 
scope. 
2.14.3.2 Audio Vocoder Loop Back 
With audio vocoder loop back, the audio signal from the microphone goes through the ADC, the 
decimator, the voice encoder in the TX path and loops back to the voice decoder, the interpolator 
and the DAC in the RX path, and sent out to the headphone output.   
 
Correct vocoder loop back indicate correct operation of the external vocoder (e.g. AMBE3000). 
 
To set up for audio vocoder loop back, the user should follow these steps: 
 
Send command to set CT3258 in audio vocoder loop back mode: 
ALOOP_VOCODER_LOOP: 61 00 04 00 18 03 03 00 
 
The user should then be able to hear his voice from the headphone.